Asymmetric addition of thiol to diene polymer in the presence of optically active amines as catalyst

The asymmetric addition reaction of thiolacetic acid or benzylmercaptan to diene polymer (natural rubber, cis- and trans-1,4-polyisoprene, _cis-1,4-polybutadiene, various styrenebutadiene copolymers and alternating acrylonitrile-butadiene copolymer) by optically active catalysts such as d-bornylamine ([α]d?45.2°), l-aspartic diethyl ester (?11.2°), l-aspartic dibutyl ester (?5.3°) were carried out in benzene at room temperature to 90°C. The optically active polymers were obtained from natural rubber and cis-1,4- and trans-1,4-polyisoprene, but were not obtained from cis-1,4-polybutadiene, styrene-butadiene copolymers, and butadiene-acrylonitrile copolymer. The [α]²⁵_D value of optically active derivatives was ?0.1° ～ ?1.0° (in benzene), and the optical rotatory dispersion curves were found to fit the simple Drude equation.     

Development of an improved calibration method for the LFB ultrasonic material characterization system

We investigated standard specimens for accurately calibrating the line-focus-beam ultrasonic material characterization (LFB-UMC) system without system dependencies. We evaluated several types of lithium tantalate (LiTaO3) substrates using two LFB-UMC systems with different device/system characteristics to measure and calibrate the propagation characteristics of the leaky surface acoustic waves (LSAWs), and analyzed the variations between the calibrated results. We concluded from this analysis that, by selecting materials with the cut surfaces and propagation directions of standard specimens that are identical to the objects to be calibrated, calibration errors resulting from different performance characteristics between the two systems could be nearly eliminated. Also, analytical errors caused by the effects of spectra with two close peaks (another propagation wave mode), one of the most common problems of characterization in the past, could be eliminated at the same time by this method.     

Wind-flow measurement over the Subaru Telescope

Wind flows over the 8.2-m Subaru Telescope at Mauna Kea in Hawaii were analyzed with a correlation method. Three or four wind flows were detected from our measurements. Spatial and temporal resolution of the wind-flow analysis across the 8.2 m pupil were investigated experimentally. A three-dimensional spatiotemporal-frequency analysis was also applied to the wind-flow data.     

Mutual tests using immunity-based diagnostic mobile agents in distributed intrusion detection systems

Distributed intrusion detection systems have several advantages over centralized systems, such as scalability, adaptability, and fault tolerance. A current research topic in distributed systems is self-monitoring to identify corrupted intrusion detection systems. One way of self-monitoring is for intrusion detection systems to check each other. As we describe herein, this can be done by mobile agents using an immunity-based diagnostic method modeled on idiotypic network theory. In simulations, the credibility of normal intrusion detection systems remained near 1, while it fell to about 0 for corrupted intrusion detection systems, thus enabling identification of the latter. We also confirmed what effects some parameters have on the diagnostic capability.This work was presented, in part, at the 8th International Symposium on Artificial Life and Robotics, Oita, Japan, January 24–26, 2003     

Analytical Model for Redistribution Profile of Ion-Implanted Impurities During Solid-Phase Epitaxy

We evaluated the redistribution profiles of ion-implanted impurities during solid-phase epitaxy using Rutherford backscattering spectrometry (RBS). RBS data revealed that the As concentration changes only near the moving amorphous/crystal interface. We derived an analytical model for the redistribution profiles using a segregation coefficient m between amorphous and crystalline Si, introduced a parameter of reaction length l that is the distance where impurities were exchanged, and obtained good agreement with experimental data with an m value of 3 and an l value of 1 nm for As. Furthermore, we applied our model to P and B redistribution profiles and obtained good agreement with corresponding m value of 4 and l value of 1 nm for P and m value of 0.3 and l value of 1 nm for B     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

Fast and selective cell isolation from blood sample by microfiber fabric system with vacuum aspiration

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.     

海洋信息管理系统的设计与实现

为了解决海洋数据的多源异构问题,使用户对大量复杂的海洋数据进行有效管理,设计并实现一套海洋信息管理系统。首先介绍系统的体系结构,然后对各模块进行详细的阐述,并对海洋数据进行了详细的分析。针对海洋数据存在数据不一致、数据空缺和数据冗余等问题,使用基于累积变化量的时间序列异常检测方法,有效检测出海洋数据中的异常点,再对异常点进行修正,保证了海洋数据的质量,从而建立一套完善的海洋信息管理系统,使得海洋相关部门的业务流程更加科学化和规范化。     

Hydrodechlorination of 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113) over supported ruthenium and other noble metal catalysts

The hydrodechlorination of CCl₂F–CClF₂ (CFC-113) was studied using silica- and activated carbon-supported Ru, Rh, Pd, and Pt catalysts. The activity of the catalysts changed with time-on-stream. Ru was most stable among the four noble metals and gave a simple product distribution yielding CClF=CF₂ (CFC-1113) and CHClF–CClF₂ (HCFC-123a) as main products. Over silica-supported Ru, CFC-1113 yield decreased gradually with time-on-stream but HCFC-123a yield did not change throughout the reaction, suggesting that these products were formed on different sites of Ru. XRD studies and temperature-programmed reduction of the spent catalyst revealed that the deactivation was caused by halogen-containing carbonaceous species accumulated on the Ru surface during the reaction. The carbonaceous species seemed to be formed on the active site for CFC-1113 formation. Because CFC-1113 selectivity was higher over the catalyst having higher Ru dispersion, it was assumed that the hydrodechlorination of CFC-113 is structure-sensitive and CFC-1113 formation is promoted by Ru having highly unsaturated coordination sphere.