The preparation of copper fine particle paste and its application as the inner electrode material of a multilayered ceramic capacitor

Well size-controlled copper fine particles (diameter: 100-300?nm) were used as the inner electrode material of multilayered ceramic capacitors (MLCCs). The particles were dispersed in terpineol to form a printing paste with 50?wt% copper particles. The MLCC precursor modules prepared by the layer-by-layer printing of copper and BaTiO(3) particles were cosintered. Detailed observation of the particles, paste, and MLCCs before and after sintering was carried out by electron microscopy. The sintering temperature of Cu-MLCC was as low as 960?°C. The permittivity of these MLCCs was successfully measured with the copper inner layers.     

Two-dimensionally quantized friction observed with two-dimensional frictional force microscope

Using a two-dimensional frictional force microscope, we studied the two-dimensional nature of the atomic scale friction between a Si₃N₄ sharp tip and a cleaved graphite surface, which is composed of only C atoms and is a good conductor. As a result, we observed the two-dimensionally quantized friction with the lattice periodicity of the graphite surface, similarly to mica, MoS₂ and NaF surfaces. Thus quantized friction occurs at material surfaces which are composed of not only some elements but also of a single element, and the quantized friction does not depend on the conductivity of the surface.     

Investigation of reacting flow fields in miscible viscous fingering by a novel experimental method

The reacting flow fields in reactive miscible viscous fingering in a Hele‐Shaw cell studied by Nagatsu and Ueda had not been completely elucidated, mainly because one cannot exactly recognize where and when the reaction takes place in the reactive fingering pattern. We developed a novel experimental method that allowed us to identify the reaction region in the fingering pattern employed in the previous studies. The novel method involves switching of the less‐viscous liquid injected in both the nonreactive and reactive experiments. By using the novel method, we succeeded in showing how the reaction region in the fingering pattern was affected by the initial reactant concentrations, the Péclet number, and time. We propose physical models of the reacting flow field in the cell's gap direction that can explain the obtained experimental results. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Tofu: A 6D Mesh/Torus Interconnect for Exascale Computers

A new architecture with a six-dimensional mesh/torus topology achieves highly scalable and fault-tolerant interconnection networks for large-scale supercomputers that can exceed 10 petaflops.     

Development of a high‐definition 32‐in. PDP

We developed the world's smallest‐profile 32‐in. HDTV PDP. By improving the luminous efficiency, a luminance of 650 cd/m² and power consumption (discharge and driving circuit) of 200 W or less was achieved. Moreover, incorporating an advanced color compensating (ACC) filter improved the PDP's color‐reproduction capability, better than that of CRTs.     

Quantitative acoustic emission source characterization of microcrackings in steel

Acoustic emission (AE) source wave analysis is a new NDE technique for the investigation of dynamic fracture process. We applied this technique to the quantitative characterization of crack sources in ductile fracture. Using two samples of ASTM A533B steel with different sulfur content, acoustic emissions during fracture toughness tests were detected, located, and analyzed. The detected AE signals were classified into two types according to the analyzed source waveforms. One was a signal due to microcracking at the MnS inclusion, and the other was a signal due to coalescence of the voids. The results of the source wave analysis showed that microcracking at the inclusions was due to Mode I type tension crack with sizes of 10–30 µm, and the coalescence of the voids was due to tension shear mixed cracks with sizes of 60–100 µm. It was confirmed that this technique is very effective for the quantitative evaluation of microcrackings and for the detection of the nucleation and growth of cracks.     

Applicability of AE monitoring technique to evaluate structural integrity of fast breeder reactor piping component

The availability of acoustic emission technique for detecting and monitoring defects of piping components in fast breeder reactors has been studied in the FAET Committee of the Japan Welding Engineering Society sponsored by,the Power Reactor & Nuclear Fuel Development Corporation. The researches which extended over four years have covered a wide range of experiments and evaluations in order to ensure the usefulness of the acoustic emission technique as a monitoring tool of plant operation.     

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Amorphous polymer/crystalline polymer blends can be prepared via the simultaneous polymerization of polymethacrylate/polyurethane combinations. The relationship between higher order structures and fracture mechanisms in these blends must be uncovered to elucidate the source of the increased fracture toughness of such materials. The present work involves the production of blended polymethacrylate/polyurethane and assess the internal structures of these specimens using optical and electron microscopy. These observations reveal the presence of both spherulites and elastomeric phases. The spherulites consisting of the polyurethane and are several micrometers in diameter whereas the phase-separated polyurethane elastomeric domains are approximately 100 nm in size. Multiple cracks, crack bridging and plastic deformation around the precrack tips of loaded specimens are evidently responsible for the increased toughness of these blends. The former two phenomena are attributed to the presence of spherulites while the plastic deformation of the methacrylate matrix is ascribed to cavitation of the polyurethane elastomeric phases in response to loading.     

Possible Involvement of the Upregulation of ΔNp63 Expression Mediated by HER2-Activated Aryl Hydrocarbon Receptor in Mammosphere Maintenance

Cancer stem cells (CSCs) contribute to the drug resistance, recurrence, and metastasis of breast cancers. Recently, we demonstrated that HER2 overexpression increases mammosphere formation via the activation of aryl hydrocarbon receptor (AHR). In this study, the objective was to identify the mechanism underlying mammosphere maintenance mediated by HER2 signaling-activated AHR. We compared the chromatin structure of AHR-knockout (AHRKO) HER2-overexpressing MCF-7 (HER2-5) cells with that of wild-type HER2-5 cells; subsequently, we identified TP63, a stemness factor, as a potential target gene of AHR. ΔNp63 mRNA and protein levels were higher in HER2-5 cells than in HER2-5/AHRKO cells. Activation of HER2/HER3 signaling by heregulin treatment increased ΔNp63 mRNA levels, and its induction was decreased by AHR knockdown in HER2-5 cells. The results of the chromatin immunoprecipitation assay revealed an interaction between AHR and the intronic region of TP63, which encodes ΔNp63. A luciferase reporter gene assay with the intronic region of TP63 showed that AHR expression increased reporter activity. Collectively, our findings suggest that HER2-activated AHR upregulates ΔNp63 expression and that this signaling cascade is involved in CSC maintenance in HER2-expressing breast cancers.