燃煤MHD发电Cr25Al5电极材料的腐蚀行为研究

采用Ｃｒ＿（２５）Ａｌ＿５合金进行煤渣／种子条件下静态腐蚀试验（温度１３７３－１５７３ｋ，时间５０－１５０ｈｒ），试验后得出三种温度下腐蚀重量变化与腐蚀时间的关系，并借助金相显微镜、扫描电镜和俄歇分析进行有关形貌及成份分析，试验表明，温度是材料腐蚀的主要因素，在１４７３ｋ条件下材料的抗蚀性最好，Ａｌ、Ｓｉ元素在腐蚀过渡层中富集，Ｃｒ元素变化不大，但有从基体向外扩散的趋势。由此，这一材料若能进一步改进，可望在控制壁面温度的半热壁型通道中进行试验研究。     

过共晶铝硅合金细化初晶硅的研究

研究了ZL8604过共晶铝硅合金初晶硅细化剂和加入方式与加入量以及影响细化效果的冶铸工艺因素,实验结果达到了技术指标要求。     

Dependence of ion-pair induced self-pulsing in Er-doped fiber lasers on emission to absorption ratio

We show theoretically that the ion-pair induced self-pulsing in Er-doped fiber lasers depends largely on the ratio of emission to absorption cross sections, and can be significantly suppressed as this ratio is increased. Our experimental results agree qualitatively with this prediction. This result is important for stabilizing Er-doped fiber lasers where short-cavities and high-gain fibers are required.     

氧化铝丝的研制

氧化铅丝生产过程中最关键的工艺是连续阳极氧化。氧化膜击穿电压决定于氧化膜厚度。控制膜厚度的三要素为:电解液(成份、浓度及温度),槽电压和铝丝走速。     

建筑构件积木式CAD软件研究

西方以混凝土坝内廓道施工样图设计阶段为例，论述水工建筑件积木式ＣＡＤ软件的必要性和积木模块ＣＡＤ软件的具体实现方法。     

强化乙烯生产管理提升企业竞争能力

回顾了中国石油天然气股份公司所属乙烯装置2002年的生产情况，总结了乙烯生产管理中取得的经验和存在的问题，并提出了今后乙烯生产管理的目标。     

广义物质平衡计算在凝析气藏开采动态预测中的应用

从经济的角度考虑 ,对小型凝析气藏衰竭式开采动态的预测往往不必或不值得进行数值模拟研究。常规物质平衡 (黑油 )计算方法只局限于黑油和干气藏 ,应用于凝析气藏则存在很大的误差。Walsh提出的广义物质平衡计算方法 ,可用于包括黑油、干气藏、挥发油气藏和凝析气藏在内的所有油气藏。文中将一个小型凝析气藏衰竭式开采动态的数值模拟结果与广义物质平衡计算结果进行了对比 ,结果表明 ,Walsh方法简便、应用更广泛 ,可用于规模较小、不适合进行数值模拟研究的凝析气藏的现场开发优化。     

Transmission loss allocation based on a new quadratic loss expression

This paper presents a derivation of a new quadratic expression for the transmission loss in a power system. The main advantage of this expression is the improvement in accuracy over the other existing approximations. Furthermore, this improved quadratic form allows the transmission loss to be expressed in terms of nodal power injections. This paper builds on the derived loss expression and proposes a bus-loss matrix. This matrix is useful in quantifying the interactions among different bus power injections and establishing a loss allocation scheme for individual buses. Numerical examples are used to illustrate the accuracy of the derived quadratic form and its use in loss allocation.