Extracellular Environment-Controlled Angiogenesis,and Potential Application for Peripheral Nerve Regeneration

Endothelial cells acquire different phenotypes to establish functional vascular networks. Vascular endothelial growth factor (VEGF) signaling induces endothelial proliferation, migration, and survival to regulate vascular development, which leads to the construction of a vascular plexuses with a regular morphology. The spatiotemporal localization of angiogenic factors and the extracellular matrix play fundamental roles in ensuring the proper regulation of angiogenesis. This review article highlights how and what kinds of extracellular environmental molecules regulate angiogenesis. Close interactions between the vascular and neural systems involve shared molecular mechanisms to coordinate developmental and regenerative processes. This review article focuses on current knowledge about the roles of angiogenesis in peripheral nerve regeneration and the latest therapeutic strategies for the treatment of peripheral nerve injury.     

Diamond-like carbon thin film with controlled zeta potential for medical material application

With the purpose of applying diamond-like carbon (DLC) thin films as a biocompatible material, we experimented with introducing functional groups such as amino and carboxyl groups to the surface of DLC thin films by plasma surface treatment. From the results, it was found that the contact angle values of the DLC thin films surface were decreased with increasing in the OCO bonded network on the surface. Measurement of the zeta potential when the amounts of the functional groups were varied showed that this successfully varied the zeta potential over the wide range of − 48 mV to + 12 mV. It was found that when carboxyl groups are introduced by O₂ plasma modification of the DLC thin films surface, the zeta potential was lower than that of untreated DLC thin films sample. It was also found that amino groups can be introduced to the DLC thin films surface by NH₃ plasma treatment, the zeta potential was higher than that of untreated DLC thin films sample. This means that zeta potential of the DLC thin films can also be controlled by controlling these two functional groups. Therefore, we have succeeded in developing a multifunctional DLC thin films that does not use polymers and is suitable as a biocompatible material.     

Effects of amino acid replacements around the reactive site of chicken ovomucoid domain 3 on the inhibitory activity toward chymotrypsin and trypsin

We have previously shown that replacing the P1-site residue(Ala) of chicken ovomucoid domain 3 (OMCHI3) with a Met or Lysresults in the acquisition of inhibitory activity toward chymotrypsinor trypsin, respectively. However, the inhibitory activitiesthus induced are not strong. In the present study, we introducedadditional amino acid replacements around the reactive siteto try to make the P1-site mutants more effective inhibitorsof chymotrypsin or trypsin. The amino acid replacement AspTyrat the P2' site of OMCHI3(P1Met) resulted in conversion to a35000-fold more effective inhibitor of chymotrypsin with aninhibitor constant (K_i) of 1.17x10^–11 M. The K_i valueof OMCHI3(P1Met, P2'Ala) indicated that the effect on the interactionwith chymotrypsin of removing a negative charge from the P2'site was greater than that of introducing an aromatic ring.Similarly, enhanced inhibition of trypsin was observed whenthe AspTyr replacement was introduced into the P2' site of OMCHI3(P1Lys).Two additional replacements, AspAla at the P4 site and ArgAlaat the P3' site, made the mutant a more effective inhibitorof trypsin with a K_i value of 1.44x10^–9 M. By contrast,ArgAla replacement at the P3' site of OMCHI3(P1Met, P2'Tyr)resulted in a greatly reduced inhibition of chymotrypsin, andAspAla replacement at the P4 site produced only a small changewhen compared with a natural variant of OMCHI3. These resultsclearly indicate that not only the P1-site residue but alsothe characteristics, particularly the electrostatic properties,of the amino acid residues around the reactive site of the proteaseinhibitor determine the strength of its interactions with proteases.Furthermore, amino acids with different characteristics arerequired around the reactive site for strong inhibition of chymotrypsinand trypsin.     

Spline interpolation with optimal frequency spectrum for vibration avoidance

A major source of inaccuracy in CNC machines is unwanted vibrations induced by the frequency spectra of reference motion trajectory. This paper presents a novel approach where instead of filtering techniques, axis motion commands are generated with optimal frequency spectra in the first place. Tangential feedrate profile is defined as parametric spline, and its frequency spectrum is optimized with respect to structural dynamics of the machine. The optimization problem is solved efficiently using Quadratic Programming. Experimental results confirm that proposed technique can greatly improve surface finish during machining spline tool-paths without sacrificing from cycle time and contouring performance.     

Influence of heating and laser irradiation on the Raman D band in single-wall carbon nanotubes

Fine structure of the Raman D band in single-wall carbon nanotubes (SWNTs) was investigated by heating and laser irradiation. It is shown that the D band is composed of three components at ～ 1313, 1340, and 1355 cm^? 1, denoted by D₁, D₂, and D₃, respectively. The D₁ and D₂ intensities significantly increase with laser irradiation in air and vacuum, respectively. The D₃ intensity drastically increases with heating in air. From these results, it is suggested that the fine structure of the D band is attributed to different kinds of defects introduced in SWNTs.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.     

Effect of welding time on fatigue properties of friction stir spot welds of Al to carbon fibre-reinforced plastic

ABSTRACT

One way of addressing environmental problems is to increase the use of light-weight materials in automobiles, such as the multi-material structure, which improves fuel economy and reduces pollution. However, it is necessary to develop a welding technique to join carbon fibre-reinforced plastic to metals to achieve a multi-material structure. So, this paper aims to shorten the welding time and to clarify the fatigue fracture mechanism of shear type friction stir spot welding joint between aluminium alloy and CFRP experimentally and analytically. As a result, the static and fatigue strength of the joint improved as the welding time increased due to the increase of total joint area to increased resin melting.     

Study of prevention of solidification cracking in Al‐Mg‐Si alloy laser welds. CO2 laser welding of Al‐Mg‐Si alloys (1st report)

The choice of weld bead size in the case of welded cruciform joints can be problematic, especially when the sheets forming the joint are of differing thickness. Technological standards generally recommend a weld bead thickness less than the minimum thickness of the sheets to be joined, whereas structural standards do not envisage any dependency between joint static and fatigue strength and weld bead dimensions, unless these are so reduced as to lead to failure starting and propagating in the weld bead itself rather than the base metal plates. The scope of this study is the theoretical and experimental analysis of the change in fatigue strength with varying weld bead thickness and minimum welded plate thickness.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.