柴达木盐湖产业生态文明建设战略研究

盐湖产业事关我国粮食安全,也是新能源和新材料产业的重要支撑。柴达木盆地是中国盐湖产业的核心,建设其产业生态文明重要而迫切。为推进柴达木盐湖产业生态文明建设,做强中国盐湖产业,本文从柴达木盐湖产业生态文明建设的现状出发,辨识产业生态文明建设面临的严峻挑战,提出了盐湖产业生态文明建设的四大战略。     

Study on the void reduction behaviour of porous asphalt pavement based on discrete element method

The objective of this study was to analyse the void reduction behaviour of porous asphalt mixture under load. A three-dimensional discrete element model of porous asphalt mixture based on aggregate gradation and void gradation was built in PFC3D software. The parameter of the model was obtained from creep test. The rutting test was simulated using this discrete element model. And a new method was developed to obtain and analyse the void structure in discrete element model. The simulation results were compared with one of the laboratory test. The comparative analysis indicates that, the discrete element method can be used to simulate the creep response and void reduction behaviour of porous asphalt mixture. Further research shows that porosity, effective porosity, number of connected components and section pores have a good correlation with strain of porous asphalt mixture. With the increase in strain, the proportion of section pores with diameter less than 2 mm increases. In the initial stage of loading, the void reduction is the main reason for rut increment of porous asphalt mixture. In the later stage, the void structure is almost incompressible; the lateral deformation of mixture becomes the domination factor.     

Tungsten wires and porous NiAl prepared through directional solidification and selective dissolution

The combination of directional solidification and selective dissolution was applied to fabricate tungsten (W) wires and porous NiAl matrix. A NiAl–W pseudobinary eutectic alloy with 1.5?at.% tungsten was directionally solidified in a Bridgman-type oven at 1700°C. Results confirmed that the relationships of the growth rate with the interfibrous spacing and diameter of W fibrous phases in the directionally solidified samples are in accordance with the Jackson and Hunt (J?H) model. Afterward, the NiAl matrix was selectively dissolved in an HCl:H₂O₂ solution to reveal W wires, which present various three-dimensional (3D) morphologies at different growth rates. The W fibrous phases in the NiAl–W alloy samples were then selectively removed with a mixed etchant of ammonium acetate to form a porous NiAl matrix at a constant potential. Dynamic corrosion curves revealed that etching W from the NiAl matrix was inhibited after 2–3?h. The porous structures of NiAl after removing W phases are linked to the 3D morphologies of W fibrous phases embedded in the NiAl matrix. The aspect ratio of W wires and the structures of porous NiAl can be adjusted by selecting the process parameters of this combined technology.     

Experimental modelling of free-surface dry granular flows under a centrifugal acceleration field

We investigate the dynamics of granular flows under the action of a centrifugal acceleration field. The granular flows consist of a monodisperse set of glass beads flowing down an inclined plane. The experiments are performed at variable slope angles \(\zeta \) and equivalent centrifugal accelerations \(a_\text {cf}\equiv Ng\). We study the effect of this parameters on the superficial flow velocity u and flow height h. Two trends are observed, by increasing \(\zeta \) and \(a_\text {cf}\), u increases proportionally, and h decreases asymptotically until a constant height. This relation is analysed in terms of the system potential and kinetic energy, leading to the estimation of equivalent impact forces one order of magnitude larger than those observed in small scale 1g laboratory experiments, with the possibility to reach higher forces by increasing N. Finally, considering the trend of u and h, our results suggest a scaling principle of inertial velocity proportional to \(\sqrt{N}\).     

Electrochemical stripping features of graphite and its products characterization

A stable dispersion in mixed solvent of water and N,N-dimethyl formamide (DMF) of graphene was synthesized by one-step electrochemical approach. Here we demonstrate about electrochemical stripping graphite to prepare graphene influence by different electrolytes. The physical and chemical properties of the stripping product had been characterized by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometer (UV-Vis), Scanning electron microscopy (SEM), Transmission Electron Microscope (TEM) . The characteristic results of XRD showed that it could improve the efficiency of graphite stripping when H₂SO₄ was used as electrolyte mother liquid and amount of HNO₃ was doped in electrolyte; XPS and FTIR results indicate that the electrochemical stripping products preserve the intrinsic structure of graphene. The results of SEM and TEM shown that the surface morphology of the as-prepared graphene was folded lamellar structure and have good transparency;its thickness varies from 0.8 nm to a few nanometers.     

Structure and Magnetic Properties of Ce-Substituted Yttrium Iron Garnet Prepared by Conventional Sintering Techniques

Y_3?xCe _x Fe₅ O ₁₂ (CeYIG) ceramics, with x = 0, 0.15, 0.25, 0.35, 0.45, and 0.5, were fabricated by a conventional ceramic sintering technique. We studied the structures and magnetic fields of a series of CeYIG ceramics using X-ray powder diffraction, a scanning electron microscope, and a superconducting quantum interference device magnetometer. Findings showed that the substitution limit of the concentration of Ce³⁺ ions in the yttrium iron garnet structure was approximately x = 0.25. An extra CeO₂ phase was detected in the ceramic when the addition of CeO₂ content overtook the limit. The lattice constants and relative densities increased by increasing the Ce³⁺ contents in the ceramics. First, the saturation magnetization increased gradually with increases in the substitute concentration of Ce³⁺ ions and then decreased gradually when x = 0.35, 0.45, and 0.5. Overall, this study showed that the Y_3?xCe _x Fe₅ O ₁₂ material with x ≤ 0.15 exhibited excellent magnetic properties. Hence, the material show promise for magneto-optical and microwave communication applications.     

Plasmon‐Enhanced Spectroscopies with Shell‐Isolated Nanoparticles

Shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS), due to its versatility, has been able to break the long‐term limitations of the material‐ and substrate‐specific generalities in the traditional field of surface‐enhanced Raman spectroscopy. With a shell‐isolated work principle, this method provides an opportunity to investigate successfully in surface, biological systems, energetic materials, and environmental sciences. Both the shell material and core morphology are being improved continuously to meet the requirements in diverse systems, such as the electrochemical studies at single crystal electrode surfaces, in situ monitoring of photoinduced reaction processes, practical applications in energy conversion and storage, inspections in food safety, and the surface‐enhanced fluorescence. Predictably, the concept of shell‐isolated nanoparticle‐enhancement could be expanded to the wider range for the performance of plasmon‐enhanced spectral modifications.