Effects of Solvents in the Polyethylene Glycol Series on the Bonding of Copper Joints Using Ag2O Paste

The effects of reducing solvents on the bonding process using silver oxide paste in a copper joint were investigated. Three solvent types were tested: diethylene glycol (DEG), triethylene glycol (TEG), and polyethylene glycol (PEG). The strength of the joints was assessed by fracturing, which occurred at the interface of the copper oxide layer and the copper substrate in DEG and TEG samples and at the bonded interface in the PEG sample. Analysis of the samples revealed that, in the DEG and TEG samples, the copper substrate was oxidized during the bonding process, which compromised the shear strength of the joints. In contrast, the PEG sample exhibited nonuniform sintering of the silver layer while retaining good shear strength. It was found that the combination of DEG and PEG produced optimum shear strength in the copper joint, as PEG suppressed the growth of copper oxide and DEG promoted the formation of a dense sintered silver layer. The bonding strength achieved was higher than that of the gold-to-gold joint made using standard Pb-5Sn solder.     

Selective conversion of CO into methanol at ordinary temperature, part 5. Using an electrochemical photocell

Carbon monoxide has been selectively converted to methanol by means of an electrochemical photocell composed of the n-CdS photoanode and the Everitt's salt-modified platinum cathode. The catholyte was the CO-saturated aqueous solution containing a metal complex and a primary alcohol operating as homogeneous catalysts. In the anolyte, various reducing agents were added to reduce the holes created at the semiconductor. The current efficiency of the methanol formation was almost 100%, irrespective of the kind of metal complex if the reducing agent added as a hole scavenger to the anolyte has a sufficiently negative redox potential.     

Temperature and pressure conditions for the appropriate performance of charge and mass resolutions in balloon-borne CR-39 track detector for the heavy cosmic rays

We experimentally determined the suitable conditions of temperature and air pressure for measuring charge and mass compositions of heavy cosmic rays using CR-39 track detectors during long-duration, high-altitude balloon flights. The experiments were carried out utilizing Fe ion beams from Heavy Ion Medical Accelerator (HIMAC). Changes in the track registration sensitivity with temperature were studied at temperatures between 213 and 293 K. The charge and mass shifts around Fe ions are possibly 0.11 cu (charge unit) and 0.47 amu (atomic mass unit) at the temperature deviation between 227 and 243 K at balloon altitude. Decrease in track registration sensitivity as air pressure decreases has been observed between 13 Pa and 27 kPa. The charge and mass shifts around Fe ions are inferred to be 0.02 cu and 0.09 amu, respectively, when pressure varies between 20 and 27 kPa. During balloon flight, air pressure drops below this; therefore, care must be taken to keep the temperature and air pressure of CR-39 detectors within acceptable limits.     

Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.     

Study of molecular behavior in oxidation of insulating oil using terahertz spectroscopy

The stock of aged power equipment is increasing and it is important to clarify the characteristics of deteriorated insulating oil. This paper describes a basic study of molecular behavior in the oxidation of insulating oil by terahertz spectroscopy. The oxidation of insulating oil was modeled by using various compositions of dodecane and 2‐octanol. The terahertz measurements indicated that signi?cant absorption related to hydroxyl groups (‐OH) occurred between 6 and 7 THz. The absorption band was also observed in accelerated aging alkylbenzene, which is used in power equipment as insulating oil and is sensitive to hydrogen bonds. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(1): 9–15, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22335     

Measurement method of plasma current and density in atmospheric pressure plasma jet

We present a measurement method of the plasma current and density in an atmospheric‐pressure plasma generated using a quartz tube, helium gas, and copper foil electrode by applying a high RF voltage. The plasma in the form of a bullet is released as a plume or jet into the atmosphere. To study the characteristics of the atmospheric‐pressure plasma, the plasma current is measured using a current probe, and the drift velocity of plasma plume is measured using a photodetector. The current of the plasma plume is estimated by subtracting the ground line current from the power line current in the circuit. The density of plasma plume n is estimated from the plasma plume current I and the drift velocity v as I = envS, where S is the cross section of plasma plume. The density of the released plasma into the atmosphere is estimated as ∼10¹⁸ m⁻³ by the method. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Aerosol Particle Collection Efficiency of Holey Carbon Film-Coated TEM Grids

A simple sampling method to collect aerosol particles for transmission electron microscope (TEM) analysis was developed by R’mili and others in 2013. The method involves passing air through a holey carbon film-coated copper mesh TEM grid (holey carbon grid) and sampling particles by filtration. In this study, we proposed a modified calculation method to represent the collection efficiencies of holey carbon grids, taking into consideration the porosity of the copper mesh. We then evaluated the particle collection efficiencies of holey carbon grids both theoretically and experimentally. We tested the collection efficiency of two types of holey carbon grids, with nominal pore sizes of 1.2 and 0.6 μm, using particles of monodispersed polystyrene latex (PSL) and potassium chloride. The overall collection efficiency of each grid (E_grid) was determined by the downstream/upstream concentration ratio measured by condensation particle counters (CPCs). In addition, for PSL particles, the collection efficiency of the holey carbon film (E_film) was determined by the ratio of the number of particles on the film (counted on a scanning electron microscope) to the number of inflow particles (counted by a CPC). We compared model calculations against the experimental results obtained in this study and those reported by R’mili and others in 2013. These data showed that the calculated E_grid values were in reasonably good agreement with the experimental E_grid values. However, although the model calculation indicated that E_film ≈ E_grid, there was an inconsistency between the experimental E_film and E_grid, which requires further investigation in order to determine its cause.

Copyright 2014 American Association for Aerosol Research     

Surface-collection efficiency of Nuclepore filters for nanoparticles

The flat surface of Nuclepore filters is suitable for observing collected particles with a scanning electron microscope (SEM). However, experimental data on surface-collection efficiency are limited because surface-collection efficiencies cannot be measured directly using aerosol measuring instruments. In this study, the surface-collection efficiencies of Nuclepore filters were determined by establishing the ratio of the number of particles deposited on the surface of the filter visually counted with an SEM to the number of inflow particles counted by a condensation particle counter, using monodispersed polystyrene latex particles (30–800 nm) and silver particles (15–30 nm). Because Nuclepore filters with smaller pore sizes would be expected to produce higher minimum surface-collection efficiency and a higher pressure-drop, 0.08 and 0.2 µm Nuclepore filters were chosen as the test filters in view of both collection efficiency and pressure drop. The results showed that the minimum surface-collection efficiencies of the 0.08 µm pores at face velocities of 1.9 and 8.4 cm·s^?1 were approximately 0.6 and 0.7, respectively, and those of the 0.2 µm pores at face velocities of 1.5 and 8.6 cm·s^?1 were approximately 0.8 and 0.6, respectively. Because the pressure drop of the 0.2 µm pore filter was lower than that of the 0.08 µm pore filter under the same flow-rate conditions, the 0.2 µm pore filter would be more suitable considering the pressure drop and collection efficiency. The obtained surface collection efficiencies were quantitatively inconsistent with theoretical surface-collection efficiencies calculated using conventional theoretical models developed to determine the collection efficiency of filters with larger pores.

© 2016 American Association for Aerosol Research     

Cavity-length-dependent spectral and temporal characteristics ofthe gain switched V-groove quantum-wire laser

The cavity-length-dependent spectral and temporal characteristics of a V-groove AlGaAs-GaAs quantum-wire (QWR) laser are investigated. At short cavity lasers less than 300-μm, a discrete wavelength switching from the first (n=1; 837.7 nm for the 800-μm cavity) to the second (n=2;826.5 nm for the 220-μm cavity) subbands occurs due to the increased threshold gain, resulting from the increased cavity loss. Utilizing this characteristic, ultrafast lasing behaviors at the n=1 and n=2 quantized transitions of the QWR, generated by the gain-switching method, are demonstrated and compared