Ion beam analyses of particulate matter in exhaust gas of a ship diesel engine

There is an urgent need to reduce emission of the particulate matter (PM) in the exhaust gas from ship diesel engines causing various health hazards and serious environmental pollution. Usually the heavy fuel oil (HFO) for ships is of low quality, and contains various kinds of impurities. Therefore, the emission of PM along with exhaust gas from ship diesel engines is one of the most serious environmental issues. However, the PM fundamental properties are not well known. Therefore, it is important to perform elemental analysis of the PM. The HFO contains sulfur with a relatively high concentration of a few percent. It is important to make quantitative measurements of sulfur in the PM, because this element is poisonous for the human body. In the present work, PM samples were collected from exhaust gas of a test engine, and RBS and PIXE analyses were applied successfully to quantitative analysis of the PM samples. The RBS analysis enabled quantitative analysis of sulfur and carbon in the collected PM, while heavier elements such as vanadium and iron were analyzed quantitatively with the PIXE analysis. It has been found that the concentration ratio of sulfur to carbon was between 0.007 and 0.012, and did not strongly depend on the output power of the engine. The S/C ratio is approximately equal to the original composition of the HFO used in the present work, 0.01. From the known conversion ratio 0.015 of sulfur in the HFO to sulfates, the conversion ratio of carbon in the HFO to the PM is found to be 0.01-0.02 by the RBS measurements. On the other hand, the PIXE analysis revealed a vanadium enrichment of one order of magnitude in the PM.     

Review of studies on criticality safety evaluation and criticality experiment methods

Since the early 1960s, many studies on criticality safety evaluation have been conducted in Japan. Computer code systems were developed initially by employing finite difference methods, and more recently by using Monte Carlo methods. Criticality experiments have also been carried out in many laboratories in Japan as well as overseas. By effectively using these study results, the Japanese Criticality Safety Handbook was published in 1988, almost the intermediate point of the last 50 years. An increased interest has been shown in criticality safety studies, and a Working Party on Nuclear Criticality Safety (WPNCS) was set up by the Nuclear Science Committee of Organisation Economic Co-operation and Development in 1997. WPNCS has several task forces in charge of each of the International Criticality Safety Benchmark Evaluation Program (ICSBEP), Subcritical Measurement, Experimental Needs, Burn-up Credit Studies and Minimum Critical Values. Criticality safety studies in Japan have been carried out in cooperation with WPNCS. This paper describes criticality safety study activities in Japan along with the contents of the Japanese Criticality Safety Handbook and the tasks of WPNCS.     

Radon inhalation suppresses nephropathy in streptozotocin-induced type-1 diabetic mice

In this study, we investigated the suppressive effects of radon inhalation against nephropathy in C57BL/6J mice with type-1 diabetes induced by intraperitoneal injection of streptozotocin (50 mg/kg weight, given five times). Four weeks after diabetes induction, the diabetic mice were continuously treated with inhaled radon-222 of 2000 Bq/m³ or air only (sham) for four weeks. The results showed that radon inhalation did not affect type-1 diabetic symptoms such as body weight loss, hyperglycemia, and hypoinsulinemia. However, diabetic mice treated with radon showed lower urinary albumin excretion and fibrotic change in renal glomeruli compared with diabetic mice not treated with radon. Furthermore, renal superoxide dismutase activity and glutathione content were significantly higher in diabetic mice treated with radon than in diabetic mice not treated with radon. These findings suggested that radon inhalation enhanced renal antioxidants activities, resulting in the suppression of diabetic nephropathy. This study may contribute to the development of a novel approach in the treatment of nephropathy for diabetic patients.     

Microanalysis of silica-based adsorbent for effective recovery of radioactive elements

For effective recovery of radioactive elements by adsorbents using polymer-immobilized silica (SiO₂-P) supports, the microstructure of SiO₂-P particles impregnated with octyl(phenyl)-N, N-diisobutylcarbamoylmethylphosphine oxide as extractants and their change with the crosslinking degree of polymer (CDP) were investigated using scanning transmission X-ray microscopy (STXM) and extended X-ray absorption fine structures (EXAFS) analyses; further, their relation with adsorption/elution behavior was discussed. The results of STXM analysis suggested that the polymer is distributed within several hundred nanometers of the pore surface, and its distributions are spread by the increase of CDP. In addition, the capture of impurity molecules such as H₂O by polymers with high CDP was indicated. EXAFS analyses showed that the local structure around adsorbed europium ions is similar irrespective of the CDP. The adsorption/elution tests demonstrated that a higher CDP inhibited the elution of adsorbed europium ions from the adsorbent.     

Identification of the luciferin-luciferase system and quantification of coelenterazine by mass spectrometry in the deep-sea luminous ostracod Conchoecia pseudodiscophora

The bioluminescence system of the ostracod Conchoecia pseudodiscophora, which is abundant in the Sea of Japan, has been characterized. The luminescence (lambda(max)=463 nm) is produced by a luciferin-luciferase reaction, and the luciferin has been identified as coelenterazine. Coelenterazine, coelenteramide, and coelenteramine from C. pseudodiscophora were quantified by LC-ESI-MS/MS analysis. The coelenterazine content was estimated to be approximately 230 pg per animal by using a calibration curve of synthetic coelenterazine. The reaction between homogenates of C. pseudodiscophora and synthetic coelenterazine showed luminescence activity; this suggests that a coelenterazine-type luciferase is present.     

State waypoint approach to continuous‐time nonlinear optimal control problems

In this paper, we propose an optimal control technique for a class of continuous‐time nonlinear systems. The key idea of the proposed approach is to parametrize continuous state trajectories by sequences of a finite number of intermediate target states; namely, waypoint sequences. It is shown that the optimal control problem for transferring the state from one waypoint to the next is given an explicit‐form suboptimal solution, by means of linear approximation. Thus the original continuous‐time nonlinear control problem reduces to a finite‐dimensional optimization problem of waypoint sequences. Any efficient numerical optimization method, such as the interior‐reflection Newton method, can be applied to solve this optimization problem. Finally, we solve the optimal control problem for a simple nonlinear system example to illustrate the effectiveness of this approach. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Recovery of boron from borax sludge of boron industry

A two-step process for boron recovery from borax sludge is proposed in the present work. The borax sludge was leached with sulphuric acid solution. Then, for the removal of alkaline species from the leachate, calcium and magnesium were precipitated by adjusting the pH of leachate using 1.5 M NaOH and 1.5 M HCl solutions. The effects of pH, temperature, concentration and time on the precipitation process were investigated. It was determined that the calcium and magnesium concentrations in the leachate were reduced from 121 mg/L to 2.6 mg/L and from 145 mg/L to 4.0 mg/L, respectively, at a pH value of 12, a temperature of 70 °C, an initial boron concentration of 500 mg/L and a precipitation time of 3 h. Under these optimum conditions, it was observed that the boron concentration in the solution decreased very slightly. In this process, the alkaline species were successfully separated from the boron.Finally, borax pentahydrate (Na₂B₄O₇·5H₂O) was produced by the evaporation of the final solution obtained after precipitation process.     

Weighted nearest neighbor algorithms for the graph exploration problem on cycles

In the graph exploration problem, a searcher explores the whole set of nodes of an unknown graph. We assume that all the unknown graphs are undirected and connected. The searcher is not aware of the existence of an edge until he/she visits one of its endpoints. The searcher's task is to visit all the nodes and go back to the starting node by traveling a tour as short as possible. One of the simplest strategies is the nearest neighbor algorithm (NN), which always chooses the unvisited node nearest to the searcher's current position. The weighted NN (WNN) is an extension of NN, which chooses the next node to visit by using the weighted distance. It is known that WNN with weight 3 is 16-competitive for planar graphs. In this paper we prove that NN achieves the competitive ratio of 1.5 for cycles. In addition, we show that the analysis for the competitive ratio of NN is tight by providing an instance for which the bound of 1.5 is attained, and NN is the best for cycles among WNN with all possible weights. Furthermore, we prove that no online algorithm to explore cycles is better than 1.25-competitive.     

Fluid filter fabricated by deep X-ray lithography for micro fluidics

A new method and fluid filter with micro through capillary array for high-throughput micro fluidics were proposed and fabricated. The method, utilizing liquid surface tension and directing fluid flow in vertical direction, was achieved by using the fluid filter we originally proposed. The computational fluid dynamics analysis was conducted to examine the feasibility of vertical fluid flow operation using the fluid filter. And the results indicated that the vertical fluid flow operation is useful and the good properties of the fluid filter. Fabrication of fluid filter was successfully conducted by using deep X-ray lithography. And vertical fluid flow operation and its high throughput properties were successfully demonstrated.