Pulsed field loss characteristics of the Japanese test coil for the large coil task

This paper describes some results of an analytical calculation and the measurements of a pulsed field loss on the Japanese LCT conductor. The conductor, whose aspect ratio is around 2.5, is wound edge wise to reduce the pulsed field loss. The Japanese LCT coil, with the conductor thus designed, was evaluated to have a pulsed field loss of about 19W. This includes the loss of the helium vessel under the normal LCT test with a pulsed field of 0 to 0.14T. In addition, the loss measurement has been carried out up to 25 T/s. Measured results on the relation between the loss of a single strand and that of a whole strand pack well supports the validity of the loss analysis which includes a newly arranged set of analytical equations.     

Acidophilic xylanase from Aureobasidium pullulans: efficient expression and secretion in Pichia pastoris and mutational analysis

A yeast-like fungus Aureobasidium pullulans var. melanigenum strain ATCC 20524 produces an extracellular acidophilic endo-1,4-beta-xylanase with an optimum pH of 2.0 [Ohta et al., J. Biosci. Bioeng., 92, 262-270 (2001)]. The xynI cDNA encoding the precursor protein (XynI) was expressed in the methylotrophic yeast Pichia pastoris under the control of the alcohol oxidase I gene promoter. The 34 amino acid prepro-signal peptide of the A. pullulans XynI directed the efficient secretion of 178 mg of active xylanase per liter of the culture medium. The secretion level of the xylanase with its own signal peptide was comparable to that of the mature protein fused to the prepro leader from Saccharomyces cerevisiae alpha-mating factor and twofold higher than that of the mature protein fused to the pre-type signal peptide from P. pastoris acid phosphatase. The N-terminal amino acid sequence and the apparent M(r) of 24 kDa of the secreted recombinant protein indicated the native-like processing of the A. pullulans XynI signal sequence in P. pastoris. The three-dimensional model and mutational analysis of the xynI gene product showed that Asp-73 and Glu-157 residues located at the upper and lower edges of the active site cleft, respectively, play a significant role in its low pH optimum.     

Utilization of sludge in building material.

Several thermal solidification processes have been developed mainly in Japan. They are lightweight aggregates, brick, interlocking tile, char, and slag. A full-scale plant of them has been successfully operated for more than 10 years. The quality of the end products is better than the traditional ones. They are all substitutive to existing ones. The Japanese experience proves that all the processes are technically feasible, but not economically. Their manufacturing cost is always higher than market price. In addition, they consume large amounts of energy. However, if they are identified for a process of sludge disposal, all of them are worth considering for a big city where there is no place for the sludge to go. The end products can be reused inside the city. A new alternative is "Portland cement". A Portland cement manufacturer accepts sewage sludge, if being paid some amount of money. An average payment is US$100 each 1,000 kg of ash or sludge cake. The Portland cement manufacturer accepts either cake or ash at the same price. It is about 50 to 30% of the energy cost of thermal solidification. The question is which is the better, dewatered cake or incinerated ash, for the Portland cement application. The answer is "it depends on the distance between the sewage plant and the Portland cement plant."     

Sonochemical degradation of chlorinated hydrocarbons using a batch and continuous flow system

The sonochemical degradation of chlorinated hydrocarbons such as 1,1,1-trichloroethane, trichloroethylene and tetrachloroethylene in aqueous solution was carried out in the batch and continuous flow systems at an ultrasonic frequency of 100kHz under an air atmosphere. In the batch experiment, the rate of degradation follows the order 1,1,1-trichloroethane>tetrachloroethylene>trichloroethylene, and the chlorinated hydrocarbon were readily degraded by ultrasonic irradiation. The experiments in the continuous flow system were performed in the range of volumetric flow rate from 7 to 30 x 10(-3)lmin(-1). The conversion of the chlorinated hydrocarbons at a steady-state of reactor depended on the volumetric flow rate. The yield of Cl(-) (as a measurement of mineralization of chlorinated hydrocarbons) was 70-90% of the chlorine atoms in the parent chlorinated hydrocarbon molecules. From the viewpoint of the scale-up process, the sonochemical degradation of trichloroethylene was simulated in a three stage reactor, and the conversion (>99%) in a third stage reactor was showed the good results that can be satisfied a desired water quality standard.     

Lipid analog with 2-nitrophenol trigger designed for liposome fusion at physiological pH

A novel lipid analog with two long alkyl (C₁₆) chains, an aspartate skeleton, a connecting alkyl (C₈) chain, and 2-nitrophenol trigger group is synthesized by an efficient synthetic route, which can induce liposome fusion at physiological pH.     

Eleven phthalate esters and di(2-ethylhexyl) adipate in oneweek duplicate diet samples obtained from hospitals and their estimated daily intake

Plasticizers in duplicate diet samples obtained over 1 week were analysed in order to estimate daily intake. The phthalate esters were as follows: diethyl, dipropyl, dibutyl, dipentyl, dihexyl, butylbenzyl, dicyclohexyl, di(2-ethylhexyl), dioctyl, diisooctyl (mixture of isomers) and diisononyl (mixture). Di(2-ethylhexyl) adipate was also determined. Homogenized samples of composite meals were extracted with acetonitrile, lipids were removed by extraction into n-hexane and the acetonitrile layer was cleaned using FlorisilR and R Bondesil PSA dual layer column. Phthalates were determined by GC/MS (SIM). Phthalate recovery from the fortified food mixture by this method was 62.5-140.8%. Quality assurance as assessed by three laboratories indicated coefficient of variance in the levels of detected phthalates in same lot samples as below 10%. Detection limits were 0.1-23ng/g for each phthalate. One-week duplicate diet samples provided by three hospitals in three remote prefectures of Japan were analysed as individual meals. In all 63 samples, DEHP was present at the highest level among all phthalates in the range 10-4400ng/g. The intake of plasticizers estimated from all samples was 519 µ g DEHP/day, 86 µ g DEHA/day, 65 µ g DINP/day, and 4.7 µ g BBP/day. Calculated DEHP in 2-day samples out of 21 days exceeded EU TDI for a person of 50kg body weight (1850 µ g per day). Disposable PVC gloves used during the preparation of meals were suspected as the source of the high DEHP content. One-day intake of the other phthalates and DEHA was below 7% of TDI in all cases. High concentrations of DEHP (5990ng/g) was found in baby food used in quality assurance work. The source of contamination was the PVC-tube used during production and was effectively reduced by replacing the tube by one made of stainless steel.     

Nanosecond and femtosecond mass spectroscopic analysis of a molecular beam produced by the spray-jet technique

The spray-jet molecular beam apparatus enabled us to produce a molecular beam of non-volatile molecules under high vacuum from a sprayed mist of sample solutions. The apparatus has been used in spectroscopic studies and as a means of molecular beam deposition. We analyzed the molecular beam, consisting of non-volatile, solvent, and carrier-gas molecules, by using femtosecond- and nanosecond- laser mass spectroscopy. The information thus obtained provided insight into the molecular beam produced by the spray-jet technique.