多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

关于加强财务管理,提高经济效益的思考

随着我国经济改革的不断深入,我局的经济工作也从单一的地质勘查向经济多元化方面发展,并且取得了可喜的成果,仅去年我局的多经产值就上亿元,经济规模比上世纪末又上了一个台阶.但我们同时又看到,经济规模虽已扩大,而效益却不尽如人意,虽有利润但微乎其微,有些甚至出现负数.是什么原因使之我们的经济状况总是停留在维持简单再生产上呢？其中原因虽有客观上的,比如：承揽的工程项目单价太低,业务量不饱满,安置人员任务较重等等.但主观原因我认为我们的成本管理还是不到位,“跑、冒、滴、漏”现象严重,这就给我们的财务管理提出了一个严竣的问题,财务应如何管理才能为经济效益的提高发挥其作用呢？我想就这个问题谈谈自己的一些看法和想法.     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

取代二苯多烯和取代聚二乙炔的三阶非线性光学性质

为了设计新的具有较高非线性极化率和光损耗小的有机非线性光学（ＮＬＯ）材料，需要了解不同的有机结构对分子非线性的影响。在此基础之上，建议用平行对比的方法来近似估算取代二苯多烯和聚二乙炔（ＰＤＡ）的三阶非线性光学极化率。     

Structural evolution of matrix phase for liquid phase sintered 93W-4.9Ni-2.1Fe

The structure of the matrix of a two phase heavy alloy, 93W-4.9Ni-2.1Fe (wt%), was characterized. The matrix phase was not the expected face centred cubic Ni-Fe-W solid solution with a large grain size reported in the literature. Instead, an amorphous phase containing fine grained crystals as well as intermetallic compounds having different compositions were found. The partition of tungsten from the matrix toward the tungsten phase resulted in formation of different phases in the matrix. Under furnace cooling, the matrix phase was composed of an amorphous phase for the matrix phase remote from the tungsten grain-matrix interfaces, and a strained FeNi intermetallic phase near the interfaces. For specimens solution treated at temperatures between 1000–1400 °C followed by water quenching, an intermetallic phase rich in tungsten, (Ni, Fe) W, evolved and surrounded the tungsten grains in clusters. The relative abundance of this intermetallic phase was highest for a solution treatment temperature of 1400 °C, indicating that the formation of this phase was a result of supersaturation of tungsten in the matrix phase and retarded partition of tungsten from the matrix phase to tungsten grains under a rapid cooling condition.     

Efficient Skyline and Top-k Retrieval in Subspaces

Skyline and top-k queries are two popular operations for preference retrieval. In practice, applications that require these operations usually provide numerous candidate attributes, whereas, depending on their interests, users may issue queries regarding different subsets of the dimensions. The existing algorithms are inadequate for subspace skyline/top-k search because they have at least one of the following defects: 1) they require scanning the entire database at least once, 2) they are optimized for one subspace but incur significant overhead for other subspaces, or 3) they demand expensive maintenance cost or space consumption. In this paper, we propose a technique SUBSKY, which settles both types of queries by using purely relational technologies. The core of SUBSKY is a transformation that converts multidimensional data to one-dimensional (1D) values. These values are indexed by a simple B-tree, which allows us to answer subspace queries by accessing a fraction of the database. SUBSKY entails low maintenance overhead, which equals the cost of updating a traditional B-tree. Extensive experiments with real data confirm that our technique outperforms alternative solutions significantly in both efficiency and scalability.     

振动最优控制问题的优化

本文提出系统振动最优控制问题的优化方法。首先给出最优线性二次控制的控制力 ,然后根据实际控制目标建立关于权值的约束条件 ,优化控制性能指标 ,以达到最优控制效果。最后 ,通过一个简单例子加以说明。     

海洋丝状真菌转化石油烃的研究

研究从湄洲湾海域分离的4株丝状真菌MF1，MF2，MF3，MF4的生长特性及去除油污的过程，观察在温度26℃，初始油浓度在3g/l,培养12d的过程中培养液的变化，分析培养液的pH值及原油的去除率与时间的关系，结果表明，丝状真菌去除原油的[过程是生物吸附与生物降解相结合的生物转化过程，比较革兰氏阴性细菌与丝状真菌细胞壁组成，结构，得出海洋微生物的脱油作用与其细胞壁有直接的关系。     

一种六辊矫直机电气控制系统设计

根据六辊矫直机的工程实例,结合矫直机的控制工艺以及控制特点,介绍了六辊矫直机控制系统的设计方法以及自动控制系统的实现方法;使用西门子S7-300PLC进行自动控制,对西门子MM440变频器进行PROFIBUS组态,以及通过西门子DI模块对绝对值型脉冲编码器的数据进行读取;解决了矫直机设备的自动运行与矫直速度的实时监控,以及上下辊间距的精确测量的问题;实验结果表明,控制系统运行稳定,辊间距测量精确无误,增加了矫直控制的精确性和稳定性,实现棒料矫直的自动化生产。