钨铜合金药型罩及其性能

钨铜合金药型罩的应用可以提高射流对均质钢靶的侵彻能力.这一提高得益于射流密度的提高以及断裂时间的延长. 本文对钨铜合金射流及其断裂形态通过X光照像进行了研究.它的旋转效应及其炸高特性也进行了实验研究. 钨铜合金药型罩的威力实验在φ30 mm的破甲弹上进行.在相同装药条件下与紫铜罩相比,威力提高20～30%.     

添加高效粘结剂的氧化锰矿粉冷固成团

以氧化锰矿粉为原料，添加ＺＢ粘结剂进行冷固成团，所得冷固团块不仅具有足够的机械强度，而且具有良好的耐湿性，适用于长距离运输和露天堆存，是一种可与块矿性能相媲美的优质炉料，为充分利用矿山及冶炼厂的锰矿粉找到了一条良好的途径．     

分层阅读提高学生的语文水平

通过课外阅读来迅速有效地提高学生语文素养和阅读鉴赏水平,成为当前语文教师在语文教学中的共识.但是针对学生的阅读现状、学生个性、心理习惯、阅读兴趣及阅读的基础水平的不同情况,来安排分层次的阅读教学却不多,往往形成了阅读以"一刀切"的方式进行,这就造成了阅读的浪费,费时又费力,还费钱财.要真正培养学生的阅读兴趣,提高语文素养,就必须在课外阅读中有目的地针对不同情况的学生进行不同层次的安排,这就是"分层次阅读".     

The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

地图中铁路、道路提取和恢复显示的方法

本文提出一种从军用地图中提取铁路、道路的半自动方法和自动恢复显示其在地图中标识方式的算法,从而进一步实现地图图形显示系统的多层次结构。     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

Access-mode predictions for low-power cache design

An access-mode prediction technique based on cache hit and miss speculation for cache design-achieves minimal energy consumption. Using this method, cache accesses can be adaptively switched between the way-prediction and the phased accessing modes.     

A hybrid PC/PLC architecture for manufacturing-system control—theory and implementation

This paper presents a novel and generic PC/PLC-based software/hardware architecture for the control of flexible manufacturing workcells. The proposed implementation methodology is based on the utilization of any one of the available formal discrete-event-system control theories in conjunction with state-of-the-art industrial programmable-logic controllers (PLCs). The methodology has been illustrated to be a viable technique through its actual implementation in our laboratory using a robotic-workcell testbed. The specific control theory used is a combination of Extended Moore Automata and Ramadge-Wonham Automata that has been developed by our research group. The modular control software architecture has been developed for MS-Windows environments (running on one PC interfaced to the PLCs) and allows the use of different formal control theories as well as different commercial PLC hardware. The effective graphical user interface provides a transparent programming environment, where users are not expected to have a full knowledge of the formal control theory used.     

最大熵在感应测井反演中的应用

常规的反演方法是对感应测井资料进行线性反褶积。由于感应测并获得的响应曲线是地层非线性时变滤波的结果,感应测井响应随地层电导率发生非线性变化。本文把熵的概念引入到感应测井反演中。用最大熵方法分别设计出实部信号和虚部信号所对应的反滤波因子,两条反映测井响应随电导率非线性变化的非线性函数也被拟合出来。文章最后用设计出的滤波因子及被拟合出的非线性函数对模拟相量感应测井资料进行了相量反褶积。处理结果表明,围岩效应和趋肤效应基本被消除。本方法与常规的三点反褶积法相比,克服了过聚焦现象,提高了精度。     

卫星遥感测控的系统融合技术

卫星遥感测控系统包括运载火箭飞行测控，卫星运行测控，有效载荷设备测控以及它本身应完成的遥感测量，高效完备的系统融合技术采用包括视频综合技术，统一载波宽带传输技术，地面站多功能统一测控技术，软件化技术，载波综合利用技术等，大大简化了卫星遥感的测控设备。