Enzyme assisted extraction of luteolin and apigenin from pigeonpea [Cajanuscajan (L.) Millsp.] leaves

Luteolin and apigenin are naturally occurring flavones with a wide spectrum of pharmacological properties. In the present study, enzyme assisted extraction of luteolin and apigenin from pigeonpea leaves using commercial plant cell wall degrading enzyme preparations including cellulase, beta-glucosidase and pectinase were examined. We found that pectinase offered a better performance in enhancement of the extraction yields of luteolin and apigenin than cellulase and beta-glucosidase. The pectinase assisted extraction process was further optimized by varying different parameters such as pectinase concentration, time of incubation, pH of pectinase solution, and incubation temperature. The optimum parameters were obtained as follows: 0.4 mg/ml pectinase, incubation for 18 h at 30–35 °C, pH of pectinase solution 3.5–4. Under the optimum conditions, the extraction yields of luteolin and apigenin achieved 0.268 and 0.132 mg/g in pectinase treated sample, which increased 248% and 239%, respectively, compared with the untreated ones.     

Effect of superfine grinding on physicochemical and antioxidant properties of pomegranate peel

Pomegranate peel powders were prepared by superfine grinding, whose effects were investigated on the composition, functional and antioxidant properties of the pomegranate peel products. Fluidised bed jet milling technology was used to process superfine pomegranate peel powder. The physical–chemical properties of coarse powder A (D50 = 413.4 μm) and B (D50 = 197.1 μm), fine powder C (D50 = 142.6 μm) and D (D50 = 41.2 μm), superfine powder E (D50 = 7.68 μm) and raw material powder (RMP) (D50 = 352.2 μm) were investigated in this study. SEM images revealed the shape and surface morphology of six pomegranate peel powders. The physical determinations showed that the smaller the powder particle size was, the greater the surface area (from 0.214 to 1.597 m² g^?1) and bulk density (from 0.653 to 0.751 g mL^?1) were, the smaller the angles of repose (from 51.69° to 38.74°) and slide (from 48.32° to 34.18°) were. The water holding capacity (WHC), water‐solubility index (WSI), polyphenols and flavonoids release were significantly improved as the size of pomegranate peel particle decreased. The results of FTIR and UV indicated that grinding process would not influence chemical composition of pomegranate peel. Vitamin C (VC) and butylated hydroxytoluene (BHT) were used in DPPH scavenging activity determination, and DPPH scavenging activity was A < RMP < BHT < B < C < D < E < VC.     

采用同时蒸馏提取法分析不同加工时期金华火腿香味成分

腌制时间对金华火腿的风味与质量十分重要 ,文中采用同时蒸馏提取法比较了成熟火腿(发酵 1a)和生火腿 (未经发酵 )中的风味成分 ,分别得到了 77种和 62种化合物。结果显示 ,成熟火腿中的醛醇类物质 (3 4种 )尤其是烯醛和烯醇的种类和数量明显多于生火腿 (1 5种 )。同时 ,文中还讨论分析了各类组分及它们的风味贡献。     

Biochemical,microbiological and sensory changes in shrimp (Panaeus aztecus) dipped in different solutions using face‐centred central composite design

Biochemical, microbiological and sensory changes during shelf‐life at ?1 °C were determined in shrimp (Panaeus aztecus) previously dipped in ascorbic acid, citric acid, potassium sorbate and 4‐hexyl resorcinol solutions using face‐centred central composite design. Microbiological count, trimethylamine and hypoxantine production were measured. The lowest level of the total psychrotrophic bacteria, hypoxantine and trimethylamine were found in samples dipped in all containing chemicals solutions comparing to control treatment. Sensory studies showed that treatment A (ascorbic acid 4.50, citric acid 0.12, potassium sorbate 18.60 and 4‐hexyl resorcinol 0.25, all g L^?1) and B (ascorbic acid 4.37, citric acid 1.26, potassium sorbate 7.03 and 4‐hexyl resorcinol 0.25, all g L^?1) did not alter the typical sensory features of shrimp and were effective at delaying the bitter off‐flavour formation for 26 days. This study constitutes a promising alternative to extent shelf‐life of shrimp kept at ?1 °C without freezing.     

印刷机滚筒滑动轴承的可靠性设计

提出和建立了印刷机滚筒滑动轴承可靠性设计的数学模型,并以国产J2108型胶印机滚筒的滑动轴承为例进行抗磨损可靠度计算,找出可靠度随工作时间变化的规律,提出了改进材质以提高轴承寿命的方法,对印刷机制造和使用具有实际指导意义。     

正态分布下转轴强度的可靠性设计

针对转轴设计目前存在的问题,提出了转轴在静强度和疲劳强度两种失效模式下的可靠度计算方法,并采用复合应力法建立了转轴疲劳强度可靠性设计的数学模型,该模型运算简便易于应用。     

超声辅助同时提取迷迭香鼠尾草酸和迷迭香酸

以迷迭香干叶为原料,采用超声辅助的方法从迷迭香中提取迷迭香酸、鼠尾草酸等有效成分,考察了超声提取时间、乙醇体积分数、料液比和超声功率等因素对提取工艺的影响,并通过响应面法进行工艺优化,得到了提取过程优化的工艺条件:乙醇体积分数72.29%、料液比1∶10.05、超声时间51.27 min、超声功率200.55W。拟合得到的模型较好的符合实际。     

无氢类金刚石薄膜的过滤式阴极电弧沉积

研制了一套过滤式阴极电弧沉积设备 ,并利用该设备成功地获得了类金刚石薄膜。扫描电镜分析表明 :获得的薄膜在硅基片上是光滑和致密的。喇曼光谱研究表明 ,这种薄膜是典型的无氢类金刚石薄膜。膜层的摩擦试验表明 :无氢类金刚石薄膜的摩擦系数较低 ,是一种理想的耐磨材料     

开放式数控系统的动态建模研究

针对 CNC系统的复杂性和实时性特点 ,研究了基于开放结构数控平台的功能对象在系统运行中的生命过程以及它们之间相互操作的关系。阐述了在开发开放结构数控系统时 ,用行为模型解决这一动态过程建模的方法。