A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

LTCC‐based monolithic system‐in‐package (SiP) module for millimeter‐wave applications

A miniature LTCC system‐in‐package (SiP) module has been presented for millimeter‐wave applications. A typical heterodyne 61 GHz transmitter (Tx) has been designed and fabricated in a type of the SiP module as small as 36 × 12 × 0.9 mm³. Five active chips including a mixer, driver amplifier, power amplifier, and two frequency multipliers were mounted on the single LTCC package substrate, in which all passive circuits such as a stripline (SL) BPF, 2 × 2 array patch antenna, surface‐mount technology (SMT) pads, and intermediate frequency (IF) feeding lines have been monolithically embedded by using vertical and planar transitions. The embedded SL BPF shows the center frequency of 60.8 GHz, BW of 4.1%, and insertion loss of 3.74 dB. The gain and 3‐dB beam width of the fabricated 2 × 2 array patch antenna are 7 dBi and 36 degrees, respectively. The assembled LTCC 61 GHz Tx SiP module achieves an output power of 10.2 dBm and an up‐conversion gain of 7.3 dB. Because of the integrated BPF, an isolation level between a local oscillation (LO) and RF signal is below 26.4 dBc and the spurious level is suppressed by lower than 22.4 dBc. By using a 61 GHz receiver (Rx) consisting of off‐the‐shelf modules, wireless communication test was demonstrated by comparing measured IF spectrums at the Tx and Rx part.     

DCT statistics-based digital dropout detection in degraded archived media

With the rapid development of visual digital media, the demand for better quality of service has increased the pressure on broadcasters to automate their error detection and restoration activities for preserving their archives. Digital dropout is one of the defects that affect archived visual materials and tends to occur in block by block basis (size of 8 × 8). It is well established that human visual system (HVS) is highly adapted to the statistics of its visual natural environment. Consequently, in this paper, we have formulated digital dropout detection as a classification problem which predicts block label based on statistical features. These statistical features are indicative of perceptual quality relevant to human visual perception, and allow pristine images to be distinguished from distorted ones. Here, the idea is to extract discriminant block statistical features based on discrete cosine transform (DCT) coefficients and determine an optimal neighborhood sampling strategy to enhance the discrimination ability of block representation. Since this spatial frame based approach is free from any motion computation dependency, it works perfectly in the presence of fast moving objects. Experiments are performed on video archives to evaluate the efficacy of the proposed technique.     

Inertial effects on cylindrical particle migration in linear shear flow near a wall

Micro-/nanoparticle-based systems are regarded as one of the possible candidates due to the engineerability and multifunctionality to maximize the accumulation of the nano-/microparticle-based drug delivery system on the target. Recent advances in nanotechnology enable the fabrication of diverse particle shapes from simple spherical particles to more complex shapes. The particle dynamics in blood flow and endocytosis characteristics of non-spherical particles change as the non-sphericity effect increases. We used a numerical approach to investigate the particle dynamics in linear shear flow near a wall. We examined the dynamics of slender cylindrical particles with aspect ratio γ = 5.0 in terms of particle trajectory, velocity, and force variation for different Stokes numbers over time. We identified the rotating inertia of particle near a wall as the source of inertial migration toward the wall. The drift velocity of slender cylindrical particles is comparable to that of discoidal particles. We discuss the possibilities and limitations of using slender cylindrical particles as a drug delivery system.     

Formation stabilization and resizing based on the control of inter‐agent distances

We propose a control strategy that could steer the group of mobile agents in the plane to achieve a specified formation. The control law could be implemented in a fully decentralized manner so that each agent moves on their own local reference frame. Under the acyclic minimally persistent graph topology, each agent measures the relative displacements of neighboring agents and then adjusts the distances between them to achieve the desired formation. As well as achieving a fixed formation, we could resize the formation only by changing the leader edge, which connects the leader with the first‐follower in acyclic minimally persistent graph, without changing the structures of the control law. Copyright © 2014 John Wiley & Sons, Ltd.     

Evaluating the Wisdom of Strangers: The Perceived Credibility of Online Consumer Reviews on Yelp

This study examined the effects of review valence, the reviewer profile, and the receiver's familiarity with the platform (user/nonuser) on the perceived credibility of a review on Yelp.com and on the receiver's attitude toward the reviewed object. The results demonstrated a difference in cue‐taking between users and nonusers. For users, there was an interaction effect of 2 profile cues (number of friends and number of reviews) on competence. Users interpreted the cues in combination, whereas non‐users were not influenced by them. The friends × reviews × platform familiarity interaction indirectly affected attitude through competence. Further, review valence was positively associated with perceived credibility and attitude. The findings support and extend the social information processing theory and cue combination literature.     

An online fault tolerant actor-critic neuro-control for a class of nonlinear systems using neural network HJB approach

In this paper, we propose an actor-critic neuro-control for a class of continuous-time nonlinear systems under nonlinear abrupt faults, which is combined with an adaptive fault diagnosis observer (AFDO). Together with its estimation laws, an AFDO scheme, which estimates the faults in real time, is designed based on Lyapunov analysis. Then, based on the designed AFDO, a fault tolerant actor- critic control scheme is proposed where the critic neural network (NN) is used to approximate the value function and the actor NN updates the fault tolerant policy based on the approximated value function in the critic NN. The weight update laws for critic NN and actor NN are designed using the gradient descent method. By Lyapunov analysis, we prove the uniform ultimately boundedness (UUB) of all the states, their estimation errors, and NN weights of the fault tolerant system under the unpredictable faults. Finally, we verify the effectiveness of the proposed method through numerical simulations.     

Usability Principles for Augmented Reality Applications in a Smartphone Environment

Through the rapid spread of smartphones, users have access to many types of applications similar to those on desktop computer systems. Smartphone applications using augmented reality (AR) technology make use of users' location information. As AR applications will require new evaluation methods, improved usability and user convenience should be developed. The purpose of the current study is to develop usability principles for the development and evaluation of smartphone applications using AR technology. We develop usability principles for smartphone AR applications by analyzing existing research about heuristic evaluation methods, design principles for AR systems, guidelines for handheld mobile device interfaces, and usability principles for the tangible user interface. We conducted a heuristic evaluation for three popularly used smartphone AR applications to identify usability problems. We suggested new design guidelines to solve the identified problems. Then, we developed an improved AR application prototype of an Android-based smartphone, which later was conducted a usability testing to validate the effects of usability principles.