铜冶炼含砷固体废物的处置现状与展望

随着国内经济的高速发展,从采矿、选矿、冶炼过程中富集到环境中的砷量急剧增加,高砷固废的处置总的原则是"资源化、无害化、减量化",最佳方向是转变成产品,新型药品、有机化,环保建材、高纯砷金属、高端电导体材料等是发展的新方向。     

Interpretation of Dynamic Strain Aging in an Intercritical Annealed Steel by Dislocation Multiplication Induced by Martensitic Transformation

Metallurgical and Materials Transactions A - To elucidate the dynamic strain aging (DSA) mechanism that causes serrated flow in the tensile curves of an intercritical annealed steel with retained...     

Accurate measurement of residual stresses of 2219-T87 aluminum alloy friction stir welding joints based on properties of joints

In order to avoid the deviation caused by calculating the residual stresses of welding joints with the release coefficients of the same parent metal, a new method has been proposed based on the properties of weld joints. Since the mechanical property of 2195-F Al alloy is close to that of 2219-T87 Al alloy Friction stir welding (FSW) joint, 2195-F Al alloy is selected as the substitute material of 2219-T87 Al alloy FSW joint in the calibration test. Release coefficients of 2195-F Al alloy and proper correction coefficient are used to calculate the residual stresses of 2219-T87 Al alloy FSW joints. Compared to the results calculated with release coefficients of its parent metal, it has been proved that the proposed correction method is more precise in residual stresses measurement of weld joints. The mathematical analysis and the results of verification tests have shown that this new method is reliable, and it will provide guidance in academic research and engineering application of the spherical indentation strain-gauge method.     

钛铁矿机械活化-稀酸酸解反应耦合

采用稀酸酸解反应工艺,利用机械活化-稀酸酸解反应耦合技术,在磁驱转动的球磨反应装置上进行了钛铁矿的酸解反应。考察了反应器旋转速率、酸矿比、球料比及硫酸浓度等对酸解反应的影响。结果表明,在硫酸质量分数为60%、酸矿比1.6:1、球料比10:1及反应温度90℃条件下,与原矿浸出反应空白实验相比,采用活化-浸出耦合反应的浸出速率明显提高,浸出2 h酸解率从32%提高到49%,所得钛液的稳定性大于450 mL。扫描电镜(SEM)及X射线衍射(XRD)表征结果表明,耦合反应使得矿物颗粒不断破碎、细化和脱落,使剩余未活化芯继续活化并不断反应浸出。     

Coloration and Nonlinear Optical Properties of ZnTe Quantum Dots in ZnO–TeO2–P2O5 Glasses

ZnO–TeO₂–P₂O₅ glasses were prepared by melt‐quenching method. The color of the glass samples changed from colorless to pale red and dark red with increasing TeO₂ content. Coloration mechanism and nonlinear optical properties of ZnO–TeO₂–P₂O₅ glasses have been investigated. Raman spectra and transmission electron microscope measurements indicated the precipitation of ZnTe quantum dots in the glasses and ZnTe quantum dots are the origin of coloration. Z‐scan technique was used to examine the nonlinear optical properties of the glasses. The glass sample with 30 mol% TeO₂ exhibits large third‐order nonlinear optical susceptibility of 10^?11 esu.     

A new method to improve the stability,tensile strength,and heat resistant properties of shape‐memory epoxy resins: Two‐stages curing

In this article, we design a new thermal curing method: two‐stage curing. The purpose of using this approach is to maintain the excellent shape‐memory property of epoxy resin system after first stage curing, and the material can be folded in small size to storage or transportation and recovery its original shape commodiously by heating temperature. Then, after second stage curing, the stability, glass transition temperature(T_g), and tensile strength of material can be improved effectively. For this aim, a series of mixtures have been prepared. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), tensile test, scanning electron microscope (SEM), dynamic mechanical analysis (DMA), and fold‐deploy shape‐memory test have been used to characterize the feasibility of two‐stage curing process, curing degree, tensile strength, morphology, thermodynamic properties, and shape‐memory performance of these polymers. DSC results show that two independent curing stages can be achieved successfully. Tensile tests and DMA results suggest that tensile strength and heat resistance have been improved after the second curing stage. SEM results reveal that the addition of latent curing agent do not change the fracture mechanism. Furthermore, the fold‐deploy shape‐memory tests prove that the composites after first stage curing possess eximious shape‐memory property. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39882.     

A physical strategy for the preparation of isotactic polypropylene spheres with microsphere and bead–string spherulite morphologies

This study mainly focuses on the formation of isotactic polypropylene (iPP) blend morphologies with microspheres and distinct bead–string spherulites. iPP microspheres have been prepared by a simple and convenient strategy through either an isothermal or a nonisothermal crystallization process based on the macrophase‐separated structure in molten state of iPP/olefin block copolymer (OBC) blend. The dimension of the iPP spheres can be adjusted easily from about 1 µm to >10 µm by controlling the compatibility and annealing conditions. It was found that any of the following three parameters, the molecular structure of OBC (particularly the octene content), molecular weight of iPP, and annealing condition can be rescaled with others in controlling the dimension of the iPP microspheres. The mechanism of the formation of iPP microspheres was studied in detail. Surprisingly, the typical spinodal decomposition morphology with interconnected or thin sheet structure is the precursor of these microspheres. During the subsequent annealing process, it breaks up and further coarsens into spherical structure. In addition, distinct spherulites with a bead–string substructure have been obtained during the isothermal crystallization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40863.     

Solvent diffusion in silica/poly[styrene‐co‐(acrylic acid)] core‐shell microspheres by pulsed field gradient NMR techniques

Polymer‐coated SiO₂ particles are prepared by precipitation of poly[styrene‐co‐(acrylic acid)] on SiO₂ microspheres through an improved phase inversion method. The diffusion resistance of the polymer membrane was considered to be the critical reason for producing tailor‐made polyethylene by catalysts supported on these polymer‐coated particles. This paper employs pulsed field gradient NMR (PFG‐NMR) to distinguish diffusion of n‐hexane in different regimes, i.e., in the space between each particle, the pores in SiO₂ and the polymer shell, by their respective diffusion coefficients. By varying the observation time, the time scale of the molecular exchange is discussed. A three‐region ansatz was used to interpret the exchange and diffusion in polymer‐coated SiO₂ system, and was compared with results acquired with noncoated particles. At long diffusion times, the mean‐squared displacement, and thus the averaged self‐diffusion coefficient, of hexane in the system of polymer‐coated SiO₂ particles is significantly reduced. The PSA membrane is identified as an efficient barrier against molecular exchange between the pores in SiO₂ and the intraparticle space. Consistently, the relaxation measurements indicated that the mobility of n‐hexane molecules, especially the rotation of n‐hexane, was limited by the PSA membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Light scattering of ideal random copolymers in bulk

Copolymerization is a useful way of modifying the physical properties of a material to meet specific needs, but it can result in a significant light scattering loss due to dielectric fluctuations in the material. Ideal random copolymers are known to be more transparent; however, the light-scattering properties of such copolymers in bulk have not been fully studied. In this paper, two representative ideal random copolymers were synthesized: methyl methacrylate (MMA)/benzyl methacrylate (BzMA) and MMA/2,2,2-trifluoroethyl methacrylate (TFEMA). The effects of copolymer composition and polymerization temperature on the light-scattering properties were investigated. Polarized light scattering (V_V) in copolymers was more sensitive to the polymerization temperature. Higher temperatures were necessary to homogenize the dielectric fluctuations and minimize excess light scattering. However, once the heterogeneous structures vanished, the copolymer bulk exhibited low scattering losses, which are comparable with homopolymers, over the entire range of copolymer compositions.