（E）-2-壬烯酸合成方法的改进

(E)-2-壬烯酸是有机合成的一种重要中间体,我们利用Knoevenagel反应机理,改进了(E)-2-壬烯酸的合成工艺,在不使用脱水剂条件下,使用少量吡啶作催化剂,获得了83%的反应收率。     

新型饲料泵在熟料窑饲料中的应用

针对熟料饲料油隔泵供料压力不稳定、消耗油及备件量大、检修频繁的情况,着重介绍和探讨了对新型离心泵的选型、可行性分析、过流件材质及密封的选择、新型饲料泵的成功应用.     

Study on Hot Deformation Cracks of Steel D2 Using Procesing Map

ＳｔｕｄｙｏｎＨｏｔＤｅｆｏｒｍａｔｉｏｎＣｒａｃｋｓｏｆＳｔｅｅｌＤ２ＵｓｉｎｇＰｒｏｃｅｓｉｎｇＭａｐＧａｏＳｈａｎ，ＬｉｕＸｉａｎｇｈｕａ，ＷａｎｇＧｕｏｄｏｎｇＡＢＳＴＲＡＣＴＴｈｅｈｏｔｄｅｆｏｒｍａｔｉｏｎｂｅｈａｖｉｏｒｓｏｆｓｔｅｅｌ...     

空调器用盘式电机的计算机模拟

介绍线绕盘式永磁直流电流电动机的结构特点，设计原则和有关的主要设计公式，并进行电机的计算机模拟。模拟运行结果与样机实测数据基本相符。     

Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

肝癌碘油栓塞后肝区平片所见碘油沉积量与疗效关系

本文分析了90例肝癌肝动脉灌注化疗碘油栓塞后,肝区平片所见碘油沉积量和疗效的关系。碘油沉积分为多,中,少三组,从ATP下降,肿瘤缩小率及一年生存率三方面比较。结果沉积多的与中等组三项都有显著差别;沉积中等的与少的组差别不明显。说明碘油沉积要达到一定的量后,疗效才会显著提高。同时分析了影响碘油沉积的几个因素。     

The beta 1 integrin, very late activation antigen-4 on human neutrophils can contribute to neutrophil migration through connective tissue fibroblast barriers

Polymorphonuclear leucocyte (PMNL) accumulation in extravascular tissues and inflammatory exudates is dependent on their migration through blood vessel endothelium and then through connective tissue. Previously we utilized a barrier of human synovial and dermal fibroblasts (HSF or HDF) grown on microporous filters, as a model of PMNL migration through connective tissue. Those studies showed that beta 2 (CD18) and the beta 1 integrins, very late activation antigen-5 (VLA-5) and VLA-6, in part mediate this PMNL migration. Here we report that VLA-4, which can also be expressed at low levels on activated PMNL, is also involved in PMNL migration induced by C5a through fibroblast (HSF and HDF) barriers, because monoclonal antibody (mAb) to VLA-4 significantly inhibited (by 20-30%) PMNL migration. Blocking the function of CD18, VLA-5 or VLA-6 was not required for detection of the VLA-4-mediated migration. Combination treatment with mAb to VLA-4 and with mAb to VLA-5 or to VLA-6 further inhibited PMNL migration, irrespective of whether CD11/CD18 mechanisms were blocked with anti-CD18 mAb or not. Treatment of PMNL with a peptide based on the VLA-4-binding domain in the CS-1 fragment of fibronectin, but not a control peptide, inhibited PMNL migration to a comparable extent to treatment with mAb to VLA-4. A low level of VLA-4 was expressed on C5a-activated PMNL, detected by immunofluorescence flow cytometry. These results suggest that VLA-4 can be mobilized by human peripheral blood PMNL and can, in addition to VLA-5, VLA-6 and CD11/CD18 integrins, mediate PMNL migration through connective tissue. This is in marked contrast to PMNL transendothelial migration, where beta 1 integrins appear to play no significant role.     

广义杠杆规则及其在配方计算中的应用

作者将相图中的一维杠杆规则推广至多元配料系统而成为广义杠杆规则，并利用这一规则对配方计算中解的可行域问题进行了深入的讨论，给出了几何解释及工艺诠释，对配方设计有一定的指导作用。     

Dynamic lithium-ion battery model for system simulation

Presents here a complete dynamic model of a lithium ion battery that is suitable for virtual-prototyping of portable battery-powered systems. The model accounts for nonlinear equilibrium potentials, rate- and temperature-dependencies, thermal effects and response to transient power demand. The model is based on publicly available data such as the manufacturers' data sheets. The Sony US18650 is used as an example. The model output agrees both with manufacturer's data and with experimental results. The model can be easily modified to fit data from different batteries and can be extended for wide dynamic ranges of different temperatures and current rates.