Gelatin manipulation of latent macropores formation in brushite cement

Macroporous brushite cement was prepared from a mixture of -tricalcium phosphate (-TCP) and monocalcium phosphate monohydrate (MCPM) using gelatin powder as a latent templates. In a setting reaction coexisting with gelatin, closed packed, open-pore structure with 100–200 m macropores are obtained after immersion of the set cement into PBS buffer (pH 7.4) at 37 °C for 1–4 weeks. The macroporous brushite cement has compressive strength of 15 MPa originally, which reducing to 5.5 MPa with macropore formation gradually in comparison to that of cancellous bone (5–10 MPa).     

Analytical Model for Redistribution Profile of Ion-Implanted Impurities During Solid-Phase Epitaxy

We evaluated the redistribution profiles of ion-implanted impurities during solid-phase epitaxy using Rutherford backscattering spectrometry (RBS). RBS data revealed that the As concentration changes only near the moving amorphous/crystal interface. We derived an analytical model for the redistribution profiles using a segregation coefficient m between amorphous and crystalline Si, introduced a parameter of reaction length l that is the distance where impurities were exchanged, and obtained good agreement with experimental data with an m value of 3 and an l value of 1 nm for As. Furthermore, we applied our model to P and B redistribution profiles and obtained good agreement with corresponding m value of 4 and l value of 1 nm for P and m value of 0.3 and l value of 1 nm for B     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

Phase-transition temperatures and piezoelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2Li1/2)TiO3-(Bi1/2K1/2)TiO3 lead-free ferroelectric ceramics.

The phase-transition temperatures and piezoelectric properties of x(Bi(1/2)Na(1/2))TiO3-y(Bi(1/2)Li(1/2))TiO3-z(Bi(1/2)K(1/2))TiO3 [x + y + z = 1] (abbreviated as BNLKT100(y)-100(z)) ceramics were investigated. These ceramics were prepared using a conventional ceramic fabrication process. The phase-transition temperatures such as depolarization temperatures T(d), rhombohedraltetragonal phase transition temperature T(R-T), and dielectric-maximum temperature T(m) were determined using electrical measurements such as dielectric and piezoelectric properties. The X-ray powder diffraction patterns of BNLKT100(y)-100(z)) show the morphotropic phase boundary (MPB) between rhombohedral and tetragonal at approximately z = 0.20, and the piezoelectric properties show the maximum at the MPB. The electromechanical coupling factor k(33), piezoelectric constant d(33) and T(d) of BNLKT4-20 and BNLKT8-20 were 0.603, 176 pC/N, and 171 degrees C, and 0.590, 190 pC/N, and 115 degrees C, respectively. In addition, the relationship between d33 and Td of tetragonal side and rhombohedral side for BNLKT4-100z and BNLKT8-100z were presented. Considering both high Td and high d(33), the tetragonal side of BNLKT4-100z is thought to be the superior composition. The d(33) and T(d) of BNLKT4-28 were 135 pC/N and 218 degrees C, respectively. Moreover, this study revealed that the variation of T(d) is related to the variation of lattice distortion such as rhombohedrality 90-alpha and tetragonality c/a.     

Fast and selective cell isolation from blood sample by microfiber fabric system with vacuum aspiration

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.     

海洋信息管理系统的设计与实现

为了解决海洋数据的多源异构问题,使用户对大量复杂的海洋数据进行有效管理,设计并实现一套海洋信息管理系统。首先介绍系统的体系结构,然后对各模块进行详细的阐述,并对海洋数据进行了详细的分析。针对海洋数据存在数据不一致、数据空缺和数据冗余等问题,使用基于累积变化量的时间序列异常检测方法,有效检测出海洋数据中的异常点,再对异常点进行修正,保证了海洋数据的质量,从而建立一套完善的海洋信息管理系统,使得海洋相关部门的业务流程更加科学化和规范化。     

Separation of Ru(III), Rh(III) and Pd(II) from nitric acid solutions using ion-exchange resins bearing carboxylic betaine

To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

Nonlinear control for rotational movement of cart-pendulum system using homoclinic orbit

In this paper, we deal with the control method for rotational movements of a pendulum using a separatrix. We design a controller that attains a homoclinic motion or a heteroclinic motion of the pendulum and the asymptotic stability of the cart by using a kind of forwarding control design. First, we derive a controller that converges to a homoclinic orbit via a Lyapunov function of the pendulum subsystem. Next, we give a nonlinear stabilizing controller via another Lyapunov function of the cart subsystem. Moreover, using the third Lyapunov function and adding a complementary control input, we guarantee that the pendulum converges to the homoclinic orbit and the cart is stabilized. Finally, the simulation and the experiment using the rapid controller prototyping system based on MATLAB/Simulink are performed to demonstrate the forward upward circling and the giant swing of the pendulum.     

Antibacterial action on pathogenic bacterial spore by green tea catechins

Antibacterial effects of catechins, the major green tea polyphenols, were studied using Clostridium and Bacillus spores. Incubation with crude catechins decreased the number of C botulinum and C butyricum spores but not B cereus spores. Furthermore, the effects of six catechin derivatives on spores were investigated. (−)‐Epicatechin gallate (ECg), (−)‐epigallocatechin (EGC), (−)‐epigallocatechin gallate (EGCg) and (+)‐gallocatechin gallate (GCg) were more effective in decreasing C botulinum and C butyricum spore numbers than (+)‐catechin (C) and (−)‐epicatechin (EC). The vegetative growth of C botulinum and B cereus was inhibited by crude extracts of the catechins. Specifically, purified GCg and EGCg inhibited the vegetative growth of C botulinum and B cereus. The inhibitory effect of ECg on B cereus was similar to that of GCg. However, toxin‐production by B cereus was not inhibited by catechin. Damage to the membrane of C butyricum spores by catechin derivatives was shown using fluorescent microscopy. This study shows that low concentrations of catechins, although requiring a long exposure time, inhibited the growth of bacterial spores. However, the effects of the purified derivatives of the catechins were not the same and GCg and EGCg were found to be the most potent. Spores that are generally resistant to many disinfectants were sensitive to catechins. Copyright © 2005 Society of Chemical Industry