A rapid dot-blot method for species identification of bloodstains

A very simple and rapid test for species identification is reported. Extracts of bloodstains were applied to a synthetic porous membrane and dried. The membrane was then quenched with glycine buffered saline containing BSA and Tween 20. A suspension of colloidal gold particles (GP) coated with rabbit antiserum to human IgG was poured onto, gently whirled and aspirated through the membrane. Spots from the human and monkey bloodstains became red, whereas those from other species of animals remained unstained. This test was completed within 3 to 4 min, and the antibody-coated GP reagent was prepared within 20 min using a very small quantity of antiserum. Cellulose acetate membranes of 0.45 microns or more in pore size were appropriate to this test.     

A case of eosinophilic pustular folliculitis (Ofuji's disease) induced by patch and challenge tests with indeloxazine hydrochloride

A 73-year-old male developed disseminated erythema over his entire body after exposure to indeloxazine hydrochloride, a cerebral activator. Patch testing with indeloxazine hydrochloride showed a positive reaction, and plaques, vesicles and pustules developed on the face after the patch test. These had the pathologic feature of eosinophilic pustular folliculitis (EPF, Ofuji's disease). A challenge test also provoked eruptions on the face, trunk, arms and legs, which were compatible with EPF. Moreover, both the patch and challenge tests with indeloxazine hydrochloride induced eosinophilia. This is the first report of drug allergy-induced EPF, where drug sensitivity induced an abnormal eosinophilic response mimicking EPF.     

ON THE IMPACT FATIGUE CRACK GROWTH BEHAVIOUR OF METALLIC MATERIALS

The impact fatigue crack growth characteristics of a low carbon steel and an aluminium alloy were studied. An impact fatigue testing machine of the Hopkinson bar type was used in these experiments to conduct a series of crack growth tests under simple impact stresses. The following characteristics of impact fatigue crack growth behaviour were revealed: (1) crack growth rate is higher in impact fatigue than in non-impact fatigue; (2) crack opening ratio in impact fatigue takes a higher value than in non-impact fatigue; (3) crack tip plastic zone size is smaller in impact fatigue than in non-impact fatigue.     

A numerical study of radiation heat transfer in sodium pool combustion and response surface modeling of luminous flame emissivity

A response surface model of the luminous flame emissivity of sodium pool fire has been proposed for use in safety analysis computer codes of a liquid metal fast reactor. The liquid sodium burns in air resulting in not only heat generation but also release of sodium oxide aerosols of sub-micron diameters. Aerosols levitating in air are radiative and they influence the allocation of combustion heat from the flame to atmospheric gas or sodium pool. The emissivity of the flame needs to be quantified, as it is one of user-specified parameters of the computer codes for the sodium fire analysis. The response surface model of the flame emissivity is developed based on numerical experiments on the physics of mass and heat transfer and behavior of the aerosol. Thermal-hydraulic equations have been solved coupled with aerosol dynamics and chemical reaction. Three influential variables on the emissivity are identified as pool temperature, gas temperature and oxygen molar fraction in the air. It has been found that the emissivity is calculated reasonably as a function of the three variables. The proposed response surface model can be easily employed in the sodium fire analysis codes because it is a simple quadratic expression. For the safety evaluation of the sodium fire, combined use is recommended of the proposed model and the lumped-mass zone model code.     

Use of a YAP1 overexpression cassette conferring specific resistance to cerulenin and cycloheximide as an efficient selectable marker in the yeast Saccharomyces cerevisiae.

Drug-resistance markers for yeast transformation are useful because they can be applied to strains without auxotrophic mutations. However, they are susceptible to technical difficulties, namely lower transformation efficiency and the appearance of drug-resistant mutants without the marker. To avoid these problems, we have constructed a phosphoglycerate kinase (PGK) promoter-driven YAP1 expression cassette, called PGKp-YAP1. Yeast cells containing PGKp-YAP1 were resistant to cycloheximide, a protein synthesis inhibitor, and also to cerulenin, a fatty acid synthesis inhibitor, but not to other drugs tested. The transformation efficiency of PGKp-YAP1 using cerulenin selection was comparable to that using a URA3 auxotrophic marker when low concentrations of cerulenin were used. Non-transformed drug-resistant colonies did appear on the low-concentration cerulenin plates. However, these non-transformed colonies could easily be identified, based on their cycloheximide sensitivity and/or their resistance to aureobasidin A to which the transformants were sensitive. Therefore, the dual drug resistance of PGKp-YAP1 could be used as an effective selection for PGKp-YAP1 recipient cells. The PGKp-YAP1 marker was used to disrupt the LYS2 gene and to transform an industrial yeast strain, indicating that this marker can be used for efficient and reliable gene manipulations in any Saccharomyces cerevisiae strain.     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

Adaptive control-based high-performance drive system implementation of traveling-wave-type ultrasonic motor

In recent years, ultrasonic motors (USM) as new actuators have attracted special interest. Several kinds of constructions and characteristics of USMs have been reported so far. Of these USMs, a traveling wave-type USM has many characteristics such as: high torque in the low-speed range, large holding torque based upon frictional force, flexible free forms, compactness in size and low magnetic noise. In practice, an inherent mechanical resonant frequency and a velocity amplitude of USM are changed largely according to operating temperature due to frictional drive, load disturbance torque, and applied voltage levels. Therefore, it is necessary to develop a new control system which solves these items and always supplies the required power with high efficiency and high performance in the practical applications. This paper proposes mainly a new sensorless high-performance control scheme of an inverter-fed ultrasonic motor, which is based on a control system technology with two feedbacks incorporating automatic resonant frequency tracking and constant velocity amplitude control strategies. This control system is realized in terms of a high-frequency chopper and a two-phase series/parallel resonant inverter. The experimental results are demonstrated and discussed compared with the theoretical ones.     

A demonstrative study for the wind and solar hybrid power system

In March 1995, a small scale wind and solar hybrid power system was installed at Ashikaga Institute of Technology. Until now, the authors have acquired the data of the output of the hybrid power plant along with wind speed, wind direction, and the solar radiation, in order to demonstrate a complementary relationship between solar energy and wind energy.After nine months operation of the system, the authors confirmed that there exists a complementary relationship between solar energy and wind energy. We also found, however, that the power output by wind does not have much prospect compared to that by solar cell especially in summer season in Ashikaga area.     

Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

Analysis of proliferative activity using anti-proliferating cell nuclear antigen antibody in gastric cancer tissue specimens obtained by endoscopic biopsy

BACKGROUND: Proliferative activities of tumors are thought to be prognostic features of malignant tumors, but their value as measured by proliferating cell nuclear antigen (PCNA) labeling remains unclear in gastric cancer. METHODS: PCNA labeling rates (LR) were quantified in 121 paraffin-embedded biopsy specimens from primary tumors by immunocytochemistry. RESULTS: Immunohistochemical analyses have demonstrated that PCNA presents an intense staining in the nuclei of tumor cells and mucous neck cells of gastric glands. The PCNA LR ranged from 12% to 79% (mean +/- standard deviation), and a significant correlation was found between bromodeoxyuridine labeling indices and PCNA LR: PCNA LR were closely associated with tumor size, serosal invasion, and nodal involvement. The patients with tumors with high PCNA LR (greater than 40%) were dead significantly earlier than were those with tumors with low PCNA LR: When the PCNA LR and all the clinicopathologic parameters were entered into a Cox regression model, PCNA LR emerged as an independent prognostic factor. CONCLUSION: These results indicate that PCNA LR may be a potentially useful prognostic factor for gastric cancer.