A simple hyperchaos generator based on impulsive switching

This paper studies a simple hyperchaos generator. The circuit consists of three capacitors, three voltage-controlled current sources, and one state-dependent impulsive switch. The circuit dynamics are described by a normal form equation and a two-dimensional noninvertible return map is derived. The return map is calculated precisely using the exact piecewise solution and hyperchaos generation is guaranteed by two positive Lyapunov exponents of the return map. Using a simple test circuit, a typical hyperchaotic attractor can be verified in the laboratory.     

A 120-W Boost Converter Operation Using a High-Voltage GaN-HEMT

A boost converter with a 940-V/4.4 A GaN-HEMT as the main switching device was demonstrated to show the possibility of using high-voltage GaN-HEMTs in power electronic applications. The demonstrated circuit achieved an output power of 122 W and a power efficiency of 94.2% under a drain peak voltage as high as 350 V and a switching frequency of 1 MHz. The dual field-plate structure realized high-voltage switching operation with high power efficiency as dynamic on-resistance was suppressed by an increase of the current collapse phenomena.     

Microwave switch: LAMPS (light-activated microwave photoconductive switch)

A new microwave switch, the light-activated microwave photoconductive switch consisting of a heterostructure photoconductive switch (HPCS) with a flip-chip bonded vertical-cavity surface-emitting laser is reported. An insertion loss of 0.17 dB at a laser power of 15 mW and an isolation of 25 dB were obtained at 1 GHz. Excellent linearity was obtained with second and third order intercepts measured at 960 MHz of SOI=115 dBm and TOI=65 dBm at 960 MHz, respectively.     

Semisuperjunction MOSFETs: new design concept for lower on-resistance and softer reverse-recovery body diode

A new superjunction (SJ) structure offering remarkable advantages compared with the conventional SJ structure is proposed and demonstrated for a power-switching device. In the proposed structure (semi-SJ structure), an n-doped layer is connected to the bottom of the SJ structure. According to the results of experiment and simulation, the semi-SJ structure has both lower on-resistance and softer recovery of body diode than conventional SJ MOSFETs. The fabricated semi-SJ MOSFETs with breakdown voltage of 690 V realize on-resistance 28% lower than that of the conventional SJ MOSFET with same aspect ratio. The softness factor of the body diode is also improved by a factor of five. The proposed MOSFET is very attractive for H bridge topology applications, such as switching mode power supplies and small inverter systems, thanks to the low on-resistance and the soft recovery body diode.     

DNA Computing Boosted by a Cationic Copolymer

The huge information storage capability of DNA and its ability to self‐assemble can be harnessed to enable massively parallel computing in a small space. DNA‐based logic gates are designed that rely on DNA strand displacement reactions; however, computation is slow due to time‐consuming DNA reassembly processes and prone to failure as DNA is susceptible to degradation by nucleases and under certain solution conditions. Here, it is shown that the presence of a cationic copolymer boosts the speed of DNA logic gate operations that involve multiple and parallel strand displacement reactions. Two kinds of DNA molecular operations, one based on a translator gate and one on a seesaw gate, are successfully enhanced by the copolymer without tuning of computing conditions or DNA sequences. The copolymer markedly reduces operation times from hours to minutes. Moreover, the copolymer enhances nuclease resistance.     

Fabrication and current-drive of SiGe/Si 'Micro-origami' epitaxial MEMS device on SOI substrate

A micromirror structure with SiGe/Si heteroepitaxial layer on a silicon-on-insulator (SOI) substrate using a 'Micro-origami' technique has been successfully fabricated. The micromirror is supported by two curved hinge structures. The device is driven by application of a current, and net angular displacements larger than 10/spl deg/ (static) and 30/spl deg/ (in resonance) were obtained. These values are comparable with or even larger than the reported values for other MEMS optical switches or beam scanning devices. The experimental results suggest that the movement is evoked by a thermal effect. The Micro-origami device has advantages of low operation voltage smaller than 2 V, and structural compatibility with the Si or SiGe LSIs.     

Annealing effects of a high-quality ZnTe substrate

The sharp photoluminescence (PL) and optical-reflection spectra in the bandedge region of the high-quality nondoped ZnTe substrate (100) were observed at 4.2 K. Free exciton, associated with lower and upper polaritons (EX^L and EX^U) at 2.382 eV and 2.381 eV, respectively, were clearly observed. This meant that this substrate was high quality. The intensity of a bound exciton peak (2.375 eV), which is caused by a Zn vacancy, of a neutral acceptor decreased with an increase of the Zn vapor pressures.     

Fabrication of long-period fibre grating by CO/sub 2/ laser-annealing in fibre-drawing process

Long-period fibre grating (LPFG) writing by a CO₂ laser-annealing using a fibre-drawing process is demonstrated. The fibre in the drawing process was irradiated periodically by a CO₂ laser to modify the refractive index. An LPFG with transmission loss of -10 dB and full width at half-maximum of 13 nm has been fabricated. Results show that the refractive index change was induced by stress at the moment of laser annealing     

Durable Ultraflexible Organic Photovoltaics with Novel Metal‐Oxide‐Free Cathode

Flexible and stretchable organic photovoltaics (OPVs) are promising as a power source for wearable devices with multifunctions ranging from sensing to locomotion. Achieving mechanical robustness and high power conversion efficiency for ultraflexible OPVs is essential for their successful application. However, it is challenging to simultaneously achieve these features by the difficulty to maintain stable performance under a microscale bending radius. Ultraflexible OPVs are proposed by employing a novel metal‐oxide‐free cathode that consists of a printed ultrathin metallic transparent electrode and an organic electron transport layer to achieve high electron‐collecting capabilities and mechanical robustness. In fact, the proposed ultraflexible OPV achieves a power conversion efficiency of 9.7% and durability with 74% efficiency retention after 500 cycles of deformation at 37% compression through buckling. The proposed approach can be applied to active layers with different morphologies, thus suggesting its universality and potential for high‐performance ultraflexible OPV devices.     

Numerical Analysis of the Boundary Scattering Effect on Transport Properties in Bi-Sb Nanowires

In this study, we have numerically analyzed the transport properties of Bi-Sb nanowires, taking into account wire boundary scattering. Wire boundary scattering slightly decreased the Seebeck coefficient of Bi-Sb nanowires. This effect is due to the observation that boundary scattering and the mobility ratio of L-point electrons to T-point holes in the nanowires are smaller than those in bulk Bi-Sb because the wire boundary scattering suppresses the mobilities of L-point electrons and heavy holes. The largest Seebeck coefficient for all wire diameters was obtained when the Sb concentration was 5 at.%. The effective mass approached zero near 5 at.% Sb, and the small effective mass led to a large subband shift in each band. Thus, a small effective mass enhances the quantum effect at a fixed wire diameter, even if wire boundary scattering is taken into account.