智能手机点击劫持攻击检测方法研究

点击劫持通过欺骗用户点击经过伪装的界面元素达到攻击目的。移动互联网环境下,智能手机的屏幕特征、手势识别、HTML5支持度高等特性成为点击劫持新的利用点。深入分析并实验验证智能手机脆弱特性,在此基础上提出点击劫持在智能手机上的潜在攻击方案。进而设计并实现一套有针对性的检测方案。该方案从静态页面和动态行为两个角度提取攻击特征,并进行基于规则的量化评估与组合判定。实验结果表明该方案可以有效地降低传统页面特征检测方案的漏报和误报情况。     

合同网协议协商机制收敛性与收敛速率分析

针对合同网协议协商机制缺乏问题求解质量与效率分析的情况,设定假设条件,构建马尔可夫链模型,得出了利用目前已有的合同类型无法保证全局收敛的结论.在此基础上,提出了变邻域合同系的概念,通过分析控制方式对收敛性的影响,得出了集中式控制可以保证全局收敛以及分布式控制以概率保证全局收敛的结论,并设计了概率的计算方法.采用Doebin理论,对应用变邻域合同系的收敛速率进行分析,得出了集中式控制收敛速率与分布式控制收敛速率的上下界估计.     

Enhanced corrosion prevention effect of polysulfone–clay nanocomposite materials prepared by solution dispersion

A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004     

粒子弥散强化氮化硅基陶瓷

运用晶界工程理论，选择能形成高耐炎度晶界相的Ｙ２Ｏ３和Ｌａ２Ｏ３双稀土氧化物为Ｓｉ３Ｎ４陶瓷烧结助剂，材料具有优异的高温强度。第二相碳化硅粒子的引入有效地改善了氮化陶瓷的显微结构和力学性能。以无压烧结工艺制备的高性能α／β－Ｓｉａｌｏｎ复相陶瘊等在实际应用中获得良好效果。     

基于混沌蚁群算法的应急救援车辆调度优化

针对应急救援车辆调度优化问题的特征和需求,以可变双向距离、道路风险和成本最小为主要目标,建立了应急救援车辆调度优化问题的多目标优化模型.为避免过早陷入局部最优,提出了基于混沌扰动的改进蚁群系统优化算法.该算法可对信息素进行全局更新混沌扰动,有效地提高了算法的适应性、求解效率和求解质量.仿真实验表明该算法是可行的,能较好地满足应急救援车辆调度的优化需求.     

微波在化工过程中的研究及应用进展

与传统加热过程比较，微波辅助有机合成的优势在于加快反应速率、提高产率和改变化学选择性。研究者们将这种常规加热无法重现的现象称为非热效应，但关于非热效应的存在性一直争论不休，至今微波促进合成反应的作用机理尚不清楚。总结了微波技术在有机合成和化工分离过程的应用进展，综述了近年来国内外对微波热效应与非热效应的研究进展，阐述了微波效应的实例分析以及理论观点，同时，对微波在工业化过程的发展进行了分析与展望。     

一种高效的多模式字符串匹配算法

在Fan-Su(FS)多模式字符串匹配算法基础上,结合BM-Horspool(BMH)算法和Quick Search(QS)算法的优点,提出一种高效的多模式字符串匹配算法。该算法能够充分利用本次匹配失败和部分匹配成功的信息,一方面增加模式树根节点失配的概率,提高匹配过程中失配时的跳跃距离。另一方面避免不必要的状态转移,实现不匹配时的连续跳转。分析指出,在最好情况和平均情况下,时间复杂度均优于ACBM算法和FS算法。实验结果表明,一般情况下该算法的查找时间仅为AC算法的10%~35%,ACBM算法的50%~60%,FS算法的70%左右,FSQB算法的65%左右。     

面向个性化云服务的动态信任模型

为更好地实践云计算为用户提供廉价按需服务的宗旨,满足服务请求者的个性化需求,提出一种面向个性化云服务的动态信任模型。基于细粒度服务思想定义个性化云服务,通过引入时间衰减因子和建立高效激励机制修正直接信任值,以灰色系统理论为基础计算实体间的评价相似度,并将评价相似度和推荐者的推荐可信度作为合成推荐信任值的重要因素,同时提出一种基于评价相似度的自信因子赋值方法,以提高合成综合信任值的准确性。实验结果表明,与GM-Trust模型及CCIDTM模型相比,该模型的交互成功率分别平均提高了4%和11%。     

一种共聚物的合成工艺及阻垢性能研究

以水为溶剂,次亚磷酸钠-过硫酸钠为引发剂,以丙烯酸(AA)和2-丙烯酰氨基．2-甲基丙磺酸(AMPS)为单体合成集膦酸基、羧酸基和磺酸基于一体的共聚物制备工艺和阻垢药效进行了研究。经对反应物浓度、反应条件等各因素进行正交设计和反复实验。结果表明,当摩尔配比为AA∶AMPS∶NaH_2PO_2∶Na_2S_2O_8=80∶10∶3∶1,反应温度为70℃,滴加时间为2h,继续保温反应时间为0．5h时,所制备的共聚物阻垢分散性能显著增加,尤以阻Ca_3(PO_4)_2垢的效果明显提高。     

Simultaneous measurement of gas and solid holdups in multiphase systems using ultrasonic technique

Ultrasonic technique has been recently developed to measure dispersed phase holdups in multiphase flows. The experimental results obtained in this work have shown that the fluctuations of the sound speed and attenuation of ultrasound are well-defined functions with solid and gas holdups in liquid-solid and gas-liquid two-phase flows. When both solid particles and gas bubbles are present in a liquid flow, gas bubbles appear to be a dominant factor for the instability of ultrasound signals. These findings lead to a new approach for simultaneous detection of gas and solid holdups in a gas-liquid-solid three-phase flow. In this work, canonical analysis and optimization methods are successfully applied to differentiate the contributions of gas bubbles and solid particles to the ultrasonic signals recorded from three-phase systems. The gas and solid holdups determined by the proposed approach are in a good agreement with the experimental results obtained using differential pressure transducers and conductivity probes.