Grain size effects on the mechanical properties of some squeeze cast light alloys

Mechanical property-grain size relationships have been examined for squeeze cast Al-4.5% Cu alloy, for an aluminium alloy with a composition corresponding to wrought 7010, and for a magnesium alloy AZ91. The general trend of the results obtained showed that the tensile properties and the fatigue strength improved as grain size decreased and the reverse was found to be the case for the fatigue crack propagation resistance and fracture energy of these castings. However, the results also showed that no simple common relationship existed between grain size and the tensile properties of the different alloys. The results are discussed in respect of their microstructures.     

多冗余点到点链路下OSPF扩散算法的一种改进方案

文章讨论了OSPF路由协议的扩散算法在多冗余点到点链路情况下存在的缺陷,提出了一种基于扩散接口选举的改进方案。     

超微粒乳剂的制备及量子尺寸效应的研究

本文制备了四种不同粒度的超微粒AgBr照相乳剂,用X射线衍射技术对其粒子的大小进行了测定;观察到乳剂的紫外吸收峰随晶体颗粒的减小表现出逐渐蓝移;本文提出晶体表面的悬键的存在使得纳米晶体的平均键能升高,并对纳米AgBr乳剂的量子尺寸效应进行了解释。     

多层多跨铰接框架计算

本文采用柔度矩阵法,对多层多跨铰接框架进行静力与动力分析,附有实例。与刚度法相比,其优点是使矩阵降价,方法实用,可应用于工业厂房和一般刚架设计中。     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

PTS瞬态流动与换热数值模拟研究

为了研究压水堆因“直接安注”冷水注入压力容器下降环腔而导致的承压热冲击（PTS）热工水力问题,基于1:10比例模型,应用计算流体力学软件FLUENT5.4进行了紊流流动换热的数值模拟分析,同时进行了常压瞬态传热实验研究。针对下降环腔折算流速0.5 m/s,安注流速10m/s的典型工况,研究了安注水开启后下降环腔内的瞬态流动换热特性,数值模拟与实验结果吻合良好。考察了压力容器安注接管出口区环形焊缝区及堆芯段筒体中子强辐照区所承受的热冲击状况,基于稳态流动研究了下降环腔内流体混合特性及流动机理,为热冲击分析提供参考。     

如何调动加油站站长的工作积极性

根据加油站效益的增长关系到成品油销售企业生存与发展的重要地位，以及加油站站长职能逐步由管理向经营、经理人转变的实际情况，指出做好加油站的经营管理工作，最大限度地调动加油站站长的工作积极性是企业必须认真研究解决的问题。阐述了调动站长积极性应做好如下工作：建立优胜劣汰的站长选聘机制；赋予站长应有的管理权力；站长实行“特岗特薪”，体现站长责、权、利的统一；制定公平、客观的业绩考核激励机制；强化站长培训，提高站长的综合素质和专业技术水平。     

论高校的创新性学习

创新性学习是针对传统教育忽视大学生的创新意识和创新能力，知识经济对创新人才的呼唤而提出来的。本文阐述了创新性学习的特点，分析了大学生进行创新性学习应具备的四个条件，并就高校开展创造性学习应注意的四个方面提出了看法。     

富氧氮氧化硅薄膜退火的研究

利用红外吸收(IR)谱和X射线光电子谱(XPS)对富氧氮氧化硅(oxygen-rich SiOxNy)及其在600、750和900℃下退火后样品的微结构进行了研究.实验中除观察到N、H的释放外,首次发现退火会导致SiOxNy中O的释放,同时还发现退火温度不同,H、O、N元素的释放量以及微结构的变化都不相同,根据这些现象,提出了5个化学反应过程并予以解释.