Recycling of pharmaceutical waste gelatin for controlled‐release applications. I. A 2,4‐dicholorphenoxy acetic acid based system

Gelatin is a natural macromolecular protein. It contains a wide variety of amino acids in its polymer structure, and it is colorless to yellowish, water‐soluble, and tasteless. It is used as a dispersing agent, sizing medium, and coating for photographic films and in pharmaceutical formulations. In this study, biodegradable mulching, based on waste gelatin from pharmaceutical gelatin scraps (derived from pharmaceutical soft gelatin capsule production), was formulated via the casting of water solutions or suspensions into flexible and consistent films. Gelatin was blended with synthetic materials such as poly(vinyl alcohol) and other natural wastes such as sugar cane bagasse and sawdust. To all formulations, 2,4‐dichlorophenoxy acetic acid (2,4‐D) was added as a herbicide. The morphology and mechanical properties of the samples were investigated with scanning electron microscopy and tensile testing, respectively. The results showed that the produced films had controlled‐release properties. The effects of various additives and crosslinking on the films and the release of the herbicide 2,4‐D from the films were also investigated. The introduction of synthetic and natural additives reduced the release rate of 2,4‐D. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2313–2319, 2004     

Antioxidant properties and composition of Majorana syriaca extracts

Majorana syriaca is an important food‐flavouring ingredient in the Middle Eastern culture known commonly as Za'atar. The components of the plant were extracted in a Soxhlet apparatus sequentially with solvents of increasing polarity, specifically with petroleum ether (P), diethyl ether (D), ethyl acetate (EAc), and ethanol (E). The activity of the extracts to scavenge the 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH^?) followed the order D > E > EAc > P. Moreover, the antioxidant activity in corn oil at concentrations of 200, 500 and 1000 ppm was monitored through peroxide value and conjugated hydroperoxide measurements and revealed that D and E extracts resulted in the highest protection followed by EAc and P extracts. Increasing the concentration from 200 to 500 ppm depressed peroxide formation, while a further increase had no effect. The main components of the P extract according to GS‐MS analysis were thymol (42.89%) and carvacrol (42.75%). The remaining extracts comprise flavonoids and phenolic acids that provide the antiradical and antioxidant activity.     

Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines

Water‐insoluble polyaspartyl polymers were synthesized by using water as medium instead of organic medium. Taking Ca²⁺ as a reference, the binding of several heavy‐metal ions, including Pb²⁺, Cd²⁺, Hg²⁺, Cr³⁺, Cu²⁺, and Mn²⁺, by polyaspartyl polymers was studied. The experimental results revealed that polyaspartate is an excellent binding agent for the investigated heavy‐metal ions. These cation ions were bound to polyaspartate polymer by the same mechanism as Pb²⁺, which can be explained by ion exchange model. Since polyaspartate has a protein‐resembling structure that is sensitive to trace heavy metal, it was used to remove some trace heavy‐metal elements in Chinese herbal medicines. It was found that polyaspartate material was an effective agent for the removal of Pb²⁺, Cd²⁺, and Hg²⁺ ions from glycyrrhizin, angelica, and gynostemma pentaphyllum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

微生物降解原油发酵液中低分子量有机酸的测定

本文使用气-质联用仪对微生物降解原油发酵液中低分子量有机酸进行测定。采用水蒸汽蒸发法蒸出发酵液中低分子量有机酸，从而使其与样品中大量的无机盐和表面活性剂分离，浓缩后直接进样。该方法简单直接，可以减少有机酸的损失。     

Viscoelastic Behavior, Thermodynamic Compatibility, and Phase Equilibria in Block Copolymer-Based Pressure-Sensitive Adhesives

The viscoelastic behavior, thermodynamic compatibility, and phase equilibria in block copolymer-based pressure-sensitive adhesives were investigated. The block copolymers investigated were: (1) polystyrene-block-polybutadiene-block-polystyrene (SBS) copolymer (KRATON® D-1102, Shell Development Company) and (2) polystyrene-block-polyisoprene-block-polystyrene (SIS) copolymer (KRATON® D-1107, Shell Development Company). The tackifying resins investigated were: (1) WINGTACK® 86 (Goodyear Tire & Rubber Company) and (2) PICCOTAC® 95BHT (Hercules Inc.). Samples of various compositions were prepared by a solution-casting method with toluene as solvent. Measurements of dynamic storage modulus (G'), dynamic loss modulus (G'), and loss tangent (tan δ) were taken, using a Rheometrics Mechanical Spectrometer. It was found that: (1) both WINGTACK 86 and PICCOTAC 95BHT were equally effective in decreasing the plateau modulus (G^O_N), and increasing the glass transition temperature (T_g) of the polyisoprene midblock of KRATON 1107; and (2) WINGTACK 86 was very effective in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102, whereas PICCOTAC 95BHT was not. The observed difference between WINGTACK 86 and PICCOTAC 95BHT in decreasing the G^O_N and increasing the T_g of the polybutadiene midblock of KRATON 1102 (perhaps to SBS block copolymers in general) is explained by the values of the interaction parameter for WINGTACK 86 and KRATON 1102, and for PICCOTAC 95BHT and KRATON 1102. The interaction parameter was determined, using the piezoelectric quartz sorption method. Phase diagrams were constructed for the four block copolymer/tackifying resin systems investigated, using information obtained from both dynamic viscoelastic measurements and optical microscopy. It was found that when mixed with KRATON 1102, PICCOTAC 95BHT formed separate domains whereas WINGTACK 86 did not over the range of concentrations and temperatures investigated. This confirms the evidence obtained from two other independent experimental techniques, namely, dynamic viscoelastic measurements and the piezo-electric sorption method. We have concluded from the present study that PICCOTAC 95BHT is not as an effective tackifying resin as WINGTACK 86, when each is mixed with KRATON 1102. It is pointed out further that information on the order-disorder transition temperature T_r, which was determined from a rheological technique proposed by us, is valuable in determining optimal processing conditions for block copolymer-based pressure-sensitive adhesives.     

Investigation on the properties of a three‐component copolymer consisting of tris(allylphenoxy) triazine monomer and a diamine‐chain‐extension bismaleimide

A new type of modified bismaleimide resin was obtained by copolymerization between tris(allylphenoxy)triazine monomer (TAPT) and an aromatic diamine‐chain‐extension bismaleimide [e.g., 4,4′‐diaminodiphenylmethane (DADPM)‐chain‐extension 4,4′‐bismaleimidodiphenylmethane (BMDPM)]. The new three‐component‐polymer system had good processibility and mechanical properties. Better results were obtained when the weight ratio of TAPT to the DADPM‐chain‐extension BMDPM resin was 30%. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 475–480, 2004     

Duration of slip-resistant shoe usage and the rate of slipping in limited-service restaurants: results from a prospective and crossover study

Several studies have indicated that slip-resistant shoes may have a positive effect on reducing the risk of slips and falls, a leading cause of injury at work. Few studies, however, have examined how duration of shoe usage affects their slip-resistance properties. This study examined the association between the duration of slip-resistant shoes usage and the self-reported rate of slipping in limited-service restaurant workers. A total of 475 workers from 36 limited-service restaurants in the USA were recruited to participate in a 12-week prospective study of workplace slipping. Of the 475 participants, 83 reported changing to a new pair of shoes at least once during the 12-week follow-up. The results show that slip-resistant shoes worn for less than six months were moderately more effective than those worn for more than six months. Changing to a new pair of shoes among those wearing slip-resistant shoes at baseline was associated with a 55% reduction in the rate of slipping (RR = 0.45, 95% CI = 0.23–0.89). Further research is needed to develop criteria for the replacement of slip-resistant shoes.

Practitioner Summary: The duration of usage impacts the slip-resistance properties of slip-resistant shoes. Slip-resistant shoes worn for less than six months were moderately more effective in reducing slips than slip-resistant shoes worn for more than six months. Shoe use policies should not only encourage or require their use but also include guidance on replacing slip-resistant shoes at regular intervals.     

Oil supply between OPEC and non-OPEC based on game theory

The competing strategies between OPEC (Organization of the Petroleum Exporting Countries) and non-OPEC producers make the oil supply market a complex system, and thus, it is very difficult to model and to make predictions. In this paper, we combine the macro-model based on game theory and micro-model to propose a new approach for forecasting oil supply. We take into account the microscopic behaviour in the clearing market and also use the game relationships to adjust oil supplies in our approach. For the supply model, we analyse and consider the different behaviour of non-OPEC and OPEC producers. According to our analysis, limiting the oil supply, and thus maintaining oil price, is the best strategy for OPEC in the low-price scenario, while the rising supply is the best strategy in the high-price scenario. No matter what the oil price is, the dominant strategy for non-OPEC producers is to increase their oil supply. In the high-price scenario, OPEC will try to deplete non-OPEC’s share in the oil supply market, which is to OPEC’s advantage.     

Incremental inconsistency detection with low memory overhead

Ensuring models’ consistency is a key concern when using a model‐based development approach. Therefore, model inconsistency detection has received significant attention over the last years. To be useful, inconsistency detection has to be sound, efficient, and scalable. Incremental detection is one way to achieve efficiency in the presence of large models. In most of the existing approaches, incrementalization is carried out at the expense of the memory consumption that becomes proportional to the model size and the number of consistency rules. In this paper, we propose a new incremental inconsistency detection approach that only consumes a small and model size‐independent amount of memory. It will therefore scale better to projects using large models and many consistency rules. Copyright © 2012 John Wiley & Sons, Ltd.