Isotropic carbon and graphite fibers from chemically modified coal-tar pitch

A precursor for a general purpose carbon fiber was prepared from coal tar pitch (CP) modified with 10 % p-benzoquinone (BQ) at 380 ?C for 3 hours. Such a modification raised the softening of the pitch from 85 ?C to 271 ?C at a yield of 43 %. The modified pitch was spun smoothly at a rate of 480 m/min into a fiber of 20 Μm diameter. The fiber was stepwise stabilized at 236 ?C (5 ?C/min) and 312 ?C (1 ?C/min) for 3 hours at each temperature. Successively,carbonization and graphitization were performed at 1,000 ?C and 2,400 ?C, respectively, for one hour. Both the carbonized and graphitized fibers exhibited tensile strength of 570 MPa. The structural parameters of carbon and graphite fibers were their orientation values of 56.2 and 58.1 %, relatively low Lc(002) of 11.24 and 25 å, and large interlayer spacing (d₀₀₂) of 3.86 and 3.49 å, respectively.     

In Situ Measurement of Bridging Stresses in Toughened Silicon Nitride Using Raman Microprobe Spectroscopy

Bridging stresses that result both from elastic tractions and frictional interlocking in the wake of an advancing crack have been evaluated quantitatively via in situ Raman microprobe spectroscopy in a toughened Si₃N₄ polycrystal. Crack opening displacement (COD) profiles of bridged cracks also have been measured quantitatively via scanning electron microscopy to substantiate the piezospectroscopic determination of microscopic stresses via Raman spectroscopy. The highest spatial resolution of the stress measurement in the Raman apparatus was 1 µm, as dictated by the optical lens that was used to focus the laser on the sample. Measurements of the bridging stresses were performed both at fixed sites (as a function of the applied load) and along the profile behind the crack tip (under a constant load). Rather high stress values (i.e., 0.4-1.1 GPa) were measured that corresponded with unbroken ligaments that bridged the crack faces in elastic fashion, whereas frictional sites were typically under a lower tensile stress (0.1-0.5 GPa). Mapping the near-tip COD profile and the bridging stresses at the (normal) critical load for catastrophic fracture enabled us to calculate the crack-tip toughness and to explain the rising R -curve behavior of the material. From a comparison with conventional fracture-mechanics data, a self-consistent view of the mechanics that govern the toughening behavior of the Si₃N₄ polycrystal could be obtained. In particular, crack bridging is proven to be, by far, the most important mechanism that contributes to the toughening of polycrystalline Si₃N₄ materials.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

High Levels of the Cleaved Form of Galectin-9 and Osteopontin in the Plasma Are Associated with Inflammatory Markers That Reflect the Severity of COVID-19 Pneumonia

Numbers of patients with coronavirus disease 2019 (COVID-19) have increased rapidly worldwide. Plasma levels of full-length galectin-9 (FL-Gal9) and osteopontin (FL-OPN) as well as their truncated forms (Tr-Gal9, Ud-OPN, respectively), are representative inflammatory biomarkers. Here, we measured FL-Gal9, FL-OPN, Tr-Gal9, and Ud-OPN in 94 plasma samples obtained from 23 COVID-19-infected patients with mild clinical symptoms (CV), 25 COVID-19 patients associated with pneumonia (CP), and 14 patients with bacterial infection (ID). The four proteins were significantly elevated in the CP group when compared with healthy individuals. ROC analysis between the CV and CP groups showed that C-reactive protein had the highest ability to differentiate, followed by Tr-Gal9 and ferritin. Spearman’s correlation analysis showed that Tr-Gal9 and Ud-OPN but not FL-Gal9 and FL-OPN, had a significant association with laboratory markers for lung function, inflammation, coagulopathy, and kidney function in CP patients. CP patients treated with tocilizumab had reduced levels of FL-Gal9, Tr-Gal9, and Ud-OPN. It was suggested that OPN is cleaved by interleukin-6-dependent proteases. These findings suggest that the cleaved forms of OPN and galectin-9 can be used to monitor the severity of pathological inflammation and the therapeutic effects of tocilizumab in CP patients.     

Recombinant Long-Acting Thioredoxin Ameliorates AKI to CKD Transition via Modulating Renal Oxidative Stress and Inflammation

An effective strategy is highly desirable for preventing acute kidney injury (AKI) to chronic kidney disease (CKD) transition. Thioredoxin-1 (Trx), a redox-active protein that has anti-oxidative and anti-inflammatory properties, would be a candidate for this but its short half-life limits its clinical application. In this study, we examined the renoprotective effect of long-acting Trx that is comprised of human albumin and Trx (HSA-Trx) against AKI to CKD transition. AKI to CKD mice were created by renal ischemia-reperfusion (IR). From day 1 to day 14 after renal IR, the recovery of renal function was accelerated by HSA-Trx administration. On day 14, HSA-Trx reduced renal fibrosis compared with PBS treatment. At the early phase of fibrogenesis (day 7), HSA-Trx treatment suppressed renal oxidative stress, pro-inflammatory cytokine production and macrophage infiltration, thus ameliorating tubular injury and fibrosis. In addition, HSA-Trx treatment inhibited G2/M cell cycle arrest and apoptosis in renal tubular cells. While renal Trx protein levels were decreased after renal IR, the levels were recovered by HSA-Trx treatment. Together, HSA-Trx has potential for use in the treatment of AKI to CKD transition via its effects of modulating oxidative stress and inflammation.     

Characterization of E- and Z-ajoene obtained from different varieties of garlics

Synthesised E- and Z-ajoene were used to determine their amounts in food oils containing various fresh garlics. The best yield of E-ajoene (172.0 μg/g of garlic) and Z-ajoene (476.0 μg/g of garlic) was obtained from freshly prepared Japanese garlic with rice oil which was heated at 80 °C. Determination of E- and Z-ajoene from soybean oil containing 15% Japanese garlic samples prepared at 80 °C for 0.5 h gave the amount of E-ajoene (170.0 μg/g of garlic) and Z-ajoene (127.0 μg/g of garlic). After 9-month storage, 54.0% E- and 11.0% Z-ajoene remained in Japanese garlic with rice oil. Ajoene (0.1 mM) in ethyl acetate was incubated under UV-light (253.7 nm) for 3 days, 81.7% E- and 56.9% Z-ajoene remained. 4.3% and 0.5% E- and Z-ajoene remained when ajoene (0.1 mM in ethyl acetate) was incubated at 100 °C.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.     

Utilization of a Biodegradable Mulch Sheet Produced from Poly(Lactic Acid)/Ecoflex?/Modified Starch in Mandarin Orange Groves

We have developed a mulch sheet made by inflation molding of PLA, Ecoflex^® and modified starch, which all have different biodegradabilities. A field test of use as an agricultural mulch sheet for mandarin oranges was carried out over two years. The mechanical properties of the mulch sheet were weakened with time during the field test, but the quality of the mandarin oranges increased, a result of the controlled degradation of the sheet. The most degradable modified starch degraded first, allowing control of the moisture on the soil. Accelerator mass spectroscopy was used for evaluation of the biomass carbon ratio. The biomass carbon ratio decreased by degradation of the biobased materials, PLA and modified starch in the mulch sheet.     

Synthesis,properties, and solid-state assemblies of β-alkyl-substituted dipyrrolyldiketone BF2 complexes

In this paper, the synthesis and solid-state structures of β-alkyl-substituted dipyrrolyldiketone BF₂ complexes are discussed; these complexes can function as π-conjugated acyclic anion receptors (“molecular flippers”) and are potential building subunits of anion-responsive π-conjugated oligomers or polymers. Modes of the solid-state assemblies in these complexes determined by performing single-crystal X-ray analysis are found to depend on the lengths of the alkyl chains at the β-positions. A β-methyl-substituted receptor has a highly planar structure, which efficiently forms stacking assemblies in the core π-plane in the solid state, while a β-ethyl-substituted receptor shows no stacking assemblies due to the presence of bulky ethyl moieties, which form only dimeric structures by hydrogen bonding. β-Alkyl-substituted anion receptors can be used not only as monomer units of stimuli-responsive polymeric macromolecules but also as components of solid-state electronic materials.     

A straight-bladed vertical axis wind turbine with a directed guide vane row — Effect of guide vane geometry on the performance —

The objective of this study is to show the effect of guide vane geometry on the performance. In order to overcome the disadvantages of vertical axis wind turbine, a straight-bladed vertical axis wind turbine (S-VAWT) with a directed guide vane row has been proposed and tested by the authors. According to previous studies, it was clarified that the performance of the turbine can be improved by means of the directed guide vane row. However, the guide vane geometry of S-VAWT has not been optimized so far. In order to clarify the effect of guide vane geometry, the effects of setting angle and gap between rotor blade and guide vane on power coefficient and starting characteristic were investigated in the experiments. The experimental study of the proposed wind turbine was carried out by a wind tunnel. The wind tunnel with a diameter of 1.8m is open jet type. The wind velocity is 8 m/s in the experiments. The rotor has three straight blades with a profile of NACA0018 and a chord length of 100 mm, a diameter of 0.6 m and a blade height of 0.7 m. The guide vane row consists of 3 arc plates.