Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.     

Polytetrafluoroethylene processing characteristics using high-energy X-ray

Polytetrafluoroethylene (PTFE) microstructures’ processing characteristics using X-ray photo dcomposition and desorption are studied in the highest energy region (2 keV to >12 keV). While the exposed surface states are seen melting and boiling from the remaining bubble structure of the irradiated surface, basic photochemistry of PTFE is also same as previous reports and high-aspect ratio structures are successfully formed. We developed new Ni stencil electroformed stencil masks and successfully fabricated first and practical example of PTFE micro fluidic parts. The characteristics of fabricated micro fluidic parts, a PTFE fluid filter for vertical fluid flow operation which works as passive valve, agreed with the calculated results. This suggests that the accuracy of patterning is adequate to apply this technique to fabricate microfluidic parts and other various microparts.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

Principles and performance analysis of SeCond: A system for epidemic peer-to-peer content distribution

We propose and design a peer-to-peer system, SeCond, addressing the distribution of large sized content to a large number of end systems in an efficient manner. In contrast to prior work, it employs a self-organizing epidemic dissemination scheme for state propagation of available blocks and initiation of block transmissions. In order to exploit heterogeneity of peers, enhance the utilization of system resources and for the ease of deployment, scalability, and adaptivity to dynamic peer arrivals/departures, we propose mechanisms for adjusting protocol parameters dynamically according to the bandwidth usages. We describe design and analysis details of our protocol SeCond. Comprehensive performance evaluations and comparison with the BitTorrent system model have been accomplished for a wide range of scenarios. Performance results include scalability analysis for different arrival/departure patterns, flash-crowd scenario, overhead analysis, and fairness ratio. The major metrics we study include the average file download time, load on the primary seed, uplink/downlink utilization, and communication overhead. We show that SeCond is a scalable and adaptive protocol which takes the heterogeneity of the peers into account. The protocol is as fair as BitTorrent although it has no explicit strategy addressing free-riding. We also illustrate the applicability of an analytical fluid model to the behavior of SeCond.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Metal Single-Atom Cocatalyst on Carbon Nitride for the Photocatalytic Hydrogen Evolution Reaction: Effects of Metal Species

Single-atom (SA) catalysts exhibit high activity in various reactions because there are no inactive internal atoms. Accordingly, SA cocatalysts are also an active research fields regarding photocatalytic hydrogen (H₂) evolution which can be generated by abundant water and sunlight. Herein, it is investigated whether 10 transition metal elements can work as an SA on graphitic carbon nitride (g-C₃N₄; i.e., gCN), a promising visible-light-driven photocatalyst. A method is established to prepare SA-loaded gCN at high loadings (weight of ≈3 wt.% for Cu, Ni, Pd, Pt, Rh, and Ru) by modulating the photoreduction power. Regarding Au and Ag, SAs are formed with difficulty without aggregation because of the low binding energy between gCN and the SA. An evaluation of the photocatalytic H₂-evolution activity of the prepared metal SA-loaded gCN reveals that Pd, Pt, and Rh SA-loaded gCN exhibits relatively high H₂-evolution efficiency per SA. Transient absorption spectroscopy and electrochemical measurements reveal the following: i) Pd SA-loaded gCN exhibits a particularly suitable electronic structure for proton adsorption and ii) therefore they exhibit the highest H₂-evolution efficiency per SA than other metal SA-loaded gCN. Finally, the 8.6 times higher H₂-evolution rate per active site of Pd SA is achieved than that of Pd-nanoparticles cocatalyst.     

A novel radial orientation treatment of nematic liquid crystals using magnetic field lines with permanent magnet and applying the assisted electric field

Recently, there has been considerable research on optical devices, such as liquid crystal (LC) lenses and special optical plates, using LCs. In such devices, relatively small LC cells are frequently used, or unique LC orientations are required. As an LC orientation process, we focused on the LC director's orientation induced by the magnetic force line distribution of a small neodymium magnet. We propose a simple method for obtaining radial orientation, which is rather difficult to obtain using the ordinary rubbing method. The initial orientation in the LC cell is a vertical orientation cell with almost zero azimuth anchoring. With the proposed method, the reorientation process is performed with an assisting electric field and a small permanent magnet, unlike the conventional magnetic field orientation process that requires a large electromagnet. Furthermore, a polymer stabilization treatment is used to fix the obtained radial orientation pattern in the LC cell. After the treatment, the applying voltage can control the tilt angle of the director in weak polymer treatment, and a completely fixed orientation pattern can be obtained that in strong.