Electrochemical properties of N-doped hydrogenated amorphous carbon films fabricated by plasma-enhanced chemical vapor deposition methods

Nitrogen-doped hydrogenated amorphous carbon thin films (a-C:N:H, N-doped DLC) were synthesized with microwave-assisted plasma-enhanced chemical vapor deposition widely used for DLC coating such as the inner surface of PET bottles. The electrochemical properties of N-doped DLC surfaces that can be useful in the application as an electrochemical sensor were investigated. N-doped DLC was easily fabricated using the vapor of nitrogen contained hydrocarbon as carbon and nitrogen source. A N/C ratio of resulting N-doped DLC films was 0.08 and atomic ratio of sp³/sp²-bonded carbons was 25/75. The electrical resistivity and optical gap were 0.695 Ω cm and 0.38 eV, respectively. N-doped DLC thin film was found to be an ideal polarizable electrode material with physical stability and chemical inertness. The film has a wide working potential range over 3 V, low double-layer capacitance, and high resistance to electrochemically induced corrosion in strong acid media, which were the same level as those for boron-doped diamond (BDD). The charge transfer rates for the inorganic redox species, Fe^2+/3+ and Fe(CN)₆^4−/3− at N-doped DLC were sufficiently high. The redox reaction of Ce^2+/3+ with standard potential higher than H₂O/O₂ were observed due to the wider potential window. At N-doped DLC, the change of the kinetics of Fe(CN)₆^3−/4− by surface oxidation is different from that at BDD. The rate of Fe(CN)₆^3−/4− was not varied before and after oxidative treatment on N-doped DLC includes sp² carbons, which indicates high durability of the electrochemical activity against surface oxidation.     

间歇过程的故障分析和互锁控制器综合的集成

Integration amongst various decision-making processes, such as planning, design, and operation is necessary to dynamic and flexible batch production. To achieve a batch production integration, utilization of common models used for various decision-making processes is an effective approach. From this point of view, a batch system common model as described by a Petri net is proposed. In this article, a fault diagnosis technique for batch processes is presented using information about fault propagation and the possibilities of integration of fault analysis and controller synthesis are discussed on the basis of the Petri net based common models.     

Penicillium camemberti and Penicillium roqueforti enhance the growth and survival of Shiga toxin-producing Escherichia coli O157 under mild acidic conditions

The effects of secondary starter molds of common mold-ripened cheeses on the Shiga toxin-producing Escherichia coli (STEC) O157 were assessed in 3 model systems. In the 1st model, 8 STEC O157 strains were incubated in the spent culture of Penicillium camemberti or Penicillium roqueforti under mild acidic conditions at 25 °C. In the spent cultures of the mold at pH 4.8 to 5.0, the lag times of STEC O157 growth were significantly shorter than those observed in fresh medium. Analyses of the spent culture of P. camemberti showed that the causative agents of the growth enhancement were produced by the mold in response to an acidic environment and were not fully inactivated in heat treatment. In the 2nd model, P. camemberti and STEC O157 were cocultured in acidified milk at 25 °C. The population of STEC O157 reached 10(8) CFU/mL in the presence of the mold, whereas the population steadily declined in the absence of the mold. Although this growth enhancement was partially attributable to alkalization by the mold, it was observed even when the pH of this model was stabilized. In the 3rd model, 2 STEC O157 strains were incubated in the spent cultures of molds at pH 4.5 at 10 °C. In the spent culture, proportions of injured cells were significantly lower and D values were significantly higher than those in control, except one STEC O157 strain in the spent culture of P. camemberti. These results showed that the molds could enhance the growth and survival of STEC O157 by changing the environment. Practical Application: This study demonstrated that molds in foods can improve the growth and survival of the Shiga toxin-producing Escherichia coli O157. Because microbial interactions are ubiquitous in food, our results provide an important insight for understanding the behavior of microorganisms in food.     

Development of Amphipathic Antimicrobial Peptide Foldamers Based on Magainin 2 Sequence

Magainin 2 ( Mag 2 ), which is isolated from the skin of frogs, is a representative antimicrobial peptide (AMP), exerts its antimicrobial activity via microbial membrane disruption. It has been reported that both the amphipathicity and helical structure of Mag 2 play an important role in its antimicrobial activity. In this study, we revealed that the sequence of 17 amino acid residues in Mag 2 (peptide 7 ) is required to exert sufficient activity. We also designed a set of Mag 2 derivatives, based on enhancement of helicity and/or amphipathicity, by incorporation of α,α-disubstituted amino acid residues into the Mag 2 fragment, and evaluated their preferred secondary structures and their antimicrobial activities against both Gram-positive and Gram-negative bacteria. As a result, peptide 11 formed a stable helical structure in solution, and possessed potent antimicrobial activities against both Gram-positive and Gram-negative bacteria without significant cytotoxicity.     

Cystic teratoma of the greater omentum: a case report and review of the literature

Non invasive imaging techniques, such as, positronemission tomography (PET), contribute to our present knowledge of glucose metabolism. Besides measurements of net glucose metabolism, PET provides insights into complex processes of intracellular glucose metabolism (i.e., glucose transport and phosphorylation) and is also capable to measure muscular blood flow as a possible determinant of glucose metabolism.     

Usefulness of myeloperoxidase as a biomarker for the ranking of pulmonary toxicity of nanomaterials

Background

In order to examine whether myeloperoxidase (MPO) can be a useful marker for evaluating the pulmonary toxicity of nanomaterials, we analyzed MPO protein in bronchoalveolar lavage fluid (BALF) samples obtained from previous examinations of a rat model. In those examinations we performed intratracheal instillation exposures (dose: 0.2–1.0 mg) and inhalation exposures (exposure concentration: 0.32–10.4 mg/m³) using 9 and 4 nanomaterials with different toxicities, respectively. Based on those previous studies, we set Nickel oxide nanoparticles (NiO), cerium dioxide nanoparticles (CeO₂), multi wall carbon nanotubes with short or long length (MWCNT (S) and MWCNT (L)), and single wall carbon nanotube (SWCNT) as chemicals with high toxicity; and titanium dioxide nanoparticles (TiO₂ (P90) and TiO₂ (Rutile)), zinc oxide nanoparticles (ZnO), and toner with external additives including nanoparticles as chemicals with low toxicity. We measured the concentration of MPO in BALF samples from rats from 3 days to 6 months following a single intratracheal instillation, and from 3 days to 3 months after the end of inhalation exposure.

Results

Intratracheal instillation of high toxicity NiO, CeO_2, MWCNT (S), MWCNT (L), and SWCNT persistently increased the concentration of MPO, and inhalation of NiO and CeO₂ increased the MPO in BALF. By contrast, intratracheal instillation of low toxicity TiO₂ (P90), TiO₂ (Rutile), ZnO, and toner increased the concentration of MPO in BALF only transiently, and inhalation of TiO₂ (Rutile) and ZnO induced almost no increase of the MPO. The concentration of MPO correlated with the number of total cells and neutrophils, the concentration of chemokines for neutrophils (cytokine-induced neutrophil chemoattractant (CINC)-1 and heme oxygenase (HO)-1), and the activity of released lactate dehydrogenase (LDH) in BALF. The results from the receiver operating characteristics (ROC) for the toxicity of chemicals by the concentration of MPO proteins in the intratracheal instillation and inhalation exposures showed that the largest areas under the curves (AUC) s in both examinations occurred at 1 month after exposure.

Conclusion

These data suggest that MPO can be a useful biomarker for the ranking of the pulmonary toxicity of nanomaterials, especially at 1 month after exposure, in both intratracheal instillation and inhalation exposure.

     

Preparation and Characterization of Pt/Al-ZSM-5 Catalysts and their Reactivities for the Oxidation of CO with N2O at Low Temperatures

Al-ZSM-5 was prepared by treating H-ZSM-5 with an aqueous solution of Al(NO₃)₃ and used as a support for Pt catalysts. The Pt-loaded Al-ZSM-5 acts as an efficient catalyst for CO oxidation with N₂O at 273 K. TEM investigations revealed that Pt clusters with an average particle size of around 1–1.5 nm were homogeneously dispersed within Al-ZSM-5. Moreover, FT-IR and XPS analyses indicated that the small Al₂O₃ clusters formed within Al-ZSM-5 plays a significant role in the formation of highly dispersed Pt clusters within the pore structure of the ZSM-5 zeolite, leading to the high catalytic activity of Pt/Al-ZSM-5 as compared to Pt/ZSM-5.