Chemical functionalization of carbon nanotubes for the mechanical reinforcement of polystyrene composites

An organometallic approach was used to functionalize multiwalled carbon nanotubes with n-butyllithium. This procedure was repeated two more times to achieve a higher degree of multiwalled carbon nanotube functionalization. The functionalized nanotubes have been characterized by Fourier transform infrared and Raman spectroscopy, thermogravimetrical analysis, scanning electron microscopy and sedimentation studies. It was possible to form stable suspensions of the functionalized nanotubes in tetrahydrofuran and they were used to make nanotube polymer composites. The mechanical properties of these new nanotube polymer composites were tested and they were found to show an increase of up to 25% in their Young's moduli and up to 50% in their tensile strength over pure polystyrene.     

High-yield production of graphene by liquid-phase exfoliation of graphite

Fully exploiting the properties of graphene will require a method for the mass production of this remarkable material. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This is possible because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energies match that of graphene. We confirm the presence of individual graphene sheets by Raman spectroscopy, transmission electron microscopy and electron diffraction. Our method results in a monolayer yield of approximately 1 wt%, which could potentially be improved to 7-12 wt% with further processing. The absence of defects or oxides is confirmed by X-ray photoelectron, infrared and Raman spectroscopies. We are able to produce semi-transparent conducting films and conducting composites. Solution processing of graphene opens up a range of potential large-area applications, from device and sensor fabrication to liquid-phase chemistry.     

Nonfunctionalized nanocrystals can exploit a cell's active transport machinery delivering them to specific nuclear and cytoplasmic compartments

We use high content cell analysis, live cell fluorescent imaging, and transmission electron microscopy approaches combined with inhibitors of cellular transport and nuclear import to conduct a systematic study of the mechanism of interaction of nonfunctionalized quantum dots (QDs) with live human blood monocyte-derived primary macrophages and cell lines of phagocytic, epithelial, and endothelial nature. Live human macrophages are shown to be able to rapidly uptake and accumulate QDs in distinct cellular compartment specifically to QDs size and charge. We show that the smallest QDs specifically target histones in cell nuclei and nucleoli by a multistep process involving endocytosis, active cytoplasmic transport, and entering the nucleus via nuclear pore complexes. Treatment of the cells with an anti-microtubule agent nocodazole precludes QDs cytoplasmic transport whereas a nuclear import inhibitor thapsigargin blocks QD import into the nucleus. These results demonstrate that the nonfunctionalized QDs exploit the cell's active transport machineries for delivery to specific intranuclear destinations.     

Nanomaterials for Heterogeneous Combustion

Nanophase materials and nanocomposites, characterized by an ultra fine grain size (less than 100 nm) have attracted wide spread interest in recent years by virtue of their unusual mechanical, electrical, optical, magnetic, and energetic properties. Studies have shown that the thermal behavior of nano‐scaled materials is quite different from micron‐sized powders. Nanosized metallic and explosive powders have been used as solid propellant and explosive mixtures to increase efficiency. At the same time recent studies reveal that the presence of nanosized metals in propellants does not necessary translate into an increased burning rate and burning temperature. The reasons of this effect are far from being clear. This paper presents a new approach to the production of nanocomposites of some energetic materials – ammonium nitrite, cyclotrimethylene trinitramine (RDX), and aluminum – by the vacuum co‐deposition technique. The thermal behavior of the synthesized nanopowder and nanocomposites is investigated. A substantial difference in burning rate of RDX nanopowder has been found in comparison to micron‐sized material. Experimental results allow investigating the effects of nanosized materials on the combustion characteristics.     

Twenty years later

Strength and Plasticity

Twenty years later     

Emission properties of colloidal quantum dots on polyelectrolyte multilayers

We present steady state and time-resolved photoluminescence (PL) characteristics of differently charged CdTe quantum dots (QDs) adsorbed onto a polyelectrolyte (PE) multilayer. The PE multilayer is built up using a layer-by-layer assembly technique. We find that the diffusion of the QDs into the PE multilayer is an important factor in the case of 3-mercapto-1, 2-propanediol stabilized QDs (neutral surface charge), resulting in a ～31-fold enhancement in PL intensity accompanied by a blue shift in the PL spectra and an increase in decay lifetime from 3.74?ns to a maximum of 11.65?ns. These modified emission properties are attributed to the enhanced surface related emission resulting from the interaction of the QD's surface with the PE. We find that diffusion does not occur for thioglycolic acid (TGA) stabilized QDs (negative surface charge) or 2-mercaptoethylamine stabilized QDs (positive surface charge), indicating localization of the QDs on top of the PE multilayer. However, the PL lifetime of the TGA stabilized QDs decreases from 9.58 to 5.78?ns with increasing PE multilayer thickness. This provides evidence for increased intrinsic exciton recombination relative to surface related emission, which results in an overall reduction in the average lifetime. Our studies indicate the importance of the QD surface charge in determining the interaction with the PE multilayers and the subsequent modification of the QD emission properties.     

Theoretical limit of localized surface plasmon resonance sensitivity to local refractive index change and its comparison to conventional surface plasmon resonance sensor

In this paper, the theoretical sensitivity limit of the localized surface plasmon resonance (LSPR) to the surrounding dielectric environment is discussed. The presented theoretical analysis of the LSPR phenomenon is based on perturbation theory. Derived results can be further simplified assuming quasistatic limit. The developed theory shows that LSPR has a detection capability limit independent of the particle shape or arrangement. For a given structure, sensitivity is directly proportional to the resonance wavelength and depends on the fraction of the electromagnetic energy confined within the sensing volume. This fraction is always less than unity; therefore, one should not expect to find an optimized nanofeature geometry with a dramatic increase in sensitivity at a given wavelength. All theoretical results are supported by finite-difference time-domain calculations for gold nanoparticles of different geometries (rings, split rings, paired rings, and ring sandwiches). Numerical sensitivity calculations based on the shift of the extinction peak are in good agreement with values estimated by perturbation theory. Numerical analysis shows that, for thin (≤10 nm) analyte layers, sensitivity of the LSPR is comparable with a traditional surface plasmon resonance sensor and LSPR has the potential to be significantly less sensitive to temperature fluctuations.     

Cycling stability of RNi5 (R = La,La+Ce) hydrides during the operation of metal hydride hydrogen compressor

This work presents results of the experimental studies (XRD, SEM, PCT) of hydride forming intermetallides used in the first (LaNi₅) and the second (La_0.5Ce_0.5Ni₅) stages of industrial-scale metal hydride hydrogen compressor providing H₂ compression from 3.5 to 150 atm with the productivity about 10 Nm³/h. During the operation, both materials underwent 18,180 hydrogenation/dehydrogenation (h/d) cycles which included H₂ absorption at the pressure of 3.5 atm (LaNi₅) and 35–38 atm (La_0.5Ce_0.5Ni₅) at T = 15–20 °C followed by H₂ desorption at the pressure of 35–38 atm (LaNi₅) and 150 atm (La_0.5Ce_0.5Ni₅) at T = 150–160 °C. It was found that the observed ～30% drop of the productivity of the compressor by the end of its operation is associated with a degradation of the first stage hydride material (LaNi₅) under conditions specified above. The cycling resulted in the appearance of Ni and LaH_2+x phases in addition to the parent intermetallide. In turn, the cycled LaNi₅ exhibited more than 20% lower hydrogen storage capacity than the alloy at the beginning of the cycling; the cycling was also found to result in a noticeable sloping of initially flat plateau. Conversely, the degradation effects in La_0.5Ce_0.5Ni₅ were found to be much less pronounced, in spite of the higher operating H₂ pressures. The observed effect was associated with the decrease of thermodynamic driving force (TDF) of AB₅ disproportionation in H₂ when substituting La with Ce.