Analysis of Methods for Parallel Operation of Frequency Converters

Consideration is given to methods for the parallel operation of frequency converters by applying the active load division. The simulation model of the converter is presented. It consists of three parallel independent modules. A new principle of constructing individual modules of a frequency converter and the principle of their communication interface exhibiting resistance to destabilizing effects and allowing safe operation under nominal conditions even with a 5- to 10% range in time and amplitude values of pilot signals are developed.     

金沙江乌东德水电站大坪地滑坡稳定性研究

介绍了大坪地滑坡区的地形地貌与地层岩性,阐述了该滑坡体的变形特征,结合大坪地滑坡的计算模型,分析了库水升降作用对滑坡稳定性的影响,该分析成果将对该库区的滑坡防治提供一定的参考。     

Simulation of one-sided heating of boiler unit membrane-type water walls

This study describes the results of simulation of the temperature field and the stress-strain state of membrane-type gastight water walls of boiler units using the finite element method. The methods of analytical and standard calculation of one-sided heating of fin-tube water walls by a radiative heat flux are analyzed. The methods and software for input data calculation in the finite-element simulation, including thermoelastic moments in welded panels that result from their one-sided heating, are proposed. The method and software modules are used for water wall simulation using ANSYS. The results of simulation of the temperature field, stress field, deformations and displacement of the membrane-type panel for the boiler furnace water wall using the finite-element method, as well as the results of calculation of the panel tube temperature, stresses and deformations using the known methods, are presented. The comparison of the known experimental results on heating and bending by given moments of membrane-type water walls and numerical simulations is performed. It is demonstrated that numerical results agree with high accuracy with the experimental data. The relative temperature difference does not exceed 1%. The relative difference of the experimental fin mutual turning angle caused by one-sided heating by radiative heat flux and the results obtained in the finite element simulation does not exceed 8.5% for nondisplaced fins and 7% for fins with displacement. The same difference for the theoretical results and the simulation using the finite-element method does not exceed 3% and 7.1%, respectively. The proposed method and software modules for simulation of the temperature field and stress-strain state of the water walls are verified and the feasibility of their application in practical design is proven.     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

氧输送管路动态水试仿真分析

利用AMESim软件针对某型运载火箭氧输送管水试试验进行仿真分析,建立无蓄压器和带蓄压器试验系统仿真模型,模拟试验过程中的主要压力变化,并利用软件自带的FFT变换(快速傅立叶变换)获取管路在与水介质耦合作用下的一阶频率和二阶频率。通过对比分析发现,仿真结果与试验结果比较吻合,验证了仿真模型的有效性。     

盾构施工中隧道地层位移与土压力研究

分析了盾构壁后注浆体固化过程的力学性质,阐述了有限元分析法模拟盾尾注浆体的处理方法,对有限元分析法结果进行了分析。     

A New Strategy for Preparation of NiAl Bronze/Zn Composite by Friction Stir Processing

In this work, we successfully prepared a NAB/Zn composite using Zn wires by friction stir processing (FSP). During FSP, Zn-containing α matrix and (Fe, Ni)Al phases and nano α and CuZn grains with the size of less than 10 nm are formed on the top surface. The average microhardness of the composite is increased by 15 pct compared with the alloy without Zn, which originates from fine grains, CuZn particles strengthening, and more β′ phase.

     

Plastic Deformation Resistance of Steel Grades EP450-Sh and EP823-Sh in Hot and Cold State

Metallurgist - The article presents the results of plastometric studies on hot deformation and studies on the hardening curves in cold deformation of EP450-Sh (12H12M1BFR-Sh) and EP823-Sh...     

数据融合技术在变压器状态评估中的应用

电力变压器是电力系统及变电站的最至关重要的设备之一。对电力系统进行运行维护时,监测并预报变压器运行状态并且能够有效地监测并判断变压器的故障情况具有非常现实的意义。基于设备状态信息融合技术,分析了D-S证据理论的基本原理、组合规则和决策过程。通过具体的实例论述了诊断方法的具体可行性,比较了单一诊断方法(只经神经网络判断的结果)与信息融合技术的正确率,并指出信息融合技术的发展优势和可实现性。     

Ensuring Strength in Laser Welds Made Using the Dispersion-Hardened EP693 Nickel Alloy

Russian Journal of Non-Ferrous Metals - The process of making a weld using the heat-resistant EP693 alloy (Ni–Cr–W–Co–Co–Mo system) to make assemblies and components...