Strengthening of poly(butylene adipate-co-terephthalate) by melt blending with a liquid crystalline polymer

Poly(butylene adipate-co-terephthalate) (PBAT) is a soft biodegradable polymer with a low melting temperature. PBAT has been melt-blended with a liquid crystalline polymer (LCP) aiming at preparing a new biodegradable polymer blend with improved mechanical properties. The phase structure and crystalline morphologies of the PBAT/LCP blends were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). It was found that the LCP domains are precisely dispersed in the PBAT matrix and that these domains act as the nuclei for PBAT crystallization. The nonisothermal crystallization temperature from the melt was dramatically shifted from 50°C to about 95°C by the addition of 20% LCP. In addition, the tensile modulus of the prepared blends increases gradually with increasing LCP content, indicating the excellent strengthening effects of LCP on the PBAT matrix. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Anti-Tumor Effect of Orally Administered Spinach Glycolipid Fraction on Implanted Cancer Cells, Colon-26, in Mice

We succeeded in purifying a major glycolipid fraction from a green vegetable, spinach. This fraction consists mainly of three glycolipids: monogalactosyl diacylglycerol (MGDG), digalactosyl diacylglycerol (DGDG), and sulfoquinovosyl diacylglycerol (SQDG). In a previous study, we found that the glycolipid fraction inhibited DNA polymerase activity, cancer cell growth and tumor growth with subcutaneous injection. We aimed to clarify oral administration of the glycolipid fraction, suppressing colon adenocarcinoma (colon-26) tumor growth in mice. A tumor graft study showed that oral administration of 20 mg/kg glycolipid fraction for 2 weeks induced a 56.1% decrease in the solid tumor volume (P < 0.05) without any side-effects, such as loss of body weight or major organ failure, in mice. The glycolipid fraction induced the suppression of colon-26 tumor growth with inhibition of angiogenesis and the expression of cell proliferation marker proteins such as Ki-67, proliferating cell nuclear antigen (PCNA), and Cyclin E in the tumor tissue. These results suggest that the orally administered glycolipid fraction from spinach could suppress colon tumor growth in mice by inhibiting the activities of neovascularization and cancer cellular proliferation in tumor tissue.     

Behaviors of the "raman spectroscopic signature of life" in single living fission yeast cells under different nutrient, stress, and atmospheric conditions

Time- and space-resolved Raman spectra of mitochondria in single living fission yeast cells have been measured under various nutrient, stress, and atmospheric conditions. A focus is placed on the behavior of the Raman band located at 1602 cm(-1), which sensitively reflects the metabolic activity in mitochondria and which has been called by us the "Raman spectroscopic signature of life". Addition of nutrients increases the intensity of this band by approximately 1.5 times, confirming its correlation with the metabolic activity in mitochondria. The spectra of cells cultured under 100% N(2), 100% O(2), and N(2)/O(2) (V(N2):V(O2) congruent with approximately = 4:1) atmospheres have been measured for both (16)O(2) and (18)O(2). Yeast cells have been found to lose their metabolic activity after the culture under 100% N(2) and 100% O(2) atmospheres. Cells cultured under a N(2)/(16)O(2) ((16)O(2) = 20%) atmosphere show strong "Raman spectroscopic signature of life". No (18)O isotopic shift has been found for the wavenumber 1602 cm(-1), indicating that the origin of this signature is neither O(2) nor an O-containing small molecule. Addition of H(2)O(2) causes a quick decrease of the "Raman spectroscopic signature of life", followed by the cis-trans isomerization in the unsaturated phospholipid chain. The "Raman spectroscopic signature of life" has thus been proved to be a reliable real-time and in vivo indicator for monitoring the metabolic activity in living cells.     

Functionalized nano-magnetic particles for an in vivo delivery system

Nanotechnologies to allow the nondisruptive introduction of carriers in vivo have wide potential for therapeutic delivery system. We have prepared functional nano-magnetic particles (d = 3 nm) by silanization with (3-aminopropyl) triethoxysilane. For the purpose of functionalizing the surface of the nanoparticles with amino groups for subsequent cross-linking with pharmaceuticals and biomolecules. The extremely small particles were successfully introduced into living cells without any further modification to enhance endocytic internalization, such as the use of a cationic help. The cells containing the internalized particles continued to thrive, indicating that the particles have no inhibition effect for mitosis. In addition, the particles could be incorporated into the subcutaneous tissue of mouse's ear from ear skin and were able to be localized upon application of an external magnetic field. The functionalized nano-magnetic particles are expected to be useful as a new delivery tool.     

Luminescence study of europium(III) tris(β-diketonato)/phosphonate complexes in chloroform

The extraction of Eu(III) with β-diketone, HA, and monodentate or bidentate Lewis bases, B, into chloroform and the luminescence properties of the extracted species were studied. Pivaloyltrifluoroacetone, Hpta, and 2-thenoyltrifluoroacetone, Htta, were used as the β-diketones. The Lewis bases, B, were tetraethyl methylene diphosphonate, POPO, which was bidentate, and diethyl benzylphosphonate, PhPO which was monodentate. Based on the extraction data, the stability constants, log β of the first complexes between tris(β-diketonato)Eu(III) and the phosphonate, EuA3B, were determined to be 6.0 for the POPO complex and 3.40 for the PhPO complex. The Eu(III) luminescence intensity in the EuA3POPO was larger than EuA3 where A was either pta or tta at similar concentrations of Eu(III), while that in Eu(pta)3PhPO was stronger than EuA3; however, in Eu(tta)3PhPO, it was weaker than Eu(tta)3. The POPO functions as a sensitizer, and the PhPO functions as a quencher for the tta chelate and as a sensitizer for the pta chelate. From the lifetime and quantum yield, φ, of the Eu(III) luminescence in the complexes as well as the observation of the extractability of Eu(III) with the Hpta and the phosphonates and of the luminescence spectra of the complexes, it was confirmed that the extraction of Eu(III) was remarkably enhanced with a β-diketonate and a strong Lewis base, and also the ternary complex that was formed as the extracted species, showed luminescence enhancement. This phenomenon may be due the formation of a strong bond between the Eu(III) and the strong Lewis base leading to more hydrophobicity in the extracted species and also to more effective energy transfer from the Lewis base to the Eu(III). It was not significant whether the donor atoms were N or O.     

A thin‐film silicon solar cell and module

We have developed a new light‐trapping scheme for a thin‐film Si stacked module (Si HYBRID PULS module), where a (a‐Si:H/transparent interlayer/microcrystalline Si) thin‐film was integrated into a large‐area solar cell module. An initial aperture efficiency of 13·1% has been achieved for a 910 × 455 mm Si HYBRID PLUS module, which was independently confirmed by AIST. This is the first report of the independently confirmed efficiency of a large‐area thin‐film Si module with an interlayer. The 19% increase of short‐circuit current of this module was obtained by the introduction of a transparent interlayer that caused internal light‐trapping. A mini‐module was shown to exhibit a stabilized efficiency of 12%. Outdoor performance of a Si HYBRID (a‐Si:H / micro‐crystalline Si stacked) solar cell module has been investigated for over 4 years with two different kinds of module (top and bottom cell limited, respectively). The HYBRID modules limited by the top cell have exhibited a more efficient performance than the modules limited by the bottom cell, in natural sunlight at noon. Copyright © 2005 John Wiley & Sons, Ltd.     

Psychological effects on surviving family members of seeing the deceased person after forensic autopsy.

In medicolegal autopsy, it is essential to consider the emotions experienced by relatives of the deceased person. This study examined the psychological effects on surviving family members of seeing the deceased person’s body after forensic autopsy. Participants (n = 359) were surveyed by means of a questionnaire designed to measure posttraumatic symptoms; 62 participants had been involved in traumatic events related to the bereavement (trauma-involved group), and 297 participants had not (no-involvement group). Statistical analyses using structural equation modeling (SEM) showed that the model implying a significant difference between these groups was better fitted, than that implying no difference. The trauma-involved group showed a higher score for posttraumatic symptoms than the no-involvement group (Ms = .32 and .00, respectively). However, there was a negative correlation in the trauma-involved group between seeing the deceased person after forensic autopsy and posttraumatic symptoms (r = ?.43), but there was no correlation (r = ?.01) in the no-involvement group. Furthermore, factor structure for posttraumatic symptoms in bereaved people showed that treatment focused on avoidance behavior would be most effective Japan. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Static and Fatigue Behavior of Thick Pultruded GFRP Plates with Surface Damage

Glass fiber-reinforced polymer (GFRP) bridge decks suffering frequent cyclic loading of heavy wheels require relatively thick pultruded composites. To examine the behavior of 12 mm thick pultruded GFRP plates containing surface layers and to study the influence of surface damage, which may be present on such decks, static and fatigue tensile tests were carried out. Severe indentation yielded not only visible damage, but also an invisible damage in the unidirectional layer. Loss of cross section area due to both damages affected the static ultimate loads. Fatigue cracks were found around higher stress concentrations on the surface layer as early as approximately 10% of the total fatigue life. These initial cracks, however, barely affected the fatigue life because delamination of the surface layers prevented the cracks from propagating. The invisible shear crack due to indentation barely affected the fatigue life since earlier splitting between initially damaged and undamaged fibers mitigated the crack propagation.     

Study of the neutron multiplication effect in an active neutron method

The neutron multiplication effect appears when an item contains large amounts of nuclear material. The neutron multiplication effect in this paper means the effect of subsequent fission reactions which are caused by fission neutrons produced by interrogation neutrons from a neutron generator. The previous active neutron method could not distinguish between first-fission and subsequent-fission neutrons and might overestimate the amount of nuclear material. However, the neutron multiplication effect in the active neutron method has not been adequately investigated. We discuss the evaluation method of the multiplication effect in the fast neutron direct interrogation method, one of the active neutron methods, using simulations with the Monte Carlo code MVP and experiments involving uranium waste drums. The first-generation neutrons from an external neutron source generate fission neutrons called second-generation neutrons, the second-generation neutrons generate third-generation neutrons, and so on. This study supposes that the neutron multiplication effect is mainly caused by the third-generation neutrons under the condition that the fourth-generation neutrons are much fewer. This paper proposes a correction method for the neutron multiplication effect in the measured data.     

Liquid rubber as a reactive softener for 1-chlorobutadiene–butadiene rubber

Blending of hydroxyl-terminated liquid butadiene rubber (HT-BR) with 1-chlorobutadiene–butadiene rubber (CB–BR) was carried out in the presence of isopropylidenedicyclohexyl diisocianate (IPCI) or sulfur as a curing agent, It was found that the HT-BR/CB–BR blend displayed a good plasticity, i.e., its Mooney viscosity became lower than that of CB–BR, which brought abcut a good processability. The HT-BR fraction (E_s from the HT-BR/CB–BR blend vulcanizates, which was prepared by the IPCI-cured system, was evaluated to be ca. 20% by the equilibium swelling test in benzene. The E_s of the sulfur-cured blend was ca. 70% This result shows that HT-BR acted as a reactive softener when it was compounded with CB–BR by curing with the diisocyanate. The tensile strength of the IPCI vulcanizate was exceedingly higher than that of sulfur-cured vulcanizate at all blend raios of HT-BR to CB–BR. © 1996 John Wiley & Sons, Inc.