基础下早期人防工程处理的实践与探索

地下早期人防工程的处理是当前城市建设中经常遇到的问题。鲁南商城工程地上六层 ,地下一层 ,场区地下有一组早期人防工程 ,距地面 7 0m ,距拟建工程基底不足 2 0m ,影响了工程建设。设计人员通过对早期人防工程的加固处理 ,并在拟建工程设计中运用补偿基础理论 ,消除了地下早期人防工程的不良影响 ,使工程建设顺利进行。该工程实例对同类问题的解决具有实际意义。     

Network model approach for calculating oscillating frequency of thermoacoustic prime mover

The network model is given and used to calculate the oscillating frequency of thermoacoustic prime mover. Theoretically calculated frequency by the model is plural, whose real part denotes actual frequency of the system, and imaginary part means attenuation coefficient of acoustic pressure. Numerical calculation is made under different conditions including different acoustic cavities, spacing between each parallel plate, gas pressures and system lengths. Theoretically calculated frequency and experimentally measured frequency are in quite good agreement.     

发电机同轴励磁机电刷火花过大的原因及处理方法

本文对发电机同轴励磁机电刷火花过大的原因进行了分析．并针对这些原因提出了相应的处理办法。对规范励磁机的运行维护有很大的帮助。     

三体磨料塑变磨损中磨粒运动方式的研究

对三体磨料磨损中磨粒的运动方式做了进一步的理论分析，基于三体磨料磨损中塑变疲劳磨损起主要作用，为突出塑变疲劳磨损的作用，选择圆形磨料进行研究，分析了圆整磨料在三体磨料磨损界面中滚动、滑动的判定，提出了相对滑动界面的判定。     

辽宁省节水型社会建设的发展与思考

辽宁省人均水资源占有量远低于全国和世界平均水平,是水资源严重缺乏的省份。为了保证经济社会发展的用水需求,辽宁省在开发水资源的同时,逐步加大了节水力度,相继建立了各级节水机构,开展节水宣传,逐渐提高人们的节水意识,制定实施了计量收费、计划管理、超计划加价收费等节水政策措施,初步实现了用水定额管理,启动了节水型社会建设试点。     

N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠的合成及性能研究

用 N,N′-二羟乙基乙二胺、氯乙酸钠合成了 N,N′-二羟乙基乙二胺二乙酸钠(中间体),中间体再与硬脂酰氯反应制备了一种新型 Gemini 两性表面活性剂 N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠。对产物合成条件进行了考察,优化的反应条件为:n(硬脂酰氯):n(中间体)=2.5,溶剂 V(水):V(氯仿)=1:2,pH=9.0～10.0,反应温度15～20℃,反应时间5 h。通过红外光谱和质谱分析确定了产物结构,并测试了产物的表面性能。结果表明,在25℃时,该产物的临界胶束浓度为0.24 mmol/L,临界胶束浓度下的表面张力为35.7 mN/m;即时泡沫高度为250 mm,5 min 后泡沫高度为220 mm;乳化时间为22.48 min(甲苯-水物系)和4.65 min(正己烷-水物系),亲水-亲油平衡值为5.4,等电点为 pH 3.3～6.5。     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

Equivalent Control of Constrained Multibody Systems

This paper investigates the title problem from the perspective ofdetermining which forcesystems, although different, will have the same dynamic effectwhen applied to a mechanical system.A procedure is presented for determining how differences incontrol force/moment input are nullifiedby constraints on the system. This in turn provides a basis foroptimal control. The theoreticaldevelopment is illustrated by a series of examples with a model ofa redundant manipulator – a constrained/controlled triple pendulum.     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008