预制楼板板缝宽度及平整度的控制方法

针对预应力楼板在施工中存在的质量通病，介绍了对预制楼板板缝宽度及找平的控制方法，有效地防止楼板裂缝的产生，提高室内地面、屋顶粉刷的平整度。     

The impact of preoxidation of SAS on biosorption efficiency on activated carbon

We have studied the process of a prolonged dynamic filtration on activated carbon in two biosorption systems — without preoxidation treatment of the initial matter and after ozonization. It has been shown that given the uniform load on activated carbon terms of the organic matter the efficiency of the biosorption process after preozonization is 2.3 times as small compared with that that without pretreatment, which correlates with the change of adsorption free energy.     

A Support Vector Machine Based on Bayesian Criterion

SVM handles classification problem only considering samples themselves and the classification effect depends on the characteristics of the training samples but not the current information of classified problem.From the phenomena of data crossing in systems,this paper improves the classification effect of SVM by adding the prior probability item reflecting the classified problem information into the decision function,which fuses the Bayesian criterion into SVM.The detailed deducing process and realizing steps of the algorithm are put forward.It is verified through two instances.The results showthat the new algorithm has better effect than the traditional SVM algorithm,and its robustness and sensitivity are all improved.     

一种航空深弹安定器的CFD优化设计

静稳定性是航空深弹稳定飞行的先决条件,某对称配置的航空深弹静稳设计主要通过调整安定器的外形和相对位置实现。利用CFD方法研究某航空深弹在各种安定器外形参数条件下的流体动力参数,优化在总体接口条件限制下最可能实现的安定器外形设计。通过使用Fluent软件计算结果与试验结果的比较,认为此计算结果可信。     

Exif数据格式浅析及其读取应用

照片中镶嵌着丰富的Exif信息,从中可提取出拍摄位置与时间等实用数据服务于我们的工作与生活。本文分析了Exif数据格式,介绍了其读取方法,总结了Exif信息提取算法。结合具体实例,进行测试验证,对日常手机定位精度情况进行了评估。最后,通过生产实践,验证Exif信息对于提高测绘与地理信息单位的作业效率与质量控制的促进作用,同时对应用前景进行了展望。     

基于SVM和能量最小化的PolSAR图像分类方法

极化合成孔径雷达(PolSAR)采用全极化的工作方式可以获取地物的多种特征,利用这些特征对地物进行分类是PolSAR图像的重要应用方向。不同的特征和分类器对分类精度有着较大的影响。提出了一种基于支持向量机(SVM)和能量最小化(EM)的极化SAR图像地物分类方法。该方法选择基于6种散射模型的分解方法(6SD)所得的6部分散射能量、总散射能量span和3个极化相干矩阵旋转域角参数作为SVM的输入,得到图像分类结果,并使用基于图割的能量最小化算法α-expansion对分类结果进行优化。最后使用AIRSAR系统获得的Flevoland地区的数据进行实验,结果表明所提算法可以提高总体分类精度,总体分类精度为95.6%,高于其他方法的92.3%。所提算法可以较大幅度地提高散射机理明显的区域,如建筑、森林、水域、草地等区域的分类精度。另外,结合EM优化结果可以提高所有种类的分类精度,其中在苜蓿、小麦1、小麦2、裸地、草地、油菜籽等区域的分类精度可提高1%以上。     

Structure and electrochemical properties of titanate perovskite with in situ exsolution as a ceramic electrode material

Journal of Electroceramics - In this work, the structure and electrochemical properties of titanate ceramics with in situ Ni exsolution are investigated to identify the structure-performance...     

Analysis of Methods for Parallel Operation of Frequency Converters

Consideration is given to methods for the parallel operation of frequency converters by applying the active load division. The simulation model of the converter is presented. It consists of three parallel independent modules. A new principle of constructing individual modules of a frequency converter and the principle of their communication interface exhibiting resistance to destabilizing effects and allowing safe operation under nominal conditions even with a 5- to 10% range in time and amplitude values of pilot signals are developed.     

金沙江乌东德水电站大坪地滑坡稳定性研究

介绍了大坪地滑坡区的地形地貌与地层岩性,阐述了该滑坡体的变形特征,结合大坪地滑坡的计算模型,分析了库水升降作用对滑坡稳定性的影响,该分析成果将对该库区的滑坡防治提供一定的参考。     

Simulation of one-sided heating of boiler unit membrane-type water walls

This study describes the results of simulation of the temperature field and the stress-strain state of membrane-type gastight water walls of boiler units using the finite element method. The methods of analytical and standard calculation of one-sided heating of fin-tube water walls by a radiative heat flux are analyzed. The methods and software for input data calculation in the finite-element simulation, including thermoelastic moments in welded panels that result from their one-sided heating, are proposed. The method and software modules are used for water wall simulation using ANSYS. The results of simulation of the temperature field, stress field, deformations and displacement of the membrane-type panel for the boiler furnace water wall using the finite-element method, as well as the results of calculation of the panel tube temperature, stresses and deformations using the known methods, are presented. The comparison of the known experimental results on heating and bending by given moments of membrane-type water walls and numerical simulations is performed. It is demonstrated that numerical results agree with high accuracy with the experimental data. The relative temperature difference does not exceed 1%. The relative difference of the experimental fin mutual turning angle caused by one-sided heating by radiative heat flux and the results obtained in the finite element simulation does not exceed 8.5% for nondisplaced fins and 7% for fins with displacement. The same difference for the theoretical results and the simulation using the finite-element method does not exceed 3% and 7.1%, respectively. The proposed method and software modules for simulation of the temperature field and stress-strain state of the water walls are verified and the feasibility of their application in practical design is proven.