Polymers degradable under environmental conditions through end-modification of poly(α-methylstyrene) derivatives

To induce degradabilities in polymers in response to environmental conditions, the end-modification reactions of poly(α-methylstyrene) derivatives were carried out. When diphenylphosphine chloride was used as a modifier for the living end of para-substituted PMS, the coupling efficiency was ca. 50%. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(4-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, ω-2-phenylallyl PMS was prepared with almost quantitative functionality by the reaction of the living PMS with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl and ω-2-(4-tolyl)allyl PMS derivatives were synthesized. Based on thermogravimetric analysis, onset of the degradation temperature of the end-modified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(4-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(4-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the end unsaturated bond, which initiates the depolymerization of the polymer at rather low temperatures. Ionic degradation of these polymers was also investigated using butyllithium as an anionic initiator and methanesulfonic acid as a cationic initiator. Tendencies similar to the thermal degradation were observed. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through several mechanisms such as radical, anionic and cationic depolymerization reactions.     

Development, Analysis, and Application of a Glass–Alumina-Based Self-Constrained Sintering Low-Temperature Cofired Ceramic

The effects of an inner constraint layer and alumina particles on the microstructure, strength, and shrinkage of the laminated low-temperature cofired ceramic (LTCC) green sheet were investigated. Alumina particles of several sizes were used in the inner-constraint layer in order to strengthen the LTCC substrate. Smaller alumina particles in the inner-constraint layer produced a substrate with a high bending strength. Sintering shrinkage in the x – y direction of the LTCC is related to the bending strength of the debinded alumina particle layer used for an inner-constraint layer. A larger pore size in the inner-constraint layer was found to increase the distance of the glass penetration from the glass–alumina layer into the inner-constraint layer. The total thickness of the constraint layer changes the shrinkage in the x – y direction and the bending strength.     

Effects of genistein and staurosporine on angiotensin II-induced DNA synthesis, protein synthesis and mitogen-activated protein kinase activation in vascular smooth muscle cells

This study examines the effects of protein kinase inhibitors and activator on angiotensin II-induced DNA synthesis and protein synthesis of rat aortic smooth muscle cells. In quiescent confluent cells, angiotensin II induced a concentration-dependent increase in thymidine incorporation and leucine incorporation. The tyrosine kinase inhibitor genistein caused an inhibition of the angiotensin II-induced DNA synthesis but not of the agent-induced protein synthesis. The protein kinase C inhibitors staurosporine and calphostin C caused an inhibition of the angiotensin II-induced protein synthesis but not of the agent-induced DNA synthesis. The protein kinase C activator phorbol 12-myristate 13-acetate stimulated protein synthesis. Angiotensin II stimulated mitogen-activated protein (MAP) kinases and the angiotensin II-induced MAP kinase activation was inhibited by genistein but not by staurosporine. These findings suggest that angiotensin II-induced DNA synthesis is at least partly mediated via protein-tyrosine phosphorylation and angiotensin II-induced protein synthesis is at least partly mediated by activation of protein kinase C. It seems likely that MAP kinase activation is involved in DNA synthesis but not in protein synthesis induced by angiotensin II.     

New system for linear accelerator radiosurgery with a gantry-mounted video camera

PURPOSE: We developed a positioning method that does not depend on the positioning mechanism originally annexed to the linac and investigated the positioning errors of the system. METHODS AND MATERIALS: A small video camera was placed at a location optically identical to the linac x-ray source. A target pointer comprising a convex lens and bull's eye was attached to the arc of the Leksell stereotactic system so that the lens would form a virtual image of the bull's eye (virtual target) at the position of the center of the arc. The linac gantry and target pointer were placed at the side and top to adjust the arc center to the isocenter by referring the virtual target. Coincidence of the target and the isocenter could be confirmed in any combination of the couch and gantry rotation. In order to evaluate the accuracy of the positioning, a tungsten ball was attached to the stereotactic frame as a simulated target, which was repeatedly localized and repositioned to estimate the magnitude of the error. The center of the circular field defined by the collimator was marked on the film. RESULTS: The differences between the marked centers of the circular field and the centers of the shadow of the simulated target were less than 0.3 mm.     

Efficiently activated carbon fiber derived from grafted novoloid fiber

Graft copolymerization of methyl methacrylate onto novoloid fiber was carried out by the electron beam mutual irradiation method. The characteristics of the grafted fiber were almost the same as those of the original novoloid fiber. The grafted fiber was carbonized and activated to yield an efficiently activated carbon fiber. The yield and the specific surface area of the activated carbon fiber, derived from the grafted novoloid fiber, were much greater than those derived from the original novoloid fiber. This is because grafted poly(methyl methacrylate) decomposes into monomer and gaseous products, forming pores on the surface and inside of the novoloid fiber on heating. © 1993 John Wiley & Sons, Inc.     

Development of automatic fault point locating and sectional isolating system for power distribution line

This paper describes the development of the Automatic Fault Point Locating and Sectional Isolating System. This system locates a single-line-to-ground fault point at each pole by using ground-current sensors, and isolates the faulted section by controlling pole switches with no outage of unfaulted sections. The ground-current sensor is connected to the line between allied ground terminals of pole devices and grounded conductor. It detects a ground fault current of more than 0.64 amperes that is determined so as to avoid an unexpected operation by stray current, but to detect the fault current accurately, and sends out an emergency signal with time delay of 0.1 s. Sectional isolation starts when both the emergency signal from the sensor and relay operation signals from a substation are received and ends within a feeder circuit-breaker tripping time of 1.5 s.     

Ethynylvinylidene

Ethynylvinylidene, an energetically low-lying isomer of diacetylene, has been studied using ab initio molecular electronic structure theory. Geometries of diacetylene, ethynylvinylidene, and the transition state between them have been optimized using the double-ζ plus polarization (DZP) and triple-ζ plus double polarization function (TZ2P) basis sets with the self-consistent field (SCF), configuration interaction with single and double excitations (CISD), coupled cluster with single and double substitutions (CCSD), and CCSD with perturbatively included connected triple substitutions [CCSD(T)] methods. At the TZ2P CCSD(T) level of theory only single point energies have been determined at the TZ2P CCSD geometries. Harmonic vibrational frequencies and infrared (IR) intensities are reported for the three stationary points at the DZP SCF, TZ2P SCF, and DZP CISD levels of theory. For ethynylvinylidene, rotational constants, dipole moments, and dipole moment components along the principal axes are also given. This isomer is found to be an extremely shallow minimum on the C₄H₂ potential energy surface, and the classical barrier to rearrangement (to diacetylene) is vanishingly small at the highest level of theory.     

Unilateral labyrinthectomy downregulates glutamate receptor delta-2 expression in the rat vestibulocerebellum

Subcortical damage in neonates often has more severe consequences than in adults. Unilateral electrolytic hippocampal lesions in adult rats typically result in transient memory deficits, whereas neonatal lesions cause lasting memory impairments. We hypothesized that unilateral lesions made at birth may affect synaptic physiology in the contralateral hippocampus. Consequently, the ability to sustain long-term potentiation (LTP), a form of synaptic plasticity believed to underlie certain forms of memory, was compared between slices from the remaining hippocampus of rats lesioned as newborns and as adults. Initial studies showed that a train of 10 stimulation bursts patterned after the hippocampal theta rhythm produced robust and stable LTP both in slices from controls and rats lesioned at birth. However, a theta burst pattern of stimulation closer to intrinsic physiology (five burst pairs separated by 30 s each), induced significantly less LTP in slices from rats lesioned at birth compared to those from controls and rats lesioned as adults. To investigate possible mechanisms underlying the deficit, the degree of paired-pulse facilitation (PPF) as well as the amount of depolarization occurring between two successive theta bursts were analyzed. The lesion did not detectably change PPF characteristics, suggesting that presynaptic mechanisms are normal. However, the extent to which a burst response was increased by a prior burst was significantly diminished in slices from rats lesioned at birth compared to those from controls and rats lesioned as adults, indicating that postsynaptic factors involved in the initial triggering events of LTP are affected by the lesion. Reduced ability to sustain LTP in the remaining hippocampus may contribute to impaired memory function after unilateral neonatal hippocampal lesion.     

A series‐connected hybrid triple converter system

This paper proposes a hybrid multiconverter system aiming at a large‐capacity high‐voltage high‐efficiency converter system free from harmonics in its input/output. The system consists of n (n: integer) GTO converters and a single neutral‐point‐clamped IGBT converter connected in series by n + 1 output transformers. The GTO converters operate in a square‐wave switching mode while the IGBT converter operates in a PWM switching mode. The former produces a base part of the resultant output voltage. The latter not only produces an additional part of the resultant output voltage, but offsets the voltage harmonics generated by the GTO converters. A basic voltage control strategy for the hybrid converter system is proposed, and its validity is verified by experimental results. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 64–70, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20210     

Establishment of a modified rankine method for the separate determination of free and combined sulphites in foods. III

Summary Considerable improvements were made to the original Rankine method. Replacement of aspiration with an injection system contributed a great deal to the simplification of procedure, being accompanied with an increase in reproducibility. Air (flow rate 1.01/min) was used for injection because the use of inert gas gave little increase in recovery rate.Sodium bisulphite (free sulphite) and three kinds of combined sulphite compound (bisulphite adducts of acetaldehyde, pyruvic acid and D-mannose) were used to find the most suitable conditions for the separate determination of free and combine sulphites.Free sulphite was expelled from the sample by bubbling at 0 °C for 30 min. It was confirmed that no combined sulphite was dissociated under these conditions. The phosphoric acid concentration had an important role in the liberation of sulphite. When 25% phosphoric acid was used, more than 99% of free sulphite was expelled by cold bubbling and more than 99% of combined sulphite was recovered by heating afterwards for 10 min.The scope of the modified Rankine method was also extended to the determination of sulphite in concentrated orange juice.

---

Verwendung der modifizierten Rankine-Methode zur getrennten Bestimmung von Sulfiten in Lebensmitteln. III

Zusammenfassung Die Rankine-Methode wurde bedeutend verbessert. Ein Umtausch der Aspiration mit Blasensystem trug beträchtlich zur Vereinfachung des Bestimmungsverfahrens bei, und die Reproduzierbarkeit wurde verbessert. Luft (Fließrate 1,01/min) wurde als Blasengas benutzt, da der Gebrauch von Inertgas für die Wiederfindungsrate unbedeutend ist.Natriumhydrogensulfit (freies Sulfit) und drei Arten gebundener Sulfite (Acetaldehydhydrogensulfit, Pyruvathydrogensulfit undd-Mannosehydrogensulfit) dienten dazu, die geeignetsten Bedingungen für die getrennte Bestimmung der freien und gebundenen Sulfite zu ermitteln.Freies Sulfit wurde bei 0 °C durch 30 min Durchblasen vertrieben. Hierbei ging kein gebundenes Sulîit verloren. Die Phosphorsäurekonzentration war wichtig für die Freisetzung des Sulfites. Wenn man 25%ige Phosphorsäure verwendet, werden > 99% freien Sulfites beim Durchblasen in der Kälte vertrieben, während > 99% gebundenen Sulfites durch nachheriges 10 min langes Erhitzen wiedergewonnen werden.Die modifizierte Rankine-Methode wurde weiterhin für konzentrierte Säfte verwendet.

---

---

Studies on the Analyses of Sulphites in Foods (III)