Optical topography: practical problems and new applications

We will briefly review the present status of optical topography and then discuss the method of improving practicality, i.e., the signal-to-noise (S/N) ratio and the spatial resolution in observations of higher-order brain functions. The optimum wavelength pair improved the S/N ratio sixfold for deoxyhemoglobin, and new configurations of light irradiation and detection positions doubled the spatial resolution. We also report on developing application fields of optical topography. This modality will bridge the gap between natural sciences, neuroscience, and pedagogy, and show actual real-time brain activity.     

Efficient frequency doubling of 1-W continuous-wave Ti:sapphire laser with a robust high-finesse external cavity

We demonstrated an intrinsic conversion efficiency of 56% from the input fundamental power to the generated second-harmonic power. The second-harmonic power of 581 mW was obtained from the external cavity with a LiB3O5 crystal through the frequency doubling of a 1.17-W Ti:sapphire laser at 746 nm, when the finesse of the robust external cavity was 260.     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Magnetization Curve of Two-Dimensional Anti-ferromagnetic Solid 3He on Graphite

Two-dimensional anti-ferromagnetic solid ³He on graphite, so called 4/7 phase, is a highly frustrated magnetic system and its ground state is considered to be a gapless spin liquid. Then how is the behavior in high magnetic fields? We tried to observe the magnetization curve at around 1 mK in high magnetic fields up to 10 T, using a Faraday-type magnetometer. To eliminate a large background signal from graphite as a substrate and copper as a thermal link, a double gradient coil system is employed to produce opposite field gradients in two regions equidistant from the field center. Preliminary results of the 4/7 phase on graphite show no saturated magnetization even at 1 mK and 10 T, suggesting the existence of magnetization plateau.     

An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances

While the matrix converter has many advantages that include bidirectional power flow, a size reduction, a long lifetime, and sinusoidal input currents, it is vulnerable to the input voltage disturbances, because it directly exchanges the input voltage to the output voltage. The instantaneous effective power control (IEPC) method has been proposed to compensate the input voltage disturbances, in which the instantaneous effective power is kept constant by controlling input current. However, to date, no method has been proposed to maintain the stability of the system with the IEPC. The purpose of this paper is to propose a method to control the stability of the system with IEPC. First, this paper explains the IEPC theoretically. Next, a model of the system with the IEPC is developed, and stability analyses are conducted. Then, based on the results of the analyses, a stability control method for the system with the IEPC is proposed. Furthermore, the validities of the proposed method are demonstrated by simulation and experiments. Finally, a restart performance of the system after momentary power interruption is discussed. Because the IEPC does not need phase-locked-loop to detect the phase angle of the input voltage, fast restart is expected     

A novel spacer‐free panel structure and glass for FEDs

Abstract— A new design for an FED envelope, composed of box‐shaped front glass, sheet‐like rear glass, and metal members, has been devised. This design structure is effective in reducing tensile stress induced by vacuum at the sealing points. Also, a new glass composition, a new physical tempering method, and a lead‐free hermetic sealing material have been developed. As a result, a novel lightweight spacer‐free panel structure for FEDs has been developed by integrating these new technologies. It will assist in maximizing the essential advantages of FED such as high image quality, high reliability, and low cost.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.     

A Theory of Minimal 3D Point to 3D Plane Registration and Its Generalization

Registration of 3D data is a key problem in many applications in computer vision, computer graphics and robotics. This paper provides a family of minimal solutions for the 3D-to-3D registration problem in which the 3D data are represented as points and planes. Such scenarios occur frequently when a 3D sensor provides 3D points and our goal is to register them to a 3D object represented by a set of planes. In order to compute the 6 degrees-of-freedom transformation between the sensor and the object, we need at least six points on three or more planes. We systematically investigate and develop pose estimation algorithms for several configurations, including all minimal configurations, that arise from the distribution of points on planes. We also identify the degenerate configurations in such registrations. The underlying algebraic equations used in many registration problems are the same and we show that many 2D-to-3D and 3D-to-3D pose estimation/registration algorithms involving points, lines, and planes can be mapped to the proposed framework. We validate our theory in simulations as well as in three real-world applications: registration of a robotic arm with an object using a contact sensor, registration of planar city models with 3D point clouds obtained using multi-view reconstruction, and registration between depth maps generated by a Kinect sensor.     

Simulation on contact between the droplet and the slider at head-disk interface based on water-hammer pressure model

To understand the cause of read/write error due to lube accumulation, a model to simulate the slider’s response to the contact impact, which can occur between a lubricant droplet on the disk and a slider, was developed. The contact impact model is based on the water-hammer pressure model with an additional damping force, where the wave-shock pressure is assumed to function as the contact pressure, and the damping force defines the damping characteristics of the impact which are due to the lubricant’s high viscosity and squeeze between the droplet and slider contact area along the slider local velocity direction. The transient contact impact is dependent on lube droplet density, disk velocity, pitch angle of the slider, and contact area between the droplet and the slider. The measured read/write signal jump due to lube pickup can be explained by the simulation results. This modeling and simulation are helpful to us in understanding the read/write signal loss due to a lube droplet at head disk interface.