Improving the shelf life stability of vacuum-packed fresh-cut peaches (Prunus persica L.) by radio frequency heating in water

The present study aimed to investigate the influence of radio frequency (RF) heating at 70 and 80 °C, in comparison with the traditional conventional heating. The RF heating technology was applied for maintaining the colour and textural quality as well as inactivating the enzymatic activity of polyphenol oxidase (PPO) and reducing the Escherichia coli growth in packaged fresh-cut peach samples. To evaluate this, 120 g of freshly cut peach fruit was placed in heat-resistant plastic bags, and 50 mL of sugar solution (12°Brix) was added to each bag and vacuum-packed for conventional heating and radio frequency (RF) heating. Our results demonstrated that the RF heating process could reduce the heating time by up to 83% at 70 and 80 °C as compared to conventional heating. Moreover, RF heating at 70 and 80 °C reduced the PPO enzymatic activity, which caused enzymatic browning, up to 85.46% and 93.5%, respectively, as compared to 40.86% reduction only for conventional heating. Furthermore, RF heating completely inhibited E. coli growth. Collectively, we demonstrated that RF heating is an emerging and promising technology for improving the quality of fresh-cut fruits such as peach during various storage conditions. The present study provides relatively novel information on the effectiveness of RF heating in maintaining the quality of fresh-cut peaches. In the future, we would like to investigate the effectiveness of RF heating on other agricultural products.     

Effects of water-soluble soybean polysaccharide on rheological properties,stability and lipid digestibility of oil-in-water emulsion during in vitro gastrointestinal digestion

Water-soluble soybean polysaccharide (SSPS) is a naturally occurring emulsifier. SSPS was used as the sole emulsifier to stabilize an oil-in-water (O/W) emulsion. The effects were investigated of different SSPS concentrations (3–20% (w/w)) on the lipid digestibility, rheological properties and stability of O/W emulsions during in vitro digestion model. The droplet size of the emulsions tended to increase during the oral phase because the emulsions were unstable and droplets coalesced, except with a SSPS concentration of 20% (w/w). The presence of SSPS markedly reduced the free fatty acid (FFA) content after its stabilized O/W emulsion passed through in vitro gastrointestinal digestion. The amount of FFA significantly decreased as the concentration of SSPS increased due to SSPS stabilization film on oil droplet surface and high viscous system. SSPS may be an attractive alternative ingredient to control the lipid digestibility of emulsions for various food products.     

FDCNet: filtering deep convolutional network for marine organism classification

Convolutional networks are currently the most popular computer vision methods for a wide variety of applications in multimedia research fields. Most recent methods have focused on solving problems with natural images and usually use a training database, such as Imagenet or Openimage, to detect the characteristics of the objects. However, in practical applications, training samples are difficult to acquire. In this study, we develop a powerful approach that can accurately learn marine organisms. The proposed filtering deep convolutional network (FDCNet) classifies deep-sea objects better than state-of-the-art classification methods, such as AlexNet, GoogLeNet, ResNet50, and ResNet101. The classification accuracy of the proposed FDCNet method is 1.8%, 2.9%, 2.0%, and 1.0% better than AlexNet, GooLeNet, ResNet50, and ResNet101, respectively. In addition, we have built the first marine organism database, Kyutech10K, with seven categories (i.e., shrimp, squid, crab, shark, sea urchin, manganese, and sand).     

Synthesis and Sintering of Cerium(II) Monosulfide

Cerium monosulfide (CeS) powder was synthesized by the reduction of Ce₂S₃ powder with metallic Ce, which was obtained from ceria (CeO₂) powder using carbon disulfide (CS₂) gas. To obtain the maximum amount of CeS from a mixture of Ce₂S₃ and Ce, an excess amount of metallic Ce, a stoichiometric composition, was necessary in the synthesis at 1273 K for 10.8 ks. The preliminary sintering experiments also were performed using a synthetic CeS powder containing a small amount of Ce, Ce₂O₂S, and β-Ce₂S₃ as impurities. It was found that the oxygen content in the sintered compact decreases gradually as the sintering temperature increases, because of the removal of the impurities due to the evaporation of the volatile CeO. Single-phase CeS was formed by sintering at 2173 K. To evaluate the activation energy for densification of single-phase CeS, a CeS powder was prepared by milling an initial sintered compact and was used as an ingredient for hot-press experiments. Densification data during hot-press sintering were analyzed using a kinetic equation, showing that boundary diffusion is a rate-limiting process. The results suggest that this boundary diffusion model can explain well the densification data, with an apparent activation energy of 479 kJ·mol^-1.     

Autonomous mobile robot based on behavior decision skill and control skill of the operator

This paper introduces a human skill base control algorithm using artificial neural networks and fuzzy reasoning for an autonomous mobile robot. Neural networks are used to select a suitable motion control pattern in actual environments. The back propagation algorithm adjusts the weights of the neural networks so that the selected motion control pattern corresponds to the action, which is obtained by the operator's behavior decision skill. To realize the selected motion control pattern, the orientation angle and the speed of the mobile robot are determined by fuzzy reasoning in which fuzzy rules are also automatically tuned so as to simulate the operator's control skill. We have implemented and tested the proposed control algorithm on an autonomous mobile robot and some experimental results demonstrate the effectiveness of the proposed control algorithm for the autonomous mobile robot. © 2000 Scripta Technica, Electr Eng Jpn, 131(2): 30–39, 2000     

Preparation of resins having various phosphonium groups and their adsorption and elution behavior for anionic surfactants

Resins containing phosphonium groups were prepared by reaction of chlorohydroxylated glycidylmethacrylate–divinylbenzene macroreticular resins with three trialkylphosphines. Triethylphosphine, tributylphosphine, and trioctylphosphine were used as trialkylphosphines. Adsorption and elution behavior of sodium benzenesulfonate (SBS) and sodium dodecylbenzenesulfonate (SDBS) on the resins were studied. Adsorption of SBS and SDBS increased with increasing the alkyl chain length of phosphonium groups in the resins. The adsorption of SBS decreased with increasing ionic strength of the solution, while the adsorption of SDBS increased with increasing ionic strength of the solution. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 371–378, 1999     

Combining UASB and the "fourth generation" down-flow hanging sponge reactor for municipal wastewater treatment.

A "fourth generation" down-flow hanging sponge (DHS) Reactor has been developed and proposed as an improved variant of post-treatment system for UASB treating domestic wastewater. This paper evaluates the potential of the proposed combination of UASB and DHS as a sewage treatment system, especially for developing countries. A pilot-scale UASB (1.15 m3) and DHS (0.38 m3; volume of sponge) was installed in a municipal sewage treatment site and constantly monitored for 2 years. UASB was operated at an HRT of 6 h corresponding to an organic load of 2.15 kg-COD/m3 per day. Subsequently, the organic load in DHS was 2.35 kg-COD/m3 per day, operated at an HRT of 2 h. Organic removal by the whole system was satisfactory, accomplishing 96% of unfiltered BOD removal and 91% of unfiltered COD removal. However, nitrification decreased from 56% during the startup period to 28% afterwards. Investigation on DHS sludge was made by quantifying it and evaluating oxygen uptake rates with various substrates. Average concentration of trapped biomass was 26 g-VSS/L of sponge volume, increasing the SRT of the system to 100-125 d. Removal of coliforms obtained was 3-4 log10 with the final count of 10(3) to 10(4) MPN/100 ml in DHS effluent.     

Thermoelectromechanical Interaction Among Multiparallel Cracks in a Piezoelectric Material

This paper investigates the thermoelectromechanical interaction among multi parallel cracks in a piezoelectric material under a uniform heat flow and a uniform mechanical load far away from the crack region. The crack faces are supposed to be insulated thermally and electrically. By using the Fourier transform, the thermal and electromechanical problems are reduced to systems of singular integral equations, respectively. The singular integral equations are solved numerically. Numerical calculations are carried out, and detailed results are presented to illustrate the influence of the thermoelectromechanical interaction on the stress and electric displacement intensity factors.     

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO? over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO? and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.