Electrical and photovoltaic properties of an organic-inorganic heterojunction based on a BODIPY dye

An organic-inorganic heterojunction based on a BODIPY dyes has been produced by forming dye thin film on n-Si. The electrical parameters of the structure have been investigated by current-voltage (I-V) and capacitance-voltage (C-V) measurements. The ideality factor, the barrier height and the series resistance values of the diode have been calculated as 2.43, 0.84 eV, and about 1.3 kΩ, respectively. The diode behaves as a non-ideal diode because of the series resistance and interface layer. The barrier height value obtained from I-V measurement has been compared with one from C-V measurement. Moreover, it has been seen that the diode is highly sensitive to the light and the reverse bias current increases about 1 × 10⁴ times at −1 V under 100 mW/cm² and AM1.5 illumination condition. The short photocurrent density (J_sc) and the open circuit voltage (V_oc), the fill factor (FF) and power conversion efficiency (η) have been determined as 3.78 mA/cm², 327 mV, 0.28 and 0.48 %, respectively.     

Functional polyamides. 3. Synthesis and chelating properties of a new poly(amide thioether)

Polymerization of β,β′-(ethylenedithio)dipropionitrile

1 IUPAC name: 4,7-dithiadecane dinitrile.

with formaldehyde in the presence of sulfuric acid was carried out in order to permit the synthesis of polymides containing thioether groups. The obtained poly(amide thioether)s were characterized; they coordinate mercury (II) with a high degree of selectivity.     

Preparation of multiphase block copolymers by redox polymerization process

Redox polymerization of methylmethacrylate (MMA) using Ce(IV) with poly(oxyethylene) having azo and hydroxy functions was carried out to yield methylmethacrylate-ethylene glycol block copolymers with labile azo linkages in the main chain. These prepolymers were used to initiate the radical polymerization of styrene through the thermal decomposition of the azo group, resulting in the formation of multiblock copolymers. Successful blocking has been confirmed by fractional precipitation, a strong change in the molecular weight distribution and spectral measurements.     

Deposition and Characterization of Si Substituted Cu2ZnSnS4 Thin Films

Silicon - The influence of the Si substitution ratio on the structural, morphological, and optical properties of Cu2ZnSnS4 (CZTS) thin films was examined. The Cu2Zn(SixSn1–x)S4 thin films...     

Polyurethaneurea–silica nanocomposites: Preparation and investigation of the structure–property behavior

Nanocomposites consisting of thermoplastic polyurethane–urea (TPU) and silica nanoparticles of various size and filler loadings were prepared by solution blending and extensively characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), thermal analysis, tensile tests, and nanoindentation. TPU copolymer was based on a cycloaliphatic diisocyanate and poly(tetramethylene oxide) (PTMO-2000) soft segments and had urea hard segment content of 20% by weight. TPU/silica nanocomposites using silica particles of different size (29, 74 and 215 nm) and at different loadings (1, 5, 10, 20 and 40 wt. %) were prepared and characterized. Solution blending using isopropyl alcohol resulted in even distribution of silica nanoparticles in the polyurethane–urea matrix. FTIR spectroscopy indicated strong interactions between silica particles and polyether segments. Incorporation of silica nanoparticles of smaller size led to higher modulus and tensile strength of the nanocomposites, and elastomeric properties were retained. Increased filler content of up to about 20 wt. % resulted in materials with higher elastic moduli and tensile strength while the glass transition temperature remained the same. The fracture toughness increased relative to neat TPU regardless of the silica particle size. Improvements in tensile properties of the nanocomposites, particularly at intermediate silica loading levels and smaller particle size, are attributed to the interactions between the surface of silica nanoparticles and ether linkages of the polyether segments of the copolymers.     

Recent advances in the preparation of functionalized polysulfones

This review summarizes the studies related to chemical functionalization of polysulfones used in many different applications such as membranes with special functions, nanocomposites, biofilm formation, fuel cells etc. reported in recent years from the literature since 2000. Various strategies have been applied for the functionalization of polysulfones. One strategy is to add desired functionality into starting monomers in the solution containing the main components of commercial polysulfones, the aromatic dihalide sulfone and bisphenol monomers, or to functionalize the related monomers before the condensation. Another approach is to form difunctional polysulfone oligomers. Then, functional groups can be utilized to react with monomers or other polymers to obtain functional polymers or block copolymers. The most applied method is post‐modification of commercially available polysulfones by incorporation of functional groups to their aromatic groups and their use in the formation of graft polymers or polysulfone‐based networks. © 2013 Society of Chemical Industry     

Effect of different surface shapes formed by femtosecond laser on zirconia-resin cement shear bond strength

Objective: The purpose of this study was to evaluate the effect of different surface shapes formed by femtosecond (FS) laser on zirconia (Y-TZP)-resin cement shear bond strength (SBS). Background data: All ceramic restoration is used as an alternative to metal-ceramic restorations, due to its better aesthetics, strength, and toughness properties. However, bond strength of restoration to tooth and other materials is effective to long term success of the restoration, and to achieve it surface treatment is required on ceramic surface. Materials and methods: Forty square-shaped zirconia samples were prepared and assigned to four groups of 10. The details of the groups are as follows: Group A, square-shaped recessed surface; Group B, square-shaped projection surface; Group C, circular-shaped recessed surface; Group D, circular-shaped projection surface. The SBSs values were performed with a universal testing machine at a crosshead speed of 1 mm/min. The data were analyzed statistically using analysis of variance (ANOVA) and Tukey HSD multiple comparisons tests. Results: The one-way ANOVA results on SBSs of the zirconia material bonded with resin cement revealed significant differences among the groups (p < 0.05). The Tukey HSD test results revealed that Group B and D had significantly higher SBS values than other groups (p < 0.05), but there were no significant differences between each other (p > 0.05). Additionally, Group A and C had significantly lower values than other groups (p < 0.05). Conclusions: Different surface shapes formed by FS laser provided a significant increase in SBSs. The SBS values of projection surfaces of circular and square-shapes are greater than that of recessed surfaces of circular and square-shapes.     

Effect of different denture adhesives on retention of complete dentures: an in vivo study

The increase in prevalence of tooth loss with the effect of population aging produces the growing need for complete dentures. The success and acceptance of complete dentures by the patient depends on sufficient retention and stability. Therefore, denture adhesives are regularly used by denture wearers to improve the function of complete denture. We evaluated the effect of three different denture adhesives (Corega, Protefix, Fittydent) on the retention of maxillary complete denture (MCD) using with digital dynamometer (DD). For this purpose, denture adhesives were applied on MCDs of 30 participants. After chewing procedure, the force was applied at 45° to the palatal surface of denture by DD. Dislodgement force was recorded by means of Newton. There were four measurements on each patient including; group of control: Group C; Group CR: Corega; Group F: Fittydent; Group P: Protefix. The result of the study was statistically evaluated by using analysis of variance (ANOVA) and Tukey HSD test. Statistics of ANOVA showed a significant difference among all the four groups (p = 0.00, <0.05). Tukey HSD test indicated that there was a statistical difference between Group F and the other groups, but there was not a significant difference between the other groups. The highest adhesive strength value was observed in group F, the lowest in group C. Use of denture adhesives improved the retentive strength of complete denture.     

Development of a semi-quantitative food frequency questionnaire for use in United Arab Emirates and Kuwait based on local foods

Background  

The Food Frequency Questionnaire (FFQ) is one of the most commonly used tools in epidemiologic studies to assess long-term nutritional exposure. The purpose of this study is to describe the development of a culture specific FFQ for Arab populations in the United Arab Emirates (UAE) and Kuwait.