Destruction of volatile organic compounds used in a semiconductorindustry by a capillary tube discharge reactor

Nonthermal plasma technologies offer an innovative approach to the problem of decomposing various volatile organic compounds (VOCs). The authors focused on DC capillary tube discharge plasma reactors to study the decomposition/destruction efficiency for toluene, EGM, trichloroethane and trichloroethylene at 50-2300 ppm levels in dry air. The effects of gas flow rate, VOC concentration and reactor operating conditions on decomposition and analysis of reactant conversion for each VOC were investigated. The results show that VOC destruction efficiency as high as 90% can be achieved, even under a short residence time (3.8 ms) with a destruction energy efficiency of up to 95 g (VOC)/kWh. Laboratory-scale plasma technology was successfully demonstrated for its potential application for VOC control in the semiconductor clean-room environment     

A 7 ns 1 Mb BiCMOS ECL SRAM with shift redundancy

A 7-Mb BiCMOS ECL (emitter coupled logic) SRAM was fabricated in a 0.8 μm BiCMOS process. An improved buffer with a high-level output of nearly V_CC is adopted to eliminate the DC current in the level converter circuit, and the PMOS transistor has a wide operating margin in the level converter. The configurable bit organization is realized by using a sense-amplifier switch circuit with no access degradation. A wired-OR demultiplexer for the ×1 output, having the same critical path as the ×4 output circuit, allows for the same access time between the two modes. The ×1 or ×4 mode is electrically selected by the external signal. A simplified programming redundancy technology, shift redundancy, is utilized. Address programming is performed by cutting only one fuse in the shift redundancy. The RAM operates at the ECL-10K level with an access time of 7 ns. and the power dissipation at 50 MHz is 600 mW for the × mode     

Extraction of a plasma time-activity curve from dynamic brain PET images based on independent component analysis

A compartment model has been used for kinetic analysis of dynamic positron emission tomography (PET) data [e.g., 2-deoxy-2-18F-fluoro-D-glucose (FDG)]. The input function of the model [the plasma time-activity curve (pTAC)] was obtained by serial arterial blood sampling. It is of clinical interest to develop a method for PET studies that estimates the pTAC without needing serial arterial blood sampling. For this purpose, we propose a new method to extract the pTAC from the dynamic brain PET images using a modified independent component analysis [extraction of the pTAC using independent component analysis (EPICA). Source codes of EPICA are freely available at http://www5f.biglobe.ne.jp/?kimura/Software/top.html]. EPICA performs the appropriate preprocessing and independent component analysis (ICA) using an objective function that takes the various properties of the pTAC into account. After validation of EPICA by computer simulation, EPICA was applied to human brain FDG-PET studies. The results imply that the EPICA-estimated pTAC was similar to the actual measured pTAC, and that the estimated blood volume image was highly correlated with the blood volume image measured using 15O-CO inhalation. These results demonstrated that EPICA is useful for extracting the pTAC from dynamic PET images without the necessity of serial arterial blood sampling.     

Validation of temporal BRDFs of paddy fields estimated from MODIS reflectance data

The effect of the bidirectional reflectance distribution function (BRDF) is one of the most important factors in correcting and validating the reflectance obtained from remotely sensed data. While the importance of BRDF has become widely recognized, bidirectional reflectance factor (BRF) data measured for correction and validation are insufficient because of the technical difficulty of the measurement. The primary objective of the present research is to estimate BRDF effects from Moderate Resolution Imaging Spectroradiometer (MODIS) data. Temporal ground-based BRDFs of rice paddy fields were estimated from ground measurements conducted in June and August 2002. MODIS-derived BRDFs obtained from MODIS reflectance data and ground-based BRDFs were estimated using the reciprocal form of the RossThick and LiSparse (RossThick-LiSparse-R) kernels, a semiempirical BRDF model adopted for the operational MODIS BRDF product. The MODIS-derived band 1 (620-680 nm) and band 2 (841-876 nm) BRDFs were compared with the ground-based BRDFs corresponding to the same waveband, respectively. The comparison results demonstrate that BRDFs of paddy fields change in accordance with paddy growth and that MODIS-derived BRDFs are closely related to ground-based BRDFs in most of the cases. It was also revealed that MODIS-derived BRDFs can be estimated to a high degree of accuracy when MODIS data necessary for the estimation are available.     

A spherical aberration-corrected 200 kV TEM

A spherical aberration (Cs)-corrected 200 kV TEM was newly developed. The column of the microscope was extended by 25 cm and the inner yoke of the objective lens was modified to insert some parts of the corrector elements. The corrector has two hexapole elements that play a main role in Cs correction and they are placed at a position equivalent to the coma-free point of the objective lens by using two transfer doublet lenses. The Cs correction was successfully carried out by means of the third-order aberration that was generated in the two extended hexapoles. The Cs can be corrected to the desired value and also can be overcompensated in order to produce a negative Cs, as with the corrected Cs of -23 microm shown in this work. The optical system of the corrector does not produce second- and fourth-order aberrations, and can correct residual aberrations up to the third order. All of the corrector elements are computer-controlled and the third-order aberrations are quite stable after they are properly corrected. The resolution of 0.135 nm was experimentally confirmed by the Young's fringe method. Image simulations of a silicon [110] single crystal were made with various Cs and defocus values to demonstrate the effectiveness of arbitral control of Cs.     

Statistical analysis for multiplicatively modulated nonlinear autoregressive model and its applications to electrophysiological signal analysis in humans

Modulating the dynamics of a nonlinear autoregressive model with a radial basis function (RBF) of exogenous variables is known to reduce the prediction error. Here, RBF is a function that decays to zero exponentially if the deviation between the exogenous variables and a center location becomes large. This paper introduces a class of RBF-based multiplicatively modulated nonlinear autoregressive (mmNAR) models. First, we establish the local asymptotic normality (LAN) for vector conditional heteroscedastic autoregressive nonlinear (CHARN) models, which include the mmNAR and many other well-known time-series models as special cases. Asymptotic optimality for estimation and testing is described in terms of LAN properties. The mmNAR model indicates goodness-of-fit for surface electromyograms (EMG) using electrocorticograms (ECoG) as the exogenous variables. Concretely, it is found that the negative potential of the motor cortex forces change in the frequency of EMG, which is reasonable from a physiological point of view. The proposed mmNAR model fitting is both useful and efficient as a signal-processing technique for extracting information on the action potential, which is associated with the postsynaptic potential.     

Enhanced heat transfer during oscillatory flow in annular channels

Heat transfer during oscillatory flow in a circular straight tube with a solid‐core tube inserted in its center was numerically simulated. The purpose of the solid‐core tube is to enhance axial heat transfer by increasing the lateral heat transfer effect for high frequency of the oscillatory flow. Simulation results showed that (a) axial heat transfer increases with the increasing diameter of the solid‐core tube, (b) the material of the solid‐core tube does not significantly affect axial heat transfer, and (c) efficiency based on the ratio of heat transfer to the work done is higher than that in a bundle of circular capillary tubes. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(1): 61–74, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20094     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Autonomous Variable‐Resolution Map Building for Mobile Robots in Unknown Environments

This paper presents a method that allows simultaneous map building and path planning for mobile robots in unknown environments. A graphical representation of a workspace in variable resolutions is constructed using measurement data obtained by omnidirectional distance sensors. At the same time, a search for a feasible path to the target destination is executed using the constructed graph map. The proposed method is evaluated by performing simulations and experiments using an omnidirectional mobile robot equipped with laser range finders. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 59–69, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22493     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476