Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Iterative Path Integral Approach to Nonlinear Stochastic Optimal Control Under Compound Poisson Noise

Nonlinear stochastic optimal control theory has played an important role in many fields. In this theory, uncertainties of dynamics have usually been represented by Brownian motion, which is Gaussian white noise. However, there are many stochastic phenomena whose probability density has a long tail, which suggests the necessity to study the effect of non‐Gaussianity. This paper employs Lévy processes, which cause outliers with a significantly higher probability than Brownian motion, to describe such uncertainties. In general, the optimal control law is obtained by solving the Hamilton–Jacobi–Bellman equation. This paper shows that the path‐integral approach combined with the policy iteration method is efficiently applicable to solve the Hamilton–Jacobi–Bellman equation in the Lévy problem setting. Finally, numerical simulations illustrate the usefulness of this method.     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.     

A reconstruction algorithm from truncated projections

A new tomographic reconstruction method is proposed which permits the reconstruction of a region of interest within a slice from partially truncated scanning data. This method utilizes two types of source data, namely a series of truncated projections and the outline of the object's cross section. The principle of this algorithm is to estimate the outside area of truncation in one projection from the projection data of the other viewing angles and the outline data of the object. The above estimation is accomplished by following two repeated procedures: 1) the modification of the calculated projection data compared each time with the already measured projection data of the truncated area, and 2) the modification of the reconstructed image compared also each time with the shape of the object. Computer simulation shows the convergence of the results obtained by this algorithm thus verifying its validity, and a reconstructed image after iterative processes exhibits good quality.     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Development of Selective TGR5 Ligands Based on the 5,6,7,8-Tetrahydro-5,5,8,8-tetramethylnaphthalene Skeleton

TGR5, a G-protein-coupled receptor (GPCR), plays an important role in several physiological functions. TGR5 activation through bile acids induces an increase in energy expenditure. Therefore, synthetic TGR5 ligands could be useful for the treatment of obesity or dyslipidemia. In this study, we designed and synthesized a set of TGR5 ligands with a 5,6,7,8-tetrahydro-5,5,8,8-tetramethylnaphthalene (TMN) skeleton, and evaluated their TGR5 agonistic activity. We also investigated the selectivity of the synthesized compounds for TGR5 relative to the farnesoid X receptor (FXR) and retinoic acid receptor (RAR). Our results show that compound 4 b [N-(2-chlorophenyl)-5,6,7,8-tetrahydro-5,5,8,8-tetramethyl-2-naphthalenecarboxamide] exhibited potent TGR5 agonist activity with an IC₅₀ value of 8.4 nM without significant cytotoxicity. In addition, compound 4 b showed only slight agonistic activity toward FXR and RAR at 1 μM treatment. These data indicate that compound 4 b is a selective TGR5 agonist, and could be a promising therapeutic agent for dyslipidemia.     

Thermal and mechanical properties of bio-based polymer networks by thiol-ene photopolymerizations of gallic acid and pyrogallol derivatives

Allylated pyrogallol (A3PG) and acrylated pyrogallol (Ac3PG) as bio-based trienes, and allylated gallic acid (A4GA) and acrylated allyl gallate (Ac3A1GA) as bio-based tetraenes were synthesized from pyrogallol and gallic acid, respectively. Thiol-ene photopolymerizations of the bio-based polyenes and a pentaerythritol-based primary tetrathiol (pS4P) at the allyl/SH ratio of 1/1 produced photo-cured resins (A3PG-pS4P, Ac3PG-pS4P, A4GA-pS4P and Ac3A1GA-pS4P). The FT-IR spectral analysis revealed that thiol-ene reactions of thiol/allyl and thiol/acryloyl groups smoothly proceeded. Gel fractions of acryl-based cured resins were a little higher than those of allyl-based cured resins. The swelling test and dynamic mechanical analysis revealed that GA- and acryl-based cured resins exhibited higher crosslinking densities than PG- and allyl-based cured resins, respectively. A higher order of tan δ peak temperature was Ac3PG-pS4P (48.3 ° C) > Ac3A1GA-pS4P (24.1 ° C) > A4GA-pS4P (22.1 ° C) > A3PG-pS4P (?7.8 ° C). Ac3PG-pS4P displayed the highest 5 % weight loss temperature, tensile strength and tensile modulus among all of the cured resins.     

A Study of Mutual Coupling between Vertical Grounding Electrodes

This paper investigates the mutual grounding impedance between vertical grounding electrodes based on field measurements and FDTD simulations. In the case of vertical electrodes, the mutual impedance between the electrodes is almost completely independent of the electrode length, and thus the induced voltage is nearly constant as the electrode length becomes longer. This characteristic is different from that of an overhead conductor, where the electromagnetic‐induced voltage is proportional to the conductor length. The greater the separation distance between the electrodes, the smaller the induced voltage, as in the case of an overhead conductor. The propagation speed increases as the separation increases. It is found that the speed is not necessarily proportional to the inverse of the relative permittivity of the earth.