Characteristics of transients among periodic attractors controlledby high-frequency injection in a chaotic laser diode

We numerically studied statistics of the transient response time when switching between periodic attractors obtained through chaos control with a high-frequency injection method in a laser diode that is subject to optical feedback. Each transient response time significantly depends on its position in the starting attractor, whereas the statistical distributions of the response times for many transients are determined almost entirely by the final attractor. The average transient response time is 40 times larger than the round time in the controlled periodic attractors. The transient response time is also strongly affected by the external cavity length. The shortest average transient response time is obtained at a minimum external cavity length and a zero phase difference between the laser field and the feedback light field     

Design of a Quasi-Optical System Converting the TE06 Output Mode of a Gyrotron into a Gaussian-Like Beam

Gaussian optics can be used to design a quasi-optical system converting the TE₀₆ mode output (f=388 GHz) of a submillimeter wave gyrotron into a well-collimated, linearly-polarized free-space beam with a circular cross-section. A quasi-optical antenna produces a main beam with an elliptical cross-section, which is then converted by two mirrors into a well-collimated beam with a circular cross-section.     

Polarization-, Wavelength-, and Filter-Free All-Optical Clock Recovery in a Passively Mode-Locked Laser Diode With Orthogonally Pumped Polarization-Diversity Configuration

We proposed and demonstrated all-optical clock recovery system using a monolithic mode-locked laser diode (MLLD) that operated with less sensitivity to the polarization and the wavelength of the input data signals also with no bandpass filter to eliminate the input signal-components. The keys to this new technique are the MLLD integrated with a tensile-strained quantum-well saturable absorber and a new polarization-diversity setup by signal input orthogonally polarized to the lasing polarization of the MLLD. This approach was experimentally validated in the 40 Gbps clock recovery experiments. The results exhibited excellent performance of the clock recovery with low timing jitters (<0.3 ps) remaining small dependence on the wavelength and the polarization of the input data signals and input-signal suppression less than -30 dB with no use of the bandpass filter. We also succeeded in the stable clock recovery for the input of polarization-scrambled data signals.     

Computer Simulation of Axis-Encircling Beams Generated by an Electron Gun with a Permanent Magnet System

Results from computer aided design of a novel electron gun generating axis-encircling beams are presented and discussed. Numerical experiments were performed by the new version of the software package GUN-MIG named GUN-MIG/CUSP. It is based on a self-consistent relativistic model and is developed as a problem oriented tool for analysis of electron-optical systems with magnetron injection guns (MIG) and electron guns with field reversal (cusp guns), forming axis-encircling beams. As a result of the simulations an electron-optical design of a novel electron gun with permanent magnet system was accomplished. The gun is expected to form high quality beams with small velocity spread and beam ripple. Parameters of the generated beams are appropriate for a prospective weakly relativistic high harmonic large orbit gyrotron (LOG). The development of such device is in progress now at the Research Center for Development of Far-Infrared Region (FIR Center) at Fukui University.     

Application of the Gyrotron FU II Submillimeter Wave Radiation Source to Plasma Scattering Measurements

Gyrotron FU II has been successfully applied as a submillimeter wave radiation source to plasma scattering measurements on the Compact Helical System (CHS) in National Institute for Fusion Science (NIFS) in Japan. The gyrotron operates in a long pulse mode (the pulse width is about 600 ms) at a frequency of about 350 GHz (the corresponding wavelength is 0.85 mm). The output power is about 110 W. The output power is transmitted along a circular waveguide system and converted to a Gaussian-like beam by a quasi-optical antenna. After that, the beam is directed onto the CHS plasma and the scattered signal is detected by a homodyne detection system. The frequency and the wave number of the scattered signal are analyzed. The results suggest that a broad band low frequency (several tens to several hundreds kHz) density fluctuation is excited in the CHS plasma only during neutral beam injection (NBI) or ion cyclotron resonance (ICR) heating.     

Synchronous mode-locking in passively mode-locked semiconductor laser diodes using optical short pulses repeated at subharmonics of the cavity round-trip frequency

Synchronous mode-locking was achieved in passively mode-locked semiconductor lasers using optical pulses with repetition rates at subharmonics of the cavity round-trip frequency. Stable and continuous mode-locked pulses at 8.5 GHz were generated when the repetition rate of the control optical pulses was 4.25 GHz (2nd subharmonic). The timing jitter of the mode-locked pulses was reduced to 1 ps. The relationship between repetition rates of the control pulses and the realization of stable and continuous mode-locking was examined.     

A modified power control scheme for remedying the effects of traffic nonuniformity in LEO satellite communications systems

It has been shown in our previous studies that the geographical traffic nonuniformity considerably affects the performance of the low earth orbit satellite communications systems. In this paper, a new scheme for improving the throughput characteristics of these systems at nonuniform traffic distribution is proposed. In this method, some parts of the users under the satellite which is flying over the area with high traffic load are assigned to its neighbor satellites with lower transmitting power levels. It is shown that the method equalizes the traffic loads of the satellites to some degree and, hence, can improve the throughput characteristics of the system.     

Generation of synchronized subterahertz optical pulse trains byrepetition-frequency multiplication of a subharmonic synchronousmode-locked semiconductor laser diode using fiber dispersion

We describe the generation of a synchronized, low-jitter, subterahertz optical pulse train by repetition-frequency multiplication of a subharmonic synchronous mode-locked semiconductor laser diode using the group-velocity dispersion (GVD) of optical fiber. A 49-196 GHz optical pulse train was generated with low intensity fluctuation and with low timing jitter, by adjusting fiber length in accordance with the mode-locking frequency and the fiber's GVD     

Novel design scheme for high-speed MQW lasers with enhanceddifferential gain and reduced carrier transport effect

We present a theoretical analysis exploring the optimum design of high-speed multiple-quantum-well (MQW) lasers for 1.55-μm operation. Various combinations of well and barrier materials are examined for lattice-matched, strained-layered (SL), and strain-compensated (SC) MQW lasers with InGaAsP and InGaAlAs barriers. The gain characteristics are investigated for these MQW lasers with various barrier bandgap wavelengths and are used to evaluate the modulation characteristics based on the carrier dynamics model which includes a set of Poisson, continuity, and rate equations. The importance of band engineering aimed at simultaneously reducing the carrier transport effect and enhancing the differential gain is described. It is shown that SC-MQW lasers with InGaAlAs barriers have an advantage in reducing the density of states in the valence band by reducing the overlap integral between the heavy- and light-hole wave functions, which effect has previously been discarded as a minor correction in designing conventional InGaAsP-based MQW lasers. Furthermore, the hole transport rate across the barriers can be drastically reduced in SC-MQW lasers due to the reduced effective barrier height for the holes. Based on this novel design scheme, a 3-dB bandwidth approaching 70 GHz is expected for 20-well SC-MQW lasers with InGaAlAs barriers as a result of both the large differential gain and reduced transport effect