New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Thermal convection in a horizontal porous layer with spatially periodic boundary temperatures: small Ra flow

This study considers a small Rayleigh number thermal convection in a fluid-saturated porous medium between two infinite-horizontal walls. The lower and upper walls have sinusoidal temperature distributions with a wave number and a phase difference, and the effect of the parameters on the flow and heat transfer characteristics is investigated. For a given wave number, an out-of-phase configuration yields minimum heat transfer at the walls. Maximum heat transfer occurs at the wave number of 2.286 with an in-phase configuration.     

Superconductivity in Lithium- and Sodium-Doped Mercury-Based Cuprates

The effect of Na- and Li-doping in Hg-based cuprates has been studied. It has been found that superconductivity can be achieved in samples containing small amount of Na or Li. While little change is found in the crystalline structure, the formed superconducting phase have the onset T_c typically above 140 K and zero-resistance T_c up to 136K. More interestingly, the processing temperature for the doped Hg-1223 can be reduced significantly to near 700 °C which is promising for thin films growth on many technologically compatible substrates.     

Nicalon-fibre-reinforced silicon-carbide composites via polymer solution infiltration and chemical vapour infiltration

A new, faster process was developed for the fabrication of Nicalon-fibre-reinforced SiC composites by combining polymer solution infiltration (PSI) and chemical vapour infiltration (CVI). The process led to the near-net-shape fabrication of fibre-reinforced ceramic-matrix composites and reduced infiltration time. Typical flexural strength and fracture toughness of these composites were 296 MPa and 10.9 MPa m^1/2 at room temperature (RT) and 252 MPa and 9.6 MPa m^1/2 at 1000 °C, respectively. The composites exhibited load-carrying capability after crack initiation.     

Dental plaque flora of the dog with reference to fastidious and anaerobic bacteria associated with bites

Animal bite wounds are amongst the most common types of traumatic injuries in humans. The organisms isolated from these wounds generally reflect the oral flora of the biting animal, and may be fastidious in nature and difficult to identify. This study was undertaken to determine the prevalence of Eikenella corrodens, Actinobacillus actinomycetemcomitans, Porphyromonas and Prevotella spp. in supragingival dental plaque collected from the right maxillary canine and carnassial teeth and the right mandibular canine tooth of dogs. In part one of the study, 30 dogs were used. E. corrodens was found in 62% of these dogs and 44% of individual plaque samples. A. actinomycetemcomitans was not detected in any of the dogs sampled. In part two, 34 dogs were used to determine the prevalence of the black pigmented anaerobic bacilli (Porphyromonas and Prevotella spp.). Porphyromonas gingivalis was present in 68% of these dogs and 47% of individual plaque samples. Prevotella intermedia was present in 44% of the dogs and 23% of individual plaque samples. The recently described Porphyromonas canoris, Porphyromonas salivosa, Porphyromonas cangingivalis, Porphyromonas cansulci, Porphyromonas crevioricanis and Prevotella denticola species were isolated from only 9%, 6%, 3%, 3%, 3% and 3% of dogs respectively. Porphyromonas gingivicanis was not isolated from any of the animals sampled. In conclusion, black-pigmented anaerobic bacilli were isolated from 91% of the animals sampled and therefore constitute a significant risk with respect to bite wound infections. It is also suggested that the prevalence of E. corrodens in wound infections has been underestimated in previous reports because of use of inappropriate techniques for detecting this organism.     

Analysis of color symbology from the perspective of cultural semiotics focused on Korean costume colors according to the cultural changes

The purpose of this study was to analyze the symbolization of colors as cultural codes, based on costume colors. In order to study the significance of colors in cultural changes, we carried out a quantitative analysis and interpreted it from the perspective of cultural semiotics. The range of this study was focused on Korean costume colors, over diverse diachronic stages of Korean culture. For this study 1535 color samples were collected, measured with a spectrophotometer, and analyzed quantitatively according their diachronic stages of origin. As a result, red, blue, and yellow were found to be the most frequently used colors during the Chosun Dynasty, a period based on Confucianism. These colors acted as cultural codes with cultural significance. During the Modern times pink, light blue, and black increased in frequency and represented the reception of western culture, the changing sex role of women in society, and utilitarianism. In these days, neutral colors and grayish tones of all colors are the most significant colors of high frequency. The use of such colors is closely related to industrialization, mechanization, functionalism, and the changes of women's sex roles in the societies. They are used as cultural codes, especially to emphasize a rational and masculine image rather than a feminine image. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 71–79, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20290     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451