Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution

The corrosion behavior of pure aluminum in inhibited and uninhibited 4 MKOH was investigated by means of hydrogen collection, polarization curve measurement and electrochemical impedance spectroscopy (EIS). The results showed that the corrosion of pure aluminum was greatly inhibited by the addition of ZnO and dimethyl amine epoxy propane (designated as DE). EIS and EDAX analyses revealed that ZnO produces its effect by depositing on the aluminum surface, which increases the overpotential of hydrogen evolution. It was also found that the addition of DE could greatly improve the deposition of zinc layers.     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

A noisy-smoothing relevance feedback method for content-based medical image retrieval

In this paper, we address a new problem of noisy images which present in the procedure of relevance feedback for medical image retrieval. We concentrate on the noisy images, caused by the users mislabeling some irrelevant images as relevant ones, and a noisy-smoothing relevance feedback (NS-RF) method is proposed. In NS-RF, a two-step strategy is proposed to handle the noisy images. In step 1, a noisy elimination algorithm is adopted to identify and eliminate the noisy images. In step 2, to further alleviate the influence of noisy images, a fuzzy membership function is employed to estimate the relevance probabilities of retained relevant images. After noisy handling, the fuzzy support vector machine, which can take into account different relevant images with different relevance probabilities, is adopted to re-rank the images. The experimental results on the IRMA medical image collection demonstrate that the proposed method can deal with the noisy images effectively.     

浅谈玻璃钢的加工

本文在实际研究和应用的基础上，对玻璃钢的传统加工方法和特种加工方法，如激光切割、纯水射流切割和磨料水射流切割作了简要论述。     

The removal of dichloromethane from atmospheric pressure air streams using plasma-assisted catalysis

Plasma-assisted catalysis was used for the destruction of 500 ppm of dichloromethane, CH₂Cl₂ (DCM), in gas streams of air using a non-thermal, atmospheric pressure plasma utilising a dielectric packed bed. The combination of plasma and catalyst gave improved destruction of DCM. Eight catalysts which including alumina, TiO₂ and various zeolites were investigated with the finding that alumina in a one-stage reactor configuration and TiO₂ and HZSM-5 in two-stage configurations gave the best DCM destructions. The sodium zeolites are capable of reducing by 50% the unwanted NO_x by-products, formed by plasma processing in air. The nature of the catalyst is important in terms of the destruction efficiency, end-product selectivity and NO_x reduction.     

水蓄冷运行控制分析

随着空调蓄冷技术的不断发展,它已逐渐在节能效果、经济效益和社会效益等方面展现出强大的生命力和广阔的市场。主要探讨了自然分层蓄冷形式,该方式利用温度和密度不同的原理,通过斜温层分隔高、低温水。必须严格进行水蓄冷系统的运行控制,否则极易打破其自然分层的规律。     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

广角摄像机在机器人视觉定位中的应用

为了保证广角摄像机在现代机器人视觉定位应用中的准确性,以广角摄像机像素坐标的反畸变过程为研究对象,提出一种在畸变对应表的基础上使用中心迭代法以及区域插值法确定物体实际位置的方法。通过实验证明了该方法能够测量物体的位置,其精度能够满足工业使用要求。     

扎赉诺尔褐煤制取高炉喷吹料和中热值煤气研究 (Ⅰ)煤气、焦油产率及性质

本文是在10kg／h固体热载体干馏实验装置上用扎赉诺尔褐煤制取高炉喷吹料和中热值煤气的研究结果。在干馏温度450℃～650℃范围制得煤气110Nm3/t～400Nm3/t，煤气热值为14．7MJ／Nm3～17．5MJ／Nm3，属中热值煤气。可供民用，也可用于补充钢铁企业燃气不足，平衡能源。得低温焦油2％～9％，可加工成化工产品和燃料油。半焦可用于高炉喷吹。     

Inspection of Remanent Polarization in the Ferroelectric Ceramic PZT 95/5 Through Pyroelectric Effect

Shock-induced depoling of the ferroelectric (FE) ceramic PZT 95/5 is utilized in a number of pulsed power devices. Nondestructive testing of remanent polarization of PZT 95/5 is developed by pyroelectric effect in this paper. Approximately linear relation between the change of polarization during low- to high-temperature rhombohedral FE phase and the remanent polarization was found through pyroelectricity of a single piece of PZT 95/5 ceramics. The change of polarization of a prototype for shock-driven pulsed power during the FE_HT↔FE_LT phase transformation was also investigated through directly measuring the pyroelectric current. Results indicate that pyroelectric effect caused by the reversible FE_HT–FE_LT phase transition could be used as a non-destructive inspection for the remanent polarization of a prototype about shock-driven pulsed power supply.