Ti-Containing Silsesquioxane Gels with Tunable Porosity: Preparation and Catalytic Activity for the Epoxidation of Cyclooctene by Aqueous Hydrogen Peroxide

Novel Ti-containing silsesquioxane gel catalysts were prepared by the hydrosilylative condensation of Ti-containing silsesquioxanes together with cubic silsesquioxanes and spherosilicates. The porosity of gels was controlled by changing the composition and the mixing order of the starting materials. Both porous and nonporous gels were found to act as excellent heterogeneous catalysts towards the selective epoxidation of cyclooctene by the use of aqueous hydrogen peroxide as an oxidant.     

Properties of bifunctional phosphonate fibers derived from chloromethylstyrene grafted polyolefin fibers

Bifunctional fibers containing phosphonate and sulfonate were derived from chloromethylstyrene grafted polyolefin fibers (PPPE-g-CMS) by phosphorylation and subsequent sulfonation reactions. It was clarified that phosphorylation of PPPE-g-CMS by Arbusov reaction is more suitable than one by the reaction with PCl₃ in the presence of AlCl₃, because the latter damaged fibers and gave phosphinate groups in addition to phosphonate ones. Then, bifunctional fibers containing phosphonate and sulfonate groups were prepared by sulfonation of monofunctional phosphonate fibers obtained via Arbusov reaction with chlorosulfonic acid. The metal ion selectivity of the bifunctional fibers was governed by both phosphonate and sulfonate groups. In addition, bifunctional fibers gave much more excellent kinetic performances in column-mode uptake of Cu(II) than the monofunctional phosphonate fibers and resin.     

Effects of filtration through activated carbons on peroxide,thiobarbituric acid and carbonyl values of autoxidized soybean oil

Effects of filtration bleaching on peroxide value (PV), thiobarbituric acid value (TAV) and carbonyl value (CV) of autoxidized soybean oil were investigated by using twenty-three kinds of activated carbon in order to improve oil quality. From the decreases in PV, TAV and CV and from the physical and chemical properties of activated carbons, it was suggested that hydroperoxides, aldehydes and ketones were adsorbed on the acid sites distributed over the surface or within the pores of the activated carbons while the autoxidized soybean oil flowed through the packed column. The residual tocopherols in autoxidized soybean oil and treated soybean oil were determined during storage. The decrease in oxidative stability of treated soybean oil seemed to be caused by elimination ofα-,β-andγ-tocopherols.δ-Tocopherol was chemically more stable thanα-,β- andγ-tocopherols in autoxidized soybean oil.     

Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass

In this study, pure Ti was coated on Zr₅₅Al₁₀Ni₅Cu₃₀ bulk metallic glass (BMG) using a physical vapour deposition (PVD) technique with magnetron sputtering. Microstructures of Ti coating, BMG substrate and interface were investigated by conventional and high-resolution transmission electron microscopy (TEM and HREM). The electrochemical behavior of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG was studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) in Hanks' solution. Scanning electron microscopy (SEM) was used to characterize the surface morphology of the coating after electrochemical testing. HRTEM observation reveals that the sputtering Ti coating consists of α-Ti nano-scale particles with the size about 10 nm. The polarization curves revealed that the open-circuit potential shifted to a more positive potential and the passive current density was lower after Ti coating was applied in comparison with that of the monolithic Zr₅₅Al₁₀Ni₅Cu₃₀ BMG. Electrochemical impedance spectroscopy (EIS) measurements showed that the Bode plots of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG presented one time constant for 1 h and 12 h immersion and two time constants after 24 h immersion. The good bonding condition between Ti coating and Zr₅₅Al₁₀Ni₅Cu₃₀ BMG substrate may be responsible for the high corrosion resistance of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG.     

Effects of cyclic vertical loading on bearing and pullout capacities of piles with continuous helix wing

Laboratory and field tests were conducted to investigate the bearing and pullout capacities of steel piles with a continuous helix wing during cyclic loading. Both continuous helix and straight-sided piles were subjected to monotonic compressive, monotonic tensile, and cyclic reversal loading in the laboratory, while only the continuous helix pile was tested in the field. Both the laboratory and the field tests showed that the bearing and pullout capacities of the continuous helix pile under cyclic reversal loading decreased to approximately 60–80% of those of the pile under monotonic loading, with a larger reduction seen in the laboratory tests. The decrease in resistance was mainly due to the reduction in shaft friction, which was likely to be the result of soil disturbance and loosening around the pile with cyclic loading. The laboratory tests also showed that the tip resistance of the straight-sided pile under cyclic reversal loading was reduced, similarly due to the loosening of the soil, particularly underneath the pile tip. The tip resistance of the continuous helix pile, in contrast, did not degrade with cyclic loading, owing to the presence of the wing immediately above the pile tip that inhibited the loosening of the soil. These findings were supported by similar field test observations.     

Hydration behavior of perfluorinated and hydrocarbon-type proton exchange membranes: Relationship between morphology and proton conduction

The relationships between morphology and proton conduction for Nafion membranes and hydrocarbon-type proton exchange membranes, namely, sulfonated poly(arylene ether ether ketone) (S-PEEK) and sulfonated poly(arylene ether sulfone) (S-PES), were investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The direct simultaneous observation of surface morphology and active regions of proton conduction on membranes by combined high-resolution AFM phase imaging and an electrochemical technique at controlled humidity provided significant morphological information, particularly for the hydrocarbon-type membranes that exhibit few or no features on SAXS profiles. For the Nafion membranes, the active proton paths became denser and congregated with each other at over 60% RH, resulting in the formation of well-connected networks. For the hydrocarbon-type membranes, however, only the relatively small and dispersed proton paths were observed, which showed no significant change even as water content increased. We have demonstrated that the differences in microscopic morphology between the Nafion and hydrocarbon-type membranes are associated with the differences between their macroscopic proton conductivities.     

New method for testing phototoxicity of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs), widespread environmental pollutants, were recently reported to show photomutagenesis. As contaminants in the environment are usually exposed to sunlight, a way to evaluate the phototoxic characteristics of pollutants is required. We have previously found that phosphorylation of histone H2AX (gamma-H2AX), which accompanied the induction of DNA double strand breaks (DSBs), was significantly induced by low concentrations of benzo[a]pyrene (10(-9)-10(-7) M) and UVA (0.6 J/cm2) in CHO-K1 cells. Higher concentrations have been required for the detection of DSBs. The aim of the present study is to investigate the applicability of gamma-H2AX in a new phototoxicity assay of PAHs. The human keratinocytes, HaCaT, were treated with four model PAHs (naphthalene, phenanthrene, pyrene, and benzo[a]pyrene, 10(-11)-10(-7) M) and/or UVA (5 J/cm2), and the induction of gamma-H2AX was assessed. Furthermore, DSBs were directly detected using a biased sinusoidal field gel electrophoresis, and the cell viability was examined as a general assay of phototoxicity. The induction of gamma-H2AX was detected in the presence of all the PAHs except naphthalene at concentrations of 10(-9)-10(-7) M, whereas neither DSBs nor cell death could be detected at those concentrations, and higher concentrations were required for the detection. Naphthalene showed no phototoxicity in any of the three different assays. These findings suggest that histone H2AX is a potential moleculartargetfor detecting the phototoxicity of PAHs more sensitively than the detection of cell viability and DSBs.     

Quantitative bioimaging analysis of gonads in olvas-GFP/ST-II YI Medaka (transgenic Oryzias latipes) exposed to ethinylestradiol

This study investigates the adverse and persistent effects of ethinylestradiol (EE2) on mature gonads of transgenic olvas-GFPIST II-YI medaka (Oryzias latipes). The measurement of gonadal size calculating the GFP-fluorescent area was used as a technique that enabled monitoring gonads in living specimens by GFP fluorescence. First, mature medaka were exposed to EE2 (47.8-522 ng/L) for 4 weeks. The gonads showed a significant reduction of the GFP-fluorescent area and Gonadosomatic Index in males exposed to EE2 at >216 ng/L and females exposed at 522 ng/L. Histologically, males at all treatments exhibited testis-ova and additionally, high connective tissue prevalence at > or =216 ng/L. Next, mature male medaka were exposed to EE2 (43.7-473 ng/L) for 3 weeks and allowed to depurate for 6 weeks, to investigate persistent effects of EE2. Continuous gonad observation showed that GFP began to decline 3 weeks after initial exposure to > or =215 ng/L. After depuration, the gonad's fluorescent areas gradually recovered, with no statistical difference at the end of the depuration period; normal spermatogenesis was present in these individuals. Alterations in GFP fluorescence clearly indicate the condition of the gonad in transgenic medaka and this strain showed a facilitated screening fish model to detect the adverse effects on the gonad by estrogenic chemicals.     

Volatile aroma components and antioxidant activities of the flavedo peel extract of unripe Shiikuwasha (Citrus depressa Hayata)

The flavedo peel extracts of unripe Shiikuwasha (Citrus depressa Hayata) fruits were extracted using steam distillation (SD) or a cold-press (CP) system. Volatile aroma content and composition were determined using gas chromatography (GC) and each compound was identified using gas chromatography-mass spectrophotometry (GC-MS). The major constituents of the extracts were monoterpene hydrocarbons (91.75-93.75%[709.32-809.05 mg/100 g of fresh flavedo peel]) including limonene (43.08-45.13%[341.46-379.81 mg/100 g of fresh flavedo peel]), γ-terpinene (27.88-29.06%[219.90-245.86 mg/100 g of fresh flavedo peel]), and p-cymene (8.13-11.02%[61.47-97.22 mg/100 g of fresh flavedo peel]). The extraction process used was determined to be a decisive factor that affects the composition of key citrus aroma components, as well as the antioxidant activities of the Shiikuwasha fruit. Antioxidant capabilities of the extracts were examined by assay of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity and β-carotene bleaching inhibition. The cold-press extraction system may better retain the total phenolic content of the flavedo peel and display superior antioxidant activities, compared to the steam distillation extraction method. PRACTICAL APPLICATION: Shiikuwasha (Citrus depressa Hayata) is a type of small citrus fruit, and has been used as raw material for beverage and food additive productions in Japan. It had a unique aroma composition in which the limonene content of its peels is lower than that of other commonly known citrus peels. The present study detailed the volatile aroma composition, as well as antioxidant capabilities of Shiikuwasha peel extracts of different extraction methods, that are cold-press and steam distillation methods. The results of this study may provide a basis for selection of Shiikuwasha peel extracts in food industry for citrus flavor production.