基于红外遥感信息的煤矿车辆 异常行为检测研究

为了提升煤矿车辆异常行为检测水平,设计了基于红外遥感信息的煤矿车辆异常行为检测方法。该方法引入清晰度权重以及拉伸系数实现红外遥感图像中目标煤矿车辆部位的局部增强,利用均值漂移算法跟踪增强后的红外遥感图像中目标煤矿车辆,依据煤矿车辆跟踪结果提取煤矿车辆运动方向、运动速度以及运动方向3项异常行为检测参数,采用加权融合方法处理煤矿车辆异常行为检测参数的状态函数,融合结果高于所设定阈值时,煤矿车辆存在异常行为,否则煤矿车辆为正常行驶状态。实验结果表明,该方法可利用煤矿车辆位置、车辆行驶速度以及车辆方向变化检测煤矿车辆异常行为,具有较高的应用性。     

Method for minimum‐loss reconfiguration of distribution system by tabu search

This paper proposes a loss minimum reconfiguration method by tabu search for an open‐loop radial distribution system with distributed generators. The problem is to find the optimal normal open sectionalizing switch positions which minimize the total distribution line losses subjected to the line/transformer capacity constraints and voltage constraint. Generally, the problem is mathematically formulated as a complex combinatorial optimization problem or mixed integer programming problem, and is solved by using mathematical programming method, heuristic algorithm, intelligent method, and so on. However, a satisfactory algorithm for power companies has not yet been attained in both computational burden and solution accuracy. Thus, in this paper, the authors propose a method to solve the above problem by using tabu search (TS). Reverse power flow caused by distributed generators can be included in the solution algorithm. TS is one of the meta‐heuristic algorithms, and sometimes has been evaluated to be better than genetic algorithm (GA) or simulated annealing (SA) from viewpoints of both computational speed and solution accuracy. In order to evaluate the validity and efficiency of the algorithm, several numerical examples are shown in this paper. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(2): 18–25, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20086     

Effects of Samarium Oxide Addition on the Phase Composition, Microstructure, and Electrical Resistivity of Aluminum Nitride Ceramics

The phase composition, microstructure, and electrical resistivity of hot-pressed AlN ceramics with 0–4.8 wt% Sm₂O₃ additive were investigated. The phase composition was approximately consistent with that estimated from the Sm₂O₃–Al₂O₃ phase diagram using the amount of added Sm₂O₃ and oxygen content of the AlN raw material. When sintered at more than 1800°C, the AlN ceramics with 1.0–2.9 wt% Sm₂O₃ additive contained an Sm-β-alumina phase wetting the grain boundaries, and their electrical resistivity considerably decreased to 10¹⁰–10¹²Ω·cm. This resistivity decrease was caused by the continuity of the Sm-β-alumina phase with a resistivity lower than that of bulk AlN.     

The reaction of polypropylene with maleic anhydride

An addition reaction of maleic anhydride with polypropylene takes place in the presence of radical reagents or sunlight. The initial rate of the reaction was proportional to the concentration of polypropylene and maleic anhydride, and one-half power of the concentration of the radical reagents. The increase in the temperature from 80 to 120°C increased the rate of the reaction and di-cumyl peroxide was effective as a radical reagent for this reaction. Ionic crosslinked rubber-like polymers were obtained from the reaction of maleic polypropylene with some alkali metal compounds. They showed the characteristic absorption band due to ? COO^? in their infrared spectra.     

Removal of phenol and phosphoric acid from wastewater by microfiltration carbon membranes

Microfiltration carbon membranes were developed to cope with the wastewater containing phenol and phosphoric acid. The structure of carbon membranes was characterized by scanning electron microscope, x-ray diffraction, bubble pressure method and specific surface area analysis. The separation efficiency of carbon membranes was investigated by varying the operation factors, including feed concentration, running time, and pressure. Results have shown that the carbon membranes are abundant in porous structure with the porosity of 42%, along with a narrow pore size distribution centering at 0.18?µm. Within the scope of the study, the highest removal rates reach to 81.9% for phenol and 55.3% for phosphoric acid from wastewater, respectively.     

Posture Control for Personal Mobility Robot Using Feedback Compensation with Unstable Pole

This paper presents a novel posture control approach using feedback compensation with an unstable pole. For a narrow and small personal mobility robot (PMR), this is needed in order to control its posture for achieving quick turning and high acceleration. However, in the conventional control approach that uses the posture angle as a controlled variable, the zero moment point (ZMP) does not settle to the desired point in the following cases: an unknown disturbance force given to the PMR, a fluctuation in the center of gravity of the PMR, and a change in the conditions between the tires and the road surface. In this paper, a novel control method using feedback compensation with an unstable pole is proposed to achieve the desired ZMP in the steady state. The proposed controller changes the control input for the actuator of posture control to zero in order to achieve the desired posture angle. The effectiveness of the proposed approach is verified through experiments using a prototype of the PMR.     

Predicting the Life Span of Dies Used for Soft Magnetic Core Motors

This paper describes a method of predicting the life span of the dies used in motor manufacture from soft magnetic composites (SMCs). In the present study, a clawtooth motor was used. The method involves performing a stress analysis of a die followed by fatigue testing of test pieces. In the analysis, the SMC was assumed to be in powder form and its yield function was derived by a simple method. In addition to the analysis, we describe a simpler and more effective method in which the properties of the SMC are treated as boundary conditions. In the fatigue tests, we used test pieces that simulated the shape and construction material of the die. To predict the life span of the die, we evaluate the SN diagram, which represents the relationship between the maximum stress and fatigue life with respect to the stress generated in the die. The life expectancy of a new die, which is about 100 cycles of use, is found to agree substantially with its actual life. Furthermore, we explain how to extend the life span of a die to the targeted life span, namely, more than 200,000 cycles of use, by changing its shape to reduce stress.     

Construction of simulation model for spray flash desalination system

This paper describes a simulation model for a spray flash desalination system which makes fresh water from sea water by using the temperature difference between warm surface sea water and cool deep sea water. The spray flash desalination system can be modeled by using the energy conservation law and the mass conservation law. Simulation results of the model are compared with the experimental results and show the accuracy of the proposed simulation model. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(4): 9–17, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20975     

应对脱离配电网情况的单三相多微网组合分析及切换控制

考虑单相及三相微网两者在地域上接入较为相近,互联而形成单三相多微网系统。由于其复杂的运行方式,亟待解决如何实现多微网灵活无缝切换的问题。介绍了单三相多微网系统拓扑结构;当多微网系统为应对脱离配电网情况时,即常规主动并转离,通过互联方案预筛选得到初始方案后,基于模糊多目标决策得到多微网互联方案;通过给定的互联方案目标进行系统状态平滑切换。所提策略经算例验证可行,为多微网切换控制技术提供建议性方案。     

Interactive segmentation of the cerebral lobes with fuzzy inference in 3T MR images.

Measurement of volume and surface area of the frontal, parietal, temporal and occipital lobes from magnetic resonance (MR) images shows promise as a method for use in diagnosis of dementia. This article presents a novel computer-aided system for automatically segmenting the cerebral lobes from 3T human brain MR images. Until now, the anatomical definition of cerebral lobes on the cerebral cortex is somewhat vague for use in automatic delineation of boundary lines, and there is no definition of cerebral lobes in the interior of the cerebrum. Therefore, we have developed a new method for defining cerebral lobes on the cerebral cortex and in the interior of the cerebrum. The proposed method determines the boundaries between the lobes by deforming initial surfaces. The initial surfaces are automatically determined based on user-given landmarks. They are smoothed and deformed so that the deforming boundaries run along the hourglass portion of the three-dimensional shape of the cerebrum with fuzzy rule-based active contour and surface models. The cerebrum is divided into the cerebral lobes according to the boundaries determined using this method. The reproducibility of our system with a given subject was assessed by examining the variability of volume and surface area in three healthy subjects, with measurements performed by three beginners and one expert user. The experimental results show that our system segments the cerebral lobes with high reproducibility.