Control of Discrete Fuzzy Systems: Uncertainty and Guaranteed Performance

Robust control designs for a discrete Takagi and Sugeno (T-S) fuzzy model are proposed. The T-S fuzzy model contains (possibly fast) time-varying uncertainty. First, a switching-type robust control is shown to stabilize the T-S fuzzy model asymptotically. Second, a saturation-type robust control is shown to render the T-S model practically stable. In both designs, only the bound of uncertainty is needed. The effectiveness of proposed designs is analyzed rigorously and illustrated by simulations.     

湖南有色金属工业发展战略评述

概述了湖南有色金属工业发展的基本现状和所存在的主要问题，分析了其面临的战略形势。指出湖南有色金属工业必须走产业结构总体优化、产业全面升级和大集团层面资本运营发展之路，并详细提出了相应的战略措施。     

钢铁精炼晶粒细化一步法初探

将自我研发从粉煤灰中分离提取微珠为主的新型钢铁用精炼晶粒细化复合材料，加入熔融钢铁液中，辅以惰性气体或机械搅动使之在数分钟内与钢液迅速反应，取样、铸坯、检测．精炼脱碳效果明显，晶粒细化等级提高，一步法实现了钢铁精炼脱碳、晶粒细化．在国内外尚属首次用此材料与方法试验研究．     

β brass bicrystal stress-strain relations

The stress-strain relations of three isoaxial and one nonisoaxial bicrystal whose grain boundaries are parallel to the stress axis have been studied. From one set of isoaxial bicrystals it has been possible, for a given strain, to determine the average stress in the grain boundary deformation zone from the relationship where σ _T is the applied stress, σ _b is the single crystal flow stress for the given strain, andV _gb is the volume fraction of grain boundary deformation zone. was determined from measured values of σ _T , σ _b , andV _gb . From these data and it was possible to extrapolate to the grain boundary to obtain σ _gb , the grain boundary stress. From the nonisoaxial bicrystal series containing a hard and a soft component, it was possible to determine at a given strain the stresses in each component and therefore the stress-strain relations from the relationship where and are the average stress in the hard and soft components respectively, andV _H andV _S are the corresponding volume fractions. The remaining two isoaxial bicrystal series were used to evaluate strengthening effects of bicrystal boundaries. YII-DER CHUANG, formerly Graduate Student, Department of Metallurgy and Materials Sciences, School of Engineering, New York University, Bronx, N. Y. 10453 This paper is based on a thesis submitted by Yii-der Chuang in partial fulfillment of the requirements for the Ph.D. degree in metallurgy at New York University, New York, N. Y.     

强流脉冲电子束轰击作用下的扩散模型及其数值计算

在温度场和应力场计算的基础上建立了强流脉冲电子束轰击作用下的扩散模型,并给出了数值方法及其数值解。该模型与方法同样适用于其它高能束流作用下的扩散过程。计算表明,浓度扩散流仍然是影响扩散的主要因素;而轰击超过一定次数后,扩散的作用将减弱;当边界条件为表面扩散时,扩散进行较快,这是表面涂覆加脉冲电子束后处理快速表面合金化工艺的理论基础。对实验结果和理论结果的对比分析表明,在脉冲轰击下,扩散激活能随空位浓度的增加而下降,从而加速扩散过程;在表面有熔化的情况下,则液态时的对流混合作用是主导因素。     

Development of an objective mental workload assessment tool based on Rasmussen's skill–rule–knowledge framework

It is important to monitor operators’ mental workload during the operation phase. Physiological measurement approaches could record the operator's mental data continuously, and might be less interruptive on the work activities. However, these methods often require the attachment of physical sensors, which are not unobtrusive in the physical sense. Furthermore, the individual difference makes calibrating to each individual tedious and requires trained persons to use. Often high noise-to-signal ratio data are hard to analyze. Due to these factors, physiological workload measurements are hardly widely applied in practical fields. In this study, an objective, non-intrusive and performance-based mental workload predictive model was proposed with high validity (R² = 0.51), which can be applied during the operation phrase. This model, developed based on the Rasmussen's skill–rule–knowledge framework, is comprised of two novel cognitive indices, the attention required index and uncertainty index. It can be used as the basis for establishing an early online warning system automatically. Furthermore, this model also predicts the types of error-prone tasks. This kind of information is expected to provide managers and supervisors with opportunities to intervene and improve tasks before error occurred. Finally, the predictive model proposed in this paper requires more practical application in fields to be completed.     

基于瞬态动力分析的装配式板桥铰缝损伤识别

根据铰缝在装配式板桥传递荷载的作用,通过数值计算方法模拟了装配式板桥在铰缝损伤后的瞬态动力学响应,比较分析了不同损伤程度、不同动荷载加载位置下各板跨中加速度幅值,提出利用多次冲击实验下各板加速度幅值比之差值作为铰缝损伤的评定依据的识别方法,并分析了这种方法的可行性.     

双相不锈钢中厚板在线酸洗工艺研究进展

在卧式连续喷淋酸洗机组上,利用原设备和H2SO4+(HNO_3+HF)酸洗液技术酸洗双相不锈钢中厚板,酸洗后表面出现浅灰色、下表面辊印缺陷。针对这些缺陷,以S32205双相不锈钢板为代表牌号,论述一种两段式混酸(HNO_3+HF)液酸洗方法,开展了两段式混酸(HNO_3+HF)液酸洗方法的实验室、工业化工艺试验和研究,并对原卧式喷淋酸洗生产线进行了技术改造。应用两段式混酸(HNO_3+HF)液工艺技术酸洗S32205钢板,在预先酸洗工艺段,混酸液HNO_3质量浓度为180g/L、HF质量浓度为90g/L,混酸液温度为43℃;在最终酸洗工艺段,混酸液HNO_3质量浓度为265g/L、HF质量浓度为56g/L,混酸液温度为43℃,一次酸洗合格率达到95%以上。从技术上解决了双相不锈钢中厚板酸洗后表面出现的浅灰色、下表面辊印缺陷,酸洗后的钢板表面呈银白色,色泽均匀,满足了双相不锈钢板产品标准关于表面质量的要求。     

板坯电渣重熔炉结晶器报废原因分析及改进措施

着重对舞钢公司40 t板坯电渣重熔炉结晶器的报废原因进行了分析研究,阐述了针对该类型结晶器所制定的维护、修复与报废标准,同时提出了延长结晶器使用寿命和降低结晶器使用成本方面的一些措施和设想展望。