Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

Reconstruction of a high-resolution image on a compound-eye image-capturing system

The authors have proposed an architecture for a compact image-capturing system called TOMBO (thin observation module by bound optics), which uses compound-eye imaging for a compact hardware configuration [Appl. Opt. 40, 1806 (2001)]. The captured compound image is decomposed into a set of unit images, then the pixels in the unit images are processed with digital processing to retrieve the target image. A new method for high-resolution image reconstruction, called a pixel rearrange method, is proposed. The relation between the target object and the captured signals is estimated and utilized to rearrange the original pixel information. Experimental results show the effectiveness of the proposed method. In the experimental TOMBO system, the resolution obtained is four times higher than that of the unit image that did not undergo reconstruction processing.     

Helmholtz-Type Equations of State for Hydrocarbon Refrigerant Mixtures of Propane/n-Butane, Propane/Isobutane, n-Butane/Isobutane, and Propane/n-Butane/Isobutane

Highly accurate thermodynamic property models for binary and ternary hydrocarbon mixtures containing propane, n-butane, and isobutane have been developed. In the present model, reliable equations of state explicit in Helmholtz free energy for these three hydrocarbons that have already been developed by the present authors have been adapted. The excess term used to represent the contribution of mixing was optimized for each binary mixture by using the available experimental thermodynamic property data including PTx, isochoric heat capacity, and saturation properties (bubble-point pressures, mole fractions in the vapor phase, and saturated vapor- and liquid-densities) as input data. A generalized correction for the three binary mixtures, besides the ideal mixing, consists of only four terms in its functional form, the structure of which was determined by simultaneous optimization to the input data for the three binary mixtures by employing a stepwise regression analysis. The bank of terms, that is a matrix of candidate terms applied for the regression, was carefully prepared through detailed observation of the nonideal mixing representation of the experimental data of the three binary mixtures. No additional adjustable parameters were used in the present model for the ternary propane/n-butane/isobutane mixture. Based on comparisons with the available experimental data and values from the developed equations of state, the present models for the three binary and the ternary hydrocarbon mixtures accurately represent most of the reliable experimental data. In addition, the graphical tests of the derived thermodynamic properties show that the models, including that for the ternary mixture, provide a physically sound representation of all the thermodynamic properties over the entire fluid phase.     

Strong induction of phytochelatin synthesis by zinc in marine green alga, Dunaliella tertiolecta

Synthesis of phytochelatins (PCs), heavy-metal-sequestering peptides, in the marine green alga, Dunaliella tertiolecta, was evaluated under various conditions of exposure to heavy metals. To investigate the effect of heavy metals on both PC synthesis and their upstream biosynthetic reactions, an ion-pair-HPLC system was developed in this study, by which PCs and their biosynthetic intermediates, cysteine (Cys), gamma-glutamylcysteine (gammaEC) and glutathione (GSH), could be determined simultaneously with high sensitivity. When the cells were exposed to Zn2+, the level of PCs was maximal at 200 microM and significantly higher than that obtained after exposure to 400 microM Cd2+, which is the strongest inducer of PC synthesis in higher plants in vivo and in vitro as well as in microalgae. The predominant PC subtype was PC4, followed by PC3 and PC5, whereas PC2, which is generally abundant in higher plants, has the lowest level among PC2 to PC5. These results suggest that the characteristics of PC synthase in D. tertiolecta including the requirement of heavy metals for its catalysis and substrate specificity towards GSH and PC(n) are considerably different from those in higher plants and other algae. While PC synthesis proceeded in the heavy-metal-treated cells, the level of GSH did not appreciably change. To maintain the same size of the GSH pool, GSH must be newly synthesized to balance the amount consumed for PC synthesis.     

Ion-beam processing of single crystal diamond using SOG mask

Various ion-beam etching characteristics of diamond and selectivity between diamond and spin-on-glass (SOG) were examined. The maximum selectivity of diamond and SOG was 12.7 in oxygen reactive ion-beam etching process at 100 V acceleration voltage. Using this etching condition and dot-shaped SOG mask, conical diamond field electron emitter arrays with 30 nm curvature radius, 2.58 μm base radius and 5.86 μm height were fabricated.     

Immunomagnetic flow cytometric detection of staphylococcal enterotoxin B in raw and dry milk

A rapid and sensitive method for detection of staphylococcal enterotoxin B (SEB) in raw and dry milk samples with the use of antibody-based immunomagnetic separation (IMS) in conjunction with flow cytometry (FCM) was developed. Sheep anti-SEB immunoglobulin G (IgG) was immobilized on Dynabeads M-280. The SEB initially binds to the capturing antibody, which is bound on the magnetic beads. The rabbit anti-SEB IgG binds to the captured toxin and is further labeled with a Cy5-labeled goat anti-rabbit IgG antibody. The percentage of the beads that were fluorescent was measured by FCM. FCM was carried out for 1 min, and the data obtained were expressed as histograms for particle size (forward light scatter) and histograms for fluorescence intensity. A peak corresponding to the magnetic beads was clearly distinguished from a peak derived from contaminating particles in the sample solution. In the absence of SEB, about 10% of the beads emitted fluorescence. The percentage of fluorescent beads and the fluorescence intensity increased with increasing SEB concentrations. For this IMS-FCM assay, the lower limits of detection for SEB were estimated to be 0.01 and 0.25 ng/ml for buffer and milk samples, respectively.     

Rotary scanning wireless temperature measurement method for hyperthermia using ferromagnetic implants

Recently, the use of a ferromagnetic material in a soft‐heating method has garnered much attention as a novel method for cancer treatment. By concurrently using this material as a thermal probe, we are currently developing a minimally invasive heating and wireless temperature measurement system. To make the approach feasible in a clinical setting, it is vital to overcome the key challenge of heating the local tumor at a constant temperature. In previous conventional approaches, it was necessary to switch the induction‐heating power supply on/off after the target tumor temperature was reached. However, it cannot determine the temperature of the material during the power‐off period. Therefore, we changed this approach and found that by adjusting the distance between the heating coil and the material while maintaining a constant current flow in heating coil, the drift problem, which happened just after power is supplied during the on/off operation, did not occur any longer. Accordingly, it was not required to use multiple sensors to reduce the drift, thereby minimizing the cost. This study verifies the validity of our wireless thermometry approach while performing rotary scanning and proposes a technique for determining achievement of the target temperature. This knowledge complements other approaches for cancer treatment utilizing hyperthermia. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Ultra fine finishing of diamond tools by ion beams

The principles of ion beam machining and its apparatus are described, and several examples are given of ultra fine forming or sharpening diamond tools by ion beams. Problems, such as a sub-micrometre tip radius or elliptical tips are discussed, and it is concluded that ion beam machining combined with mechanical pre-finishing can be useful for forming or sharpening diamond tools.     

A 0.1-μm delta-doped MOSFET fabricated with post-low-energyimplanting selective epitaxy

A simple fabrication technology for delta-doped MOSFETs, named post-low-energy implanting selective epitaxy (PLISE) is presented. The PLISE technology needs no additional photo-lithography mask, deposition step or etching step even for CMOS devices. The only additional step is growing undoped epitaxial channel layers by UHV-CVD after the channel implantation. With this technology, delta-doped NMOSFETs with 0.1-μm gate length were successfully fabricated. By optimizing the epi-layer thickness and the channel doping level, short-channel effects are suppressed enough to achieve 0.1-μm gate length. Moreover, the junction capacitance at zero bias is reduced by 50%