Approximate Product Life Cycle Costing Method for the Conceptual Product Design

Although the product life cycle cost (LCC) is mainly committed by early design stages, designers do not consider the costs caused in subsequent phases of life cycle. The estimating method for the product life cycle cost in early design processes has been required because of both the lack of detailed information and time for a detailed LCC for a various range of design concepts. This paper suggests an approximate LCC method that allows the designer to make comparative LCC estimation between the different product concepts. The product attributes at the conceptual design phase and LCC factors are introduced and the significant product attributes are determined by statistical analysis. Neural network algorithms are applied to estimate LCC by considering the identified product attributes as inputs and the LCC as output. Trained learning algorithms for the known characteristics of existing products will quickly give the estimation of LCC for new product concepts. The estimation for maintenance and energy costs of electronic appliances is shown as an example. The proposed method provides the good estimation for the LCC and gives the guidelines leading to cost-effective design decision-making at the early design stage.     

Analysis of performance for centrifugal steam compressor

In this study, mean streamline and Computational fluid dynamics (CFD) analyses were performed to investigate the performance of a small centrifugal steam compressor using a latent heat recovery technology. The results from both analysis methods showed good agreement. The compression ratio and efficiency of steam were found to be related with those of air by comparing the compression performances of both gases. Thus, the compression performance of steam could be predicted by the compression performance of air using the developed dimensionless parameters.     

Effect of a diffuser on gas-solid behavior in CFB riser for CO2 capture

Gas-solid fluidized beds have been used in CO₂ capture processes because of their high mixing characteristic and heat and mass transfer. Sufficient residence time of solid particles in a reactor is required to capture CO₂. However, a fraction of solid particles pass through a reactor without capturing CO₂ due to normal reaction characteristics. Therefore, the objective of the present study was to increase the sorbent residence time using a diffuser in a reactor for CO₂ capture. An Eulerian-Eulerian model in a commercial CFD program was employed to simulate gas-solid flow in the reactor. First, sensitivity analysis depending on operating conditions was conducted to predict the residence time of solid particles. The diffuser was located in the middle of the reactor and the angle of the diffuser was changed. Solid particles dispersed in the radial direction because of gas characteristics in the diffuser and increased the residence time. The results showed that the diffuser increased the sorbent residence time, so that the probabilities of gas-solid reaction would be also improved.

     

Corrosion and time dependent passivation of Al 5052 in the presence of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Corrosion and time–dependent oxide film growth on AA5052 Aluminum alloy in 0.25M Na₂SO₄ solution containing H₂O₂ was studied using electrochemical impedance spectroscopy, potentiodynamic polarization, chronoamperometric and open circuit potential monitoring. It was found that sequential addition of H₂O₂ provokes passivation of AA5052 which ultimately thickens the oxide film and brings slower corrosion rates for AA5052. H2O2 facilitates kinetics of oxide film growth on AA 5052 at 25° and 60 °C which is indicative of formation of a thick barrier film that leads to an increment in the charge transfer resistance. Pitting incubation time increases by introduction of H₂O₂ accompanied by lower pitting and smoother surface morphologies. At short exposure (up to 8 h) to H₂O₂–containing solution, the inductive response at low frequencies predominantly determined the corrosion mechanism of AA5052. On the other hand, at prolonged exposure times (more than 24 h) to 0.25M Na₂SO₄+1vol% H₂O₂ solution, thicker oxide layers resulted in the mixed inductive–Warburg elements in the spectra.     

Environmental Enrichment Enhances Cav 2.1 Channel-Mediated Presynaptic Plasticity in Hypoxic–Ischemic Encephalopathy

Hypoxic–ischemic encephalopathy (HIE) is a devastating neonatal brain condition caused by lack of oxygen and limited blood flow. Environmental enrichment (EE) is a classic paradigm with a complex stimulation of physical, cognitive, and social components. EE can exert neuroplasticity and neuroprotective effects in immature brains. However, the exact mechanism of EE on the chronic condition of HIE remains unclear. HIE was induced by a permanent ligation of the right carotid artery, followed by an 8% O₂ hypoxic condition for 1 h. At 6 weeks of age, HIE mice were randomly assigned to either standard cages or EE cages. In the behavioral assessments, EE mice showed significantly improved motor performances in rotarod tests, ladder walking tests, and hanging wire tests, compared with HIE control mice. EE mice also significantly enhanced cognitive performances in Y-maze tests. Particularly, EE mice showed a significant increase in Ca_v 2.1 (P/Q type) and presynaptic proteins by molecular assessments, and a significant increase of Ca_v 2.1 in histological assessments of the cerebral cortex and hippocampus. These results indicate that EE can upregulate the expression of the Ca_v 2.1 channel and presynaptic proteins related to the synaptic vesicle cycle and neurotransmitter release, which may be responsible for motor and cognitive improvements in HIE.     

Suppression of TRPV1/TRPM8/P2Y Nociceptors by Withametelin via Downregulating MAPK Signaling in Mouse Model of Vincristine-Induced Neuropathic Pain

Vincristine (VCR) is a widely used chemotherapy drug that induced peripheral painful neuropathy. Yet, it still lacks an ideal therapeutic strategy. The transient receptor potential (TRP) channels, purinergic receptor (P2Y), and mitogen-activated protein kinase (MAPK) signaling play a crucial role in the pathogenesis of neuropathic pain. Withametelin (WMT), a potential Phytosteroid isolated from datura innoxa, exhibits remarkable neuroprotective properties. The present investigation was designed to explore the effect of withametelin on VCR-induced neuropathic pain and its underlying molecular mechanism. Initially, the neuroprotective potential of WMT was confirmed against hydrogen peroxide (H₂O₂)-induced PC12 cells. To develop potential candidates for neuropathic pain treatment, a VCR-induced neuropathic pain model was established. Vincristine (75 μg/kg) was administered intraperitoneally (i.p.) for 10 consecutive days (day 1–10) for the induction of neuropathic pain. Gabapentin (GBP) (60 mg/kg, i.p.) and withametelin (0.1 and 1 mg/kg i.p.) treatments were given after the completion of VCR injection on the 11th day up to 21 days. The results revealed that WMT significantly reduced VCR-induced pain hypersensitivity, including mechanical allodynia, cold allodynia, and thermal hyperalgesia. It reversed the VCR-induced histopathological changes in the brain, spinal cord, and sciatic nerve. It inhibited VCR-induced changes in the biochemical composition of the myelin sheath of the sciatic nerve. It markedly downregulated the expression levels of TRPV1 (transient receptor potential vanilloid 1); TRPM8 (Transient receptor potential melastatin 8); and P2Y nociceptors and MAPKs signaling, including ERK (Extracellular Signal-Regulated Kinase), JNK (c-Jun N-terminal kinase), and p-38 in the spinal cord. It suppressed apoptosis by regulating Bax (Bcl2-associated X-protein), Bcl-2 (B-cell-lymphoma-2), and Caspase-3 expression. It considerably attenuated inflammatory cytokines, oxidative stress, and genotoxicity. This study suggests that WMT treatment suppressed vincristine-induced neuropathic pain by targeting the TRPV1/TRPM8/P2Y nociceptors and MAPK signaling.     

Effects of cooling rate and stabilization annealing on fatigue behavior of β-processed Ti-6Al-4V alloys

The effects of stabilization annealing and cooling rate on high cycle fatigue (HCF) and fatigue crack propagation (FCP) behaviors of β-processed Ti64 alloys were examined. After β-process heating above β transus, two different cooling rates of air cooling (β-annealing) and water quenching (β-quenching) were utilized. Selected specimens were then underwent stabilization annealing. The tensile tests, HCF and FCP tests on conducted on the β-processed Ti64 specimens with and without stabilization annealing. No notable microstructural and mechanical changes with stabilization annealing was observed for the β-annealed Ti64 alloys. However, significant effect of stabilization annealing was found on the FCP behavior of β-quenched Ti64 alloys, which appeared to be related to the built-up of residual stress after quenching. The mechanical behavior of β-processed Ti64 alloys with and with stabilization annealing was discussed based on the micrographic examination, including crack growth path and crack nucleation site, and fractographic analysis.     

Correlation of eddy current responses between fatigue cracks and electrical-discharge-machining notches

The eddy current responses of Electrical Discharge Machining (EDM) notches and fatigue cracks are directly compared to verify the reliability of eddy current inspection. The fatigue crack growth tests using a constant load range control mode were conducted to obtain a variety of edge crack sizes, ranging from 0.9 to 6.6 mm for Al alloy and from 0.1 to 3 mm for Ti alloy. EDM notch specimens of Al and Ti alloys were accordingly prepared in lengths similar to that of the fatigued specimen. The crack length was determined by optical microscope and scanning electron microscope. The eddy current responses between the EDM and fatigued specimens with varying notch/crack length were examined using probe sensors at (100-500) kHz and (1-2) MHz for Al and Ti alloys, respectively. The results show a significant difference in the eddy current signal between the two specimens, based on the correlation between the eddy current response and notch/crack length. This suggests that eddy current inspection using the EDM reference specimen is inaccurate in determining the precise crack size, unless the eddy current response data base is obtained from a fatigue-cracked specimen.