High-cycle fatigue characterization of titanium 5Al-2.5Sn alloy

High-cycle fatigue behaviour of titanium 5Al-2.5Sn alloy at room temperature has been studied. S-N curve characterization is performed at different stress ratios ranging from 0 to 0.9 on a subsized fatigue specimen. Both two-stress and three-stress level tests are conducted at different stress ratios to study the cumulative fatigue damage. Life prediction techniques of linear damage rule, double linear damage rule and damage curve approaches are applied, and results are compared with the experimental data. The agreement between prediction and experiment is found to be excellent.     

Generalized percolation theory for the analysis of the structure and properties of porous and composite materials

Expressions are obtained for calculating percolation characteristics of heterogeneous systems with the use of refined auxiliary relations in the entire range of their porosity (concentration of a disperse phase).Institute of Engineering Thermophysics, Academy of Sciences of the Ukraine, Kiev. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 3, pp. 348–352, March, 1994.     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

甲状腺素T4免疫传感器的研究

报道以甲基丙烯酸羟乙酯与甲基丙烯酸甲酯的共聚物为载体膜材料，研制成非酶标记的Ｔ４免疫传感器，并对载体膜材料的共聚方法及共聚物共聚比与传感器灵敏度的关系进行了探讨。     

化学模式识别法在钢铁工业中的若干应用

本文涉及一种崭新的非函数数据处理法及其在工业诊断和优化中的应用。并对其进行要因分析和优化决策的原理作了介绍。结合钢铁工业生产中的实例进行了分析。还探讨了该方法在钢铁工业中应用的意义。     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。     

Measurement of photon beam backscatter from collimators to the beam monitor chamber using target-current-pulse-counting and telescope techniques

Backscattered radiation (BSR) arising from field-defining collimators and entering the beam monitor chamber (BMC) may contribute to observed variations in medical linear accelerator photon beam output with collimator setting. Measuring the magnitude of such contributions for particular accelerators under specified operating conditions is therefore important when attempting to understand and model accelerator head scatter. The present work was conducted to confirm some backscatter measurements for collimating jaws reported previously and to extend these to include other accelerators and a multileaf collimator (MLC). BSR reaching the BMC from the jaws of Clinac 600C, 2100C and 2300CD accelerators and from an MLC on the 2300CD was investigated using both target-current-pulse-counting and telescope methods. Our measurements show that for the Clinac 600C BSR-dependent output variations are negligible. However, for the 2100C and 2300CD BSR-dependent relative output increased in an almost linear fashion, by up to 2.4% for 15 and 18 MV beams, and by up to 1.7% for 6 MV beams, as the field size varied from 5 x 5 cm2 to 40 x 40 cm2. The magnitude of BSR dependent upon collimator location in the head, as expected, thereby contributing to the collimator exchange effect. An earlier study at our centre using the telescope method had reported higher BSR levels. This discrepancy was resolved when corrections for telescope block and room scatter, previously assumed negligible, were made.