TEM,XPS and SIMS Analyzes on Grain Boundary of Lanthanum Chromites

The morphological characteristics, chromium valence state, and cation transport in the vicinity of grain boundary in La_1-xCa_xCrO₃ were investigated by using TEM/EDS, XPS and SIMS techniques. The width of grain boundary was around 1 nm where anomalous enrichment of calcium was observed. Higher valence state of chromium such as Cr⁶⁺(d⁰) was detected in the grain boundaries whereas Cr³⁺(d³) and Cr⁴⁺(d²) were dominant in the bulk. Very fast interdiffusion of alkaline earths was observed in the Sr²⁺-La_0.75Ca_0.25CrO₃ system. All observed phenomena were correlated by assuming the A-site vacancy which may be induced by the formation of Cr⁶⁺ at grain boundaries.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.     

Estimation of forest area near deserts — production of Global Bio-Methanol from solar energy

This paper proposes a new synthesis method for methanol as a future alternative fuel, by the combination of carbon supplied from wood and hydrogen supplied from the electrolysis of water using a solar power generation system in the desert. In the developed countries, more than half of the potential forest area has already been converted into other land uses, while existing forests are well organized and available for wood production. In the developing countries, potential forest sites are expected to be available for wood production, even though they are presently grasslands or secondary forests, while natural tropical forests will not be allowed to be converted into artificial forests. The area available for plantations within 500 km distant from deserts was estimated to be 65 Mha in the world, except for the mountain areas. Biomass production from these sites will be converted annually into 980 Mt methanol with hydrogen from the deserts. This amount is equal to 34% of the world's fuel consumption by vehicles.     

Studies on Loss Aging in Submarine Coaxial Cable During Storage

Attenuation loss change in submarine coaxial cables during 4 years of storage has been measured. Attenuation loss is shown to increase for one year after manufacturing. Then, loss is also shown to increase during summer (May to October) and to stay constant or to decrease during winter (November to April of the next year). This work concentrates on the causes and an estimation method of loss aging. The first part of the paper covers experimental results on the cable aging phenomenon. The second part discusses various factors affecting loss aging, and shows that fretting corrosion on the outer conductor tape will be a main factor. The third part describes an estimation method for and countermeasures to avoid loss aging during cable storage.     

Mutual injection-locking properties of monolithically-integratedsurface-emitting multiple-quantum-well distributed feedback lasers

The mutual injection-locking properties of a coupled pair of multiple-quantum-well distributed-feedback lasers with grating output couplers were investigated experimentally and theoretically. When the mutual injection locking occurred, the output of one laser decreased while that of the other increased. The locking curve was asymmetric, and a stable and an unstable locking region existed. From the theoretical analysis, it was found that the phase delay with which the electric field emitted from each laser to the other laser significantly influences the locking characteristics. The increase and decrease of the locked output power are caused by the phase delay. It is also shown that the laser which receives the larger optical injection behaves like a slave laser and the laser which has less optical injection behaves like a master laser, and the shape of the locking curve is determined by the balance between the α parameter and the thermal resistance     

The effects of air pollution and climatic factors on atmospheric corrosion of marble under field exposure

The atmospheric corrosion of marble was evaluated in terms of SO₂ concentration as air pollution and climatic factors such as rainfall, relative humidity, temperature and so on under the field exposure. Marble of calcite type (CaCO₃) was exposed to outdoor atmospheric environment with and without a rain shelter at four test sites in the southern part of Vietnam for 3-month, 1- and 2-year periods from July 2001 to September 2003. The thickness loss of marble was investigated gravimetrically. X-ray diffraction and X-ray fluorescent methods were applied to study corrosion products on marble. The corrosion product of marble was only gypsum (CaSO₄ · 2H₂O) and was washed out by rain under the unsheltered exposure condition. It was found that the most substantial factors influencing the corrosion of marble were rainfall, SO₂ concentration in the air and relative humidity. Based on the results obtained, we estimated the dose-response functions for the atmospheric corrosion of marble in the southern part of Vietnam.