Effect of Radio Frequency Postdrying of Partially Baked Cookies on Acrylamide Content,Texture, and Color of the Final Product

Abstract: Effect of radio frequency (RF) postdrying of partially baked cookies on acrylamide content, texture, and color of the final product was investigated in this study. Control cookies were prepared by baking in a conventional oven at 205 °C for 11 min. Cookies partially baked for 8 and 9 min were postdried in a 27.12 MHz RF tunnel oven until attainment of the moisture content of control cookies. Internal temperature of cookies was monitored during the experiments to better explain the results. Cookies were analyzed for acrylamide content using a liquid chromatography‐mass spectrometry (LC‐MS) method. Texture measurements were performed using a Texture Analyzer, while digital image analysis was used for color measurement. The results showed that RF postdrying of partially baked cookies resulted in lower acrylamide levels (107.3 ng/g for control cookies, 74.6 ng/g upon RF postdrying of cookies partially baked for 9 min, 51.1 ng/g upon RF postdrying of cookies partially baked for 8 min). Instrumental texture analysis showed no significant difference among the texture of cookies, whereas RF postdried samples had a lower degree of browning. According to sensory evaluation results, control had a more crumbly texture, and RF postdried sample that was conventionally baked for 8 min had a slightly uncooked flavor. Practical Application: Combining radio frequency and conventional baking may provide cookie manufacturers with ability to make cookies with lower levels of acrylamide.     

Expression and Characterization of a New Self-Sufficient P450 Monooxygenase (P450 AZC1) from Azorhizobium caulinodans

Oxyfunctionalization of non-activated carbon bonds by P450 monooxygenases has drawn great industrial attraction. Self-sufficient P450s containing catalytic heme and reductase domains in a single polypeptide chain offer many advantages since they do not require external electron transfer partners. Here, we report the first P450 enzyme identified and expressed from Azorhizobium caulinodans. Firstly, expression conditions of P450 AZC1 were optimized for enhanced expression in E.coli. The highest P450 content was obtained in E.coli Rosetta DE3 plysS when it was incubated in TB media supplemented with 0.75 mM IPTG, 0.5 mM ALA, and 0.75 mM FeCl₃ at 25 °C for 24 hours. Subsequently, the purified enzyme showed a broad substrate spectrum including fatty acids, linear and cyclic alkanes, aromatics, and pharmaceuticals. Finally, P450 AZC1 showed optimal activity at pH 6.0 and 40 °C and a broad pH and temperature profile, making it a promising candidate for industrial applications.     

Morphology,Thermal and Mechanical Properties of Biodegradable Poly(butylene succinate)/Poly(butylene adipate-co-terephthalate)/Clay Nanocomposites

Sodium montmorillonite (Na-MMT) was successfully modified by octadecylamine (ODA) through a cation exchange technique that showed by the increased of basal spacing of clay by XRD. The addition of the organoclay into the PBS/PBAT blends produced intercalated-type nanocomposites with improvements in tensile modulus and strength. The highest tensile strength of nanocomposite was observed at 1 wt% of organoclay incorporated. A TGA study showed that the thermal stability of the blend increased after the addition of the organoclay by 1 wt%. SEM micrographs of the fracture surfaces show that the morphology of the blend becomes smoother with presence of organoclay.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Sulfurized Co-Mo Alloy Thin Films as Efficient Electrocatalysts for Hydrogen Evolution Reaction

Catalysis Letters - Here, we successfully fabricated sulfurized Co-Mo alloy thin film electrodes with different compositions and studied their catalytic properties for hydrogen evolution reaction...     

Synthesis and characterization of side‐chain liquid‐crystalline polyacrylates containing azobenzene moieties

Syntheses of novel liquid‐crystalline polymers containing azobenzene moieties were performed by a convenient route with an acrylate backbone. The azobenzenes were key intermediates of the monomers, and side‐chain liquid‐crystalline polymers were prepared, that is, poly[α‐{4‐[(4‐acetylphenyl)azo]phenoxy}alkyloxy]acrylates, for which the spacer length was 3 or 11 methylene units. In addition, poly[3‐{4‐[(3,5‐dimethylphenyl)azo]phenoxy}propyloxy]acrylate was prepared with a spacer length of 3 methylene units. The structures of the precursors, monomers, and polymers were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR techniques. The polymers were obtained by conventional free‐radical polymerization with 2,2′‐azobisisobutyronitrile as an initiator. The phase‐transition temperatures of the polymers were studied with differential scanning calorimetry, and the phase structures were evaluated with a polarizing optical microscopy technique. The results showed that two of the monomers and their corresponding polymers exhibited nematic liquid‐crystalline behavior, and one of the monomers and its corresponding polymer showed smectic liquid‐crystalline behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2653–2661, 2002     

Reinforcement of graphene nanoplatelets on plasticized poly(lactic acid) nanocomposites: Mechanical,thermal, morphology,and antibacterial properties

Plasticized poly(lactic acid) (PLA)‐based nanocomposites filled with graphene nanoplatelets (xGnP) and containing poly(ethylene glycol) (PEG) and epoxidized palm oil (EPO) with ratio 2 : 1 (2P : 1E) as hybrid plasticizer were prepared by melt blending method. The key objective is to take advantage of plasticization to increase the material ductility while preserving valuable stiffness, strength, and toughness via addition of xGnP. The tensile modulus of PLA/2P : 1E/0.1 wt % xGnP was substantially improved (30%) with strength and elasticity maintained, as compared to plasticized PLA. TGA analysis revealed that the xGnP was capable of acting as barrier to reduce thermal diffusion across the plasticized PLA matrix, and thus enhanced thermal stability of the plasticized PLA. Incorporation of xGnP also enhanced antimicrobial activity of nanocomposites toward Escherichia coli, Salmonella typhimurium, Staphylococcus aureus, and Listeria monocytogenes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41652.     

Single‐step fabrication of an anode supported planar single‐chamber solid oxide fuel cell

We present single‐step‐co‐sintering manufacture of a planar single‐chamber solid oxide fuel cell (SC‐SOFC) with porous multilayer structures consisting of NiO/CGO, CGO and CGO‐LSCF as anode, electrolyte, and cathode, respectively. Their green tapes were casted with 20 μm thickness and stacked into layers of anode, electrolyte, and cathode (10:2:2), then hot‐pressed at 2 MPa and 60°C for 5 minutes (deemed optimal). Subsequently, hot laminated layers were cut into 40 × 40 mm cells and co‐sintered up to 1200°C via different sintering profiles. Shrinkage behavior and curvature developments of cells were characterized, determining the best sintering profile. Hence, anode‐supported SC‐SOFCs were fabricated via a single‐step co‐sintering process, albeit with curvature formation at edges. Subsequently, anode thickness was increased to 800 μm and electrolyte reduced to 20 μm to obtain SOFCs with drastically reduced curvature with the help of a porous alumina cover plate.     

Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles

This study investigates the effects of calcium carbonate (CaCO(3)) nanoparticles on the mechanical and thermal properties and surface morphology of polycaprolactone (PCL)/chitosan nanocomposites. The nanocomposites of PCL/chitosan/CaCO(3) were prepared using a melt blending technique. Transmission electron microscopy (TEM) results indicate the average size of nanoparticles to be approximately 62 nm. Tensile measurement results show an increase in the tensile modulus with CaCO(3) nanoparticle loading. Tensile strength and elongation at break show gradual improvement with the addition of up to 1 wt% of nano-sized CaCO(3). Decreasing performance of these properties is observed for loading of more than 1 wt% of nano-sized CaCO(3). The thermal stability was best enhanced at 1 wt% of CaCO(3) nanoparticle loading. The fractured surface morphology of the PCL/chitosan blend becomes more stretched and homogeneous in PCL/chitosan/CaCO(3) nanocomposite. TEM micrograph displays good dispersion of CaCO(3) at lower nanoparticle loading within the matrix.