Effect of Gallia Addition on the Sintering Behavior of Samaria-Doped Ceria

Samaria-doped ceria (SDC) was prepared by using the solid-state reaction method. Sintering of SDC was significantly promoted by adding a small amount of gallium. SDC that had 1% of gallium added, sintered at 1450°C, showed almost the same properties as SDC sintered at 1600°C. Measurements showed that the addition of gallia could reduce the sintering temperature by 150°C without deteriorating the properties of SDC as an electrolyte for solid oxide fuel cells.     

Soluble VCAM-1 induces chemotaxis of Jurkat and synovial fluid T cells bearing high affinity very late antigen-4

It has been shown that cells with high affinity very late Ag (VLA)-integrins have up-regulated expression of a beta1-subunit epitope, which is detected by 15/7 mAb. In this study, we demonstrate that soluble VCAM-1 (sVCAM-1) exhibits chemotactic activity of T cells with high affinity VLA-4 against VCAM-1, such as Jurkat T cells and IL-2-dependent T cells. Moreover, we found that T cells in the synovial fluid show high basal migration in the absence of sVCAM-1, compared with peripheral blood T cells in patients with rheumatoid arthritis. Among T cells in the synovial fluid, CD45RO+ memory T cells, in response to sVCAM-1, showed a much higher than basal migratory response when compared with CD45RA+ naive cells, while no significant difference was observed between CD4+ and CD8+ T cells. The chemotactic activity of sVCAM-1 is inhibited in the presence of anti-VCAM-1 and anti-VLA-4, which interfered with the binding between VCAM-1 and VLA-4. Inhibition studies using various kinase inhibitors (C3 exoenzyme, KN62, and H7) show that Rho, Ca2+/calmodulin-dependent kinase II, and protein kinase C are involved in signal transduction in sVCAM-1-induced chemotaxis, respectively, whereas tyrosine kinase seems to play a lesser role, since genistein showed only partial inhibition of T cell chemotaxis. Western blot analysis using an anti-phospho-serine mAb (MO82) reveals that Ser82 in the vimentin is phosphorylated specifically by Ca2+/calmodulin-dependent kinase II through sVCAM-1 activation in the IL-2 dependent T cells. Collectively, by inducing migration and recruitment of T cells through several kinase activations, sVCAM-1 contributes to the development of the inflammation of synovial lesion.     

On the formation of solid solution in Co3−xMnxO4 system

The formation of solid solution in the Co_3−xMn_xO₄ system in atmospheres of oxygen, air and argon was examined at a constant temperature of 1000 °C. In oxygen, a small amount of the NaCl-type compound was found to co-exist with the cubic spinel in the composition rangex≤0.1. A single phase of the cubic spinel was found in the range 0.1 to 1.3 and the tetragonal spinel above 1.9. In the rangex=1.3 to 1.9 where the cubic and tetragonal spinels co-exist they both have very broadened diffraction line profiles. In air, the identified phases and the changes in their lattice constants with composition were very similar to those in oxygen, except that the NaCl-type compound and the cubic spinel co-existed over a larger range. In argon, the cubic spinel was not observed over any of the composition range and the NaCI-type compound and the tetragonal spinel co-existed in the wide range of 1.1 to 2.3. The experimental results are discussed with regard to the cation distribution in the spinel and also to the relative stability of Co³⁺- and Mn³⁺-ions under the low partial pressure of oxygen.     

Molecular cloning of porcine growth differentiation factor 9 (GDF-9) cDNA and its role in early folliculogenesis: direct ovarian injection of GDF-9 gene fragments promotes early folliculogenesis

Growth differentiation factor-9 (GDF-9) is a growth factor secreted by oocytes in growing ovarian follicles. To investigate the ovarian function of GDF-9 in pigs, we first cloned porcine GDF-9 complementary DNA (cDNA), and then injected its gene fragments into the ovary in gilts. Porcine GDF-9 has open reading frame (ORF) homologies of 81.4%, 84.6%, 84.2%, 72.7% and 72.6% with its human, bovine, ovine, rat and mouse counterparts respectively. Regarding the deduced amino-acid sequence of the mature protein, the corresponding homologies reach 92.1%, 97.8%, 97.0%, 89.6% and 88.1% respectively. To investigate the role of GDF-9 in early folliculogenesis, the ovaries of 2-month-old prepubertal gilts were injected with GDF-9 gene fragments. The injection of porcine GDF-9 gene fragments resulted in an increase in the number of primary, secondary and tertiary follicles, concomitant with a decrease in the number of primordial follicles. These results indicated that exogenous GDF-9 can promote early folliculogenesis in the porcine ovary, and that a technique for direct ovarian injection of GFD-9 gene fragments may contribute to a novel therapy for prevention and treatment of infertility associated with ovarian dysfunction.     

A general steady state mathematical model for fin-and-tube heat exchanger based on graph theory

Fin-and-tube heat exchangers are widely used in air conditioners, chillers, etc. A lot of factors, including arrangement of refrigerant circuits, configure specification of fins and tubes, and operating conditions, have significant influence on the performance of fin-and-tube heat exchangers. For the purpose of fast design of high performance heat exchangers, a simulator reflecting the influence of these factors is necessary. In this paper, a general steady state mathematic model based on the graph theory is presented. With the help of the directed graph and graph-based traversal methods (Breadth-first search and Depth-first search), this model is capable to describe any flexible refrigerant circuit arrangement, and quantify the refrigerant distribution in the refrigerant circuit and heat conduction through fins. An alternative iteration method is also developed to solve the conservation equations, which can shorten the simulating time effectively. The model is verified with the experimental results, and the maximum error is within ±10.0%. A simulator based on this model has been used for designing practical fin-and-tube heat exchangers.     

Hydrophilic surface modification of polypropylene films by CCl4 plasma

The CCl₄ plasma treatment of polypropylene films was investigated from the viewpoint of hydrophilic surface modification using a contact-angle meter, ATR FTIR spectroscopy, and angular XPS. Hydrophilicity and chemical composition of the CCl₄ plasma treatment was effective in hydrophilic modification. The advancing contact angle of water for polypropylene films was decreased from 99° to 81-7° by the CCl₄ plasma treatment, and the surface energy increased from 27.2 to 38.9-67.7 mJ/m² when the discharge current varied from 50 to 150 mA. The CCl₄ plasma initiated chlorination, oxidation, and aluminum sputtering reactions. The chlorination of polypropylene films was favorable in a mild CCl₄ plasma operated at discharge current of 50 mA. The oxidation and aluminum sputtering reactions were predominant over the chlorination in strong CCl₄ plasmas operated at discharge currents of more than 75 mA. The chlorination initiated by the mild CCl₄ plasma was restricted near the film surface within 36 Å deep. The regions modified with the strong CCl₄ plasma reached inner layers of 36-49 Å deep. Hydrophilicity caused by the CCl₄ plasma treatment may be due not only to chlorine functionalities but also to oxygen and aluminum functionalities. © 1993 John Wiley & Sons, Inc.     

Effects of functional groups in glow discharge polymerization

Summary Glow discharge polymerizations of allyltrimethylsilane (ATMS) and trimethylvinyloxysilane (TMVOS) were investigated by elemental analysis and infrared spectroscopy. The formed polymers were far different in elemental composition from the starting materials, and possessed high carbon and hydrogen contents. There was less difference in an infrared-spectral sense between the two polymers from ATMS and TMVOS. A polymer-forming process in a discharge state is discussed.     

Optimization of human interface configurations and safety control policies for alarm subsystems

This paper gives four alarm subsystems with different human interface configurations which include fault-alerting and safety-presentation types, where two kinds of correspondences between sensor states and plant states are distinguished. For each configuration, we give probabilistic analyses on occurrence of spurious-shutdowns (SS) and hazardous-accidents (HA). We prove that either the fault-alerting alarm subsystem or the safety-presentation alarm subsystem can be an optimal alarm subsystem which minimizes SS and HA failure probabilities simultaneously if we choose a human interface configuration and its associated safety-control policy in an appropriate manner.     

Structural Distortion and Compositional Gradients Adjacent to Epitaxial LiMn2O4 Thin Film Interfaces

Thin film electrode materials are key components in the development of high rate, high capacity solid‐state Li‐ion batteries. Detailed knowledge of the epitaxial film/substrate(current‐collector) interface structures, which provides insights into epitaxial growth mechanisms and the effects of microstructure on electrochemical properties, is essential for efficient materials and device design. Here we report the epitaxial growth mechanism of a typical cathodic LiMn₂O₄ thin film by exploring the detailed structural and compositional variations in the vicinity of a film/substrate interface using state‐of‐the‐art scanning transmission electron microscopy. Direct observation of atom columns shows the epitaxial film forms an atomically flat and coherent heterointerface with the substrate, but that the crystal lattice is tetragonally distorted with a measurable compositional gradient from the interface to the crystal bulk. The growth mechanism is interpreted in terms of a combination of chemical and physicomechanical effects, namely a complex interplay between the internal Jahn‐Teller distortions induced by oxygen non‐stoichiometry and the lattice misfit strain.