Structural change of water with solutes and temperature up to 100 degrees C in aqueous solutions as revealed by attenuated total reflectance infrared spectroscopy

The attenuated total reflectance infrared (ATR-IR) spectra of several aqueous solutions have been measured by using a newly developed heatable rod-type ATR cell. The OH stretching bands showed systematic change with increasing solute concentrations and these changes can be explained by four different OH components based on curve-fitting results. NaCl solutions show longer H-bond distance character, while carbonate solutions present shorter ones. The Na2CO3 1 M solution conserves this shorter H-bond nature up to 100 degrees C. On the other hand, the loose nature of NaCl solutions becomes less pronounced at higher temperatures because of the dissociation of pure water clusters. These in situ observations of water structures are generally in agreement with the expected nature of fluids within the earth.     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Magnetization Curve of Two-Dimensional Anti-ferromagnetic Solid 3He on Graphite

Two-dimensional anti-ferromagnetic solid ³He on graphite, so called 4/7 phase, is a highly frustrated magnetic system and its ground state is considered to be a gapless spin liquid. Then how is the behavior in high magnetic fields? We tried to observe the magnetization curve at around 1 mK in high magnetic fields up to 10 T, using a Faraday-type magnetometer. To eliminate a large background signal from graphite as a substrate and copper as a thermal link, a double gradient coil system is employed to produce opposite field gradients in two regions equidistant from the field center. Preliminary results of the 4/7 phase on graphite show no saturated magnetization even at 1 mK and 10 T, suggesting the existence of magnetization plateau.     

A novel spacer‐free panel structure and glass for FEDs

Abstract— A new design for an FED envelope, composed of box‐shaped front glass, sheet‐like rear glass, and metal members, has been devised. This design structure is effective in reducing tensile stress induced by vacuum at the sealing points. Also, a new glass composition, a new physical tempering method, and a lead‐free hermetic sealing material have been developed. As a result, a novel lightweight spacer‐free panel structure for FEDs has been developed by integrating these new technologies. It will assist in maximizing the essential advantages of FED such as high image quality, high reliability, and low cost.     

Color displays and flexible displays using quick‐response liquid‐powder technology for electronic paper

Abstract— Color displays and flexible displays that use electronic liquid powder have been developed. Novel types of color displays using either a colored powder or a color filter are discussed. We have also developed a flexible display with low‐cost substrate films with a high‐throughput roll‐to‐roll manufacturing method. These technologies enable a QR‐LPD to be widely used as an electronic‐paper display.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

A Theory of Minimal 3D Point to 3D Plane Registration and Its Generalization

Registration of 3D data is a key problem in many applications in computer vision, computer graphics and robotics. This paper provides a family of minimal solutions for the 3D-to-3D registration problem in which the 3D data are represented as points and planes. Such scenarios occur frequently when a 3D sensor provides 3D points and our goal is to register them to a 3D object represented by a set of planes. In order to compute the 6 degrees-of-freedom transformation between the sensor and the object, we need at least six points on three or more planes. We systematically investigate and develop pose estimation algorithms for several configurations, including all minimal configurations, that arise from the distribution of points on planes. We also identify the degenerate configurations in such registrations. The underlying algebraic equations used in many registration problems are the same and we show that many 2D-to-3D and 3D-to-3D pose estimation/registration algorithms involving points, lines, and planes can be mapped to the proposed framework. We validate our theory in simulations as well as in three real-world applications: registration of a robotic arm with an object using a contact sensor, registration of planar city models with 3D point clouds obtained using multi-view reconstruction, and registration between depth maps generated by a Kinect sensor.     

Simulation on contact between the droplet and the slider at head-disk interface based on water-hammer pressure model

To understand the cause of read/write error due to lube accumulation, a model to simulate the slider’s response to the contact impact, which can occur between a lubricant droplet on the disk and a slider, was developed. The contact impact model is based on the water-hammer pressure model with an additional damping force, where the wave-shock pressure is assumed to function as the contact pressure, and the damping force defines the damping characteristics of the impact which are due to the lubricant’s high viscosity and squeeze between the droplet and slider contact area along the slider local velocity direction. The transient contact impact is dependent on lube droplet density, disk velocity, pitch angle of the slider, and contact area between the droplet and the slider. The measured read/write signal jump due to lube pickup can be explained by the simulation results. This modeling and simulation are helpful to us in understanding the read/write signal loss due to a lube droplet at head disk interface.     

Fatigue threshold and low-rate crack propagation properties for structural steels in 3 Pct sodium chloride aqueous solution

The fatigue threshold and low-rate crack propagation properties for a carbon steel, two high-strength steels, and two stainless steels were investigated in a 3 pct sodium chloride aqueous solution at frequencies between 0.03 and 30 Hz. Tests were conducted in a manner designed to avoid crack closure. Under freely corroding conditions, the effective values of the threshold stress intensity factor range, ΔK_th,eff, were lower than in air for all of the steels. In particular, the ΔK_th,eff values for the carbon and high-strength steels were almost equal to the theoretical ΔKth value of about 1 MPa m^1/2 calculated on the basis of the dislocation emission from the crack tip. At a given ΔK level higher than the threshold, the fatigue crack propagation rates accelerated with decreasing frequency for all of the steels. Under cathodic protection, the threshold and fatigue crack propagation properties were coincident with those in air regardless of material and frequency. The observed fatigue crack propagation behavior in a 3 pct NaCl solution was closely related to the corrosion reaction of the bare surface formed at the crack tip during each loading cycle.