Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

Microstructure development of steel during severe plastic deformation

The microstructure development during plastic deformation was reviewed for iron and steel which were subjected to cold rolling or mechanical milling (MM) treatment, and the change in strengthening mechanism caused by the severe plastic deformation (SPD) was also discussed in terms of ultra grain refinement behavior. The microstructure of cold-rolled iron is characterized by a typical dislocation cell structure, where the strength can be explained by dislocation strengthening. It was confirmed that the increase in dislocation density by cold working is limited at 10¹⁶m⁻², which means the maximum hardness obtained by dislocation strengthening is HV3.7 GPa. However, the iron is abnormally work-hardened over the maximum dislocation strengthening by SPD of MM because of the ultra grain refinement caused by the SPD. In addition, impurity of carbon plays an important role in such grain refinement: the carbon addition leads to the formation of nano-crystallized structure in iron.     

Improvement of Formability by Oscillation of Internal Pressure in Pulsating Hydroforming of Tube

A new history of internal pressure in the hydroforming processes of tubes is developed to attain high formability. The effect of improvement of formability by the oscillation of internal pressure in a pulsating hydroforming process of tubes is examined using both finite element simulation and experiment. The deformation behaviour during the hydroforming is greatly affected by the oscillation of internal pressure. For a monotonic history of small internal pressure, the wrinkling was caused by insufficient bulging, whereas the necking and bursting occurred for a monotonic history of large internal pressure. The occurrence of these defects can be avoided by oscillating the internal pressure in the pulsating hydroforming. The improvement of formability in the pulsating hydroforming is due to both low pressure and oscillation of pressure. The effects of the amplitude and cycle number of pressure in the pulsating hydroforming on the deformation behaviour are investigated. It is found the oscillation of internal pressure is effective in preventing the occurrence of defects.     

Data Center as a Key Player of a District Electric Power and Heat Network System： A Comparison in Urban and Suburb Regions

A DC （data center） demands air-conditioning power as large as the 1/3-1/2 of total electricity consumption. Thus, energy saving of cooling power of DC yields considerable effect on both economic and environmental views. PV （Photovoltaic） and absorption refrigerator with CGS （cogeneration systems） or gas boiler are possible power saving options. The waste warm air from DC would be utilized for greenhouse heating when DC and greenhouse locate near in the suburbs. In this study, the authors develop an energy network model to assess the potential contribution of DC as a major electric power and chilled air consumer as well as the warm air supplier in a district to the energy efficiency improvement. The evaporation heat of LNG （liquefied natural gas） utilization is also considered as well as PV, CGS. This model is applied to the cases of the urban area in Tokyo which involves athletic center, shops and hospital and the suburbs including greenhouse and then compared.     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.     

Autonomic load balancing of flow monitors

In monitoring flows at routers for flow analysis or deep packet inspection, the monitor calculates hash values from the flow ID of each packet arriving at the input port of the router. Therefore, the monitors must update the flow table at the transmission line rate, so high-speed and high-cost memory, such as SRAM, is used for the flow table. This requires the monitors to limit the monitoring target to just some of the flows. However, if the monitors randomly select the monitoring targets, multiple routers on the route will sometimes monitor the same flow, or no monitors will monitor a flow. To maximize the number of monitored flows in the entire network, the monitors must select the monitoring targets while maintaining a balanced load among them. We propose an autonomous load-balancing method where monitors exchange information on monitor load only with adjacent monitors. Numerical evaluations using the actual traffic matrix of Internet2 show that the proposed method improves the total monitored flow count by about 50% compared with that of independent sampling. Moreover, we evaluate the load-balancing effect on 36 backbone networks of commercial ISPs.     

Polytetrafluoroethylene processing characteristics using high-energy X-ray

Polytetrafluoroethylene (PTFE) microstructures’ processing characteristics using X-ray photo dcomposition and desorption are studied in the highest energy region (2 keV to >12 keV). While the exposed surface states are seen melting and boiling from the remaining bubble structure of the irradiated surface, basic photochemistry of PTFE is also same as previous reports and high-aspect ratio structures are successfully formed. We developed new Ni stencil electroformed stencil masks and successfully fabricated first and practical example of PTFE micro fluidic parts. The characteristics of fabricated micro fluidic parts, a PTFE fluid filter for vertical fluid flow operation which works as passive valve, agreed with the calculated results. This suggests that the accuracy of patterning is adequate to apply this technique to fabricate microfluidic parts and other various microparts.