A service provisioning system for distributed personalization with private data protection

Personalized services can provide significant user benefits since they adapt their behavior to better support the user. Personalized services use a variety of data related to the user to decide their behavior. Thus personalized service needs a provisioning system that can collect the data that impacts service behavior and allows selection of the most appropriate service. However, in the coming ubiquitous environment, some data necessary for determining service behavior might be unavailable due to two possible reasons. One is that the data does not exit. The other is that the data exists but cannot be accessed. For example, users do not want to disclose their personal information, and service providers do not also want to expose data related to their knowhow in services. This paper describes a new service provisioning system for distributed personalization with private data protection. Specifically, the system selects applicable services by assessing how well each candidate service behaves when some data is missing. It then executes those selected services while hiding the users’ and providers’ private data in a distributed manner. We first summarize the requirements for a personalized service system, and introduce our fundamental policies for the system. The two main components of our system are then described in detail. One component is a service assessment mechanism that can judge if a service can work without data that can be used for adaptation. The second component is a service execution mechanism that can utilize private data while still ensuring privacy. This component divides service logic and executes divided logic where necessary data is available. The paper finally describes our prototype implementation and its performance evaluation results.     

Possible 3He Boltzmann Gas Formed on Three-Dimensional Nanopores Preplated with 4He

We have measured the heat capacity of ³He adsorbed on three-dimensionally connected nanopores, 2.7 nm in diameter, preplated with about 1.3 atomic layers of ⁴He. At low coverages of ³He, the ³He heat capacity is roughly constant at the measured temperatures between 0.1 and 1 K. Its molar heat capacity is on the order of the gas constant R, between 1.1R and 1.8R. This suggests a Boltzmann gas state of the adsorbed ³He. At high coverages, the heat capacity is likely approaching linear in T at low temperatures, which suggests a degenerate state at further lower temperatures.     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Capillary rise properties of porous mullite ceramics prepared by an extrusion method with various diameters of fiber pore formers

Porous mullite ceramics with unidirectionally oriented pores were prepared by an extrusion method using rayon fibers as the pore formers. Rayon fibers of 8.1, 9.6, 16.8, and 37.6 μm in diameter were used as the pore formers and were kneaded with alumina powder, kaolin clay, China earthen clay, and water to form pastes. These pastes were extruded into cylindrical tubes, dried, and fired at 1500 °C for 4 h. The apparent porosities ranged from 45.7 to 48.2 %. The pore size distributions showed a sharp peak at 9.4, 10.0, 15.6, and 30 μm with increasing fiber diameters. The height of the capillary rise was 1780, 1670, 1320, and 950 mm with increasing fiber diameter. The maximum capillary rise is much higher than previously reported. The contact angle and effective pore radius that determine the capillary rise ability were calculated by fitting the capillary rise curves using the Fries and Dreyer’s equation.     

Synthesis and Thermal Characterization of Novel Poly(tetramethylsilanthrylenesiloxane) and Poly(tetramethylsilphenanthrylenesiloxane) Derivatives

Summary Novel poly(tetramethylsilarylenesiloxane) derivatives, i.e. poly(tetramethyl-2,6-silanthrylenesiloxane) (P1), poly(tetramethyl-9,10-silanthrylenesiloxane) (P2), and poly(tetramethyl-1,8-silphenanthrylenesiloxane) (P3), were synthesized by polycondensation of novel disilanol monomers, i.e. 2,6-bis(dimethylhydroxysilyl)-anthracene (M1), 9,10-bis(dimethylhydroxysilyl)anthracene (M2), and 1,8-bis(dimethylhydroxysilyl)phenanthrene (M3), respectively. P1 and P3 were soluble in common organic solvents, such as benzene, toluene, chloroform, dichloromethane, tetrahydrofuran, etc. whereas P2 was almost insoluble in common organic solvents. It was revealed that P1 and P3 were amorphous and that P2 exhibited the crystallinity, as deduced from differential scanning calorimetry (DSC) and X-ray diffraction measurements. The glass transition temperatures (T_g’s) of P1 (118 °C) and P3 (100 °C) were much higher than that of poly(tetramethyl-1,4-silphenylenesiloxane). The temperature at 5% weight loss (T_d5) of P3 was 500 °C, which was higher than those of P1 and P2, and comparable to that of poly(tetramethyl-1,4-silphenylenesiloxane). It would be speculated that the thermostability of the series of poly(tetramethyl-silarylenesiloxane) derivatives is dependent on the stability of arylene moieties incorporated.     

The contradiction in the theory of desorption phenomena: A new interpretation of the classical concept for its avoidance

Most chemical engineers presently accept that the mass transfer rate in desorption from the solid to the gas phase or from the liquid to the gas phase is accelerated with increasing temperature in the liquid or the solid phase, or increasing partial pressure of inert gas in the gas phase, and/or decreasing total system pressure in the gas phase. Nevertheless, many reports about such mass transfer are still based on the former concept, which completely contradicts the actual phenomena mentioned above. Here, we discuss the contradiction and suggest a way of resolving it in terms of diffusion theory.     

Chemical heat-pump system working at exhaust temperatures of high-temperature-gas-cooled reactor

A chemical heat-pump system using two hydrogen-absorbing alloys is proposed to utilize heat exhausted from a high-temperature source such as high-temperature-gas-cooled reactor, HTGR, which is designed to produce H₂ more efficiently. The overall system proposed here consists of HTGR, He gas turbines, chemical heat pumps and reaction vessels corresponding to the three-step decomposition reactions comprising the I–S process. A fundamental research is performed experimentally on heat generation in a single bed packed with a hydrogen-absorbing alloy that works at the H₂ production temperature. The hydrogen-absorbing alloy of Zr(V_1−xFe_x)₂ is selected as a material that has a proper plateau pressure for the heat-pump system operated between the input and output temperatures of HTGR. Temperature jump due to heat generated when the alloy absorbs H₂ proves that the alloy–H₂ system can heat up the exhaust gas even at 600 °C without any external mechanical force.     

Acceleration of calcium phosphate formation on bioactive PMMA-based bone cement by controlling spatial design

Polymethylmethacrylate (PMMA)-based bone cement is widely used for the fixation of artificial joints. However, it is not considered a bioactive material because it lacks the ability to induce a direct bond with bone. In order to improve the long-term stability of cemented fixations, the development of bioactive bone cements is desirable. An essential requirement of a bioactive material includes the induction of bone-like apatite on its surface within the in vivo environment. Previously, we prepared bioactive PMMA-based bone cements by a modification with water-soluble calcium salts and alkoxysilane. Because spatial design may enhance apatite formation on bioactive material surfaces in vivo, we aimed to evaluate the effect of spatial design on apatite formation on modified PMMA-based bone cements in simulated body fluid (SBF). We found that an appropriate spatial design shortened the induction period for the apatite deposition on the modified bone cements. It is expected that osteoconduction would be enhanced in spontaneously created gap between the cement and the host bone leading to tight integration.     

Application of induction motor speed sensorless vector control to railway vehicle traction

Pulse generators (PGs) are equipped to detect the rotor frequency of induction traction motors for torque control in railway vehicle traction field. Eliminating PGs is preferable from the viewpoints of increasing the reliability of the traction system, reduction of both the initial and maintenance cost, and downsizing induction traction motors. Expecting those advantages, we have been studying the application of a sensorless control method to induction traction motor control. Prior to some reports of studies and tests to apply speed sensorless strategy to railway vehicle traction we launched ideas to apply the speed sensorless control strategy and results of the studies and tests. In this paper, we present the novel control method for railway vehicle traction and some results of theoretical study and tests. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 69–77, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20273     

Removal ability of immunoglobulins in plasma exchange and double-filtration plasmapheresis

The value of plasma exchange (PE) in Guillain-Barré syndrome (GBS) is well established. Although no controlled trial has reported on the effect of double-filtration plasmapheresis(DFPP), neurologist in Japan often treat the GBS patients using DFPP. The therapeutic effect probably relates to the removal of circulating factors, which are immunoglobulins. We compared removal ability of immunoglobulins between PE and DFPP. IgG was less effectively removed by DFPP than by PE. We suggest that PE is more beneficial treatment for GBS than DFPP.