Fast drive of displacement magnification mechanism with flexure hinge using loading type impact damper

A displacement magnification mechanism which uses flexure motion guide using elastic hinges can realize smooth frictionless motion but has poor vibration damping capability. An impact damper is a damping mechanism which uses collision energy to dissipate vibration energy. If the damper is used for vibration control of the flexure mechanism, it may be able to dissipate unexpected vibration without killing the merits of the flexure mechanism. In the paper, a loading type impact damper is applied to settle down transient vibration of a displacement magnification mechanism. We investigate differences of damping effect by setting conditions of the damper. It is shown that the impact damper can eliminate residual vibration at step response effectively without steady state error. The experimental displacement magnification mechanism with impact damper can settle down less than 1/5 of the response without the damper under appropriate setting conditions. Influence of natural frequency ratio between damper and displacement magnification mechanism is investigated. Influences of indentation at impact point are also examined.     

Shift-multiplexed microhologram fabrication with photoisomeric chromophores

Microholographic memory is an attractive storage system for its capability to hold high-density data and for its access time. Using a photochromic chromophore (diarylethene)-doped recording medium can give rise to microholographic memory's durability and contrast. In addition, it is possible to increase the microholographic memory's density by shift-multiplexed recording, since a hologram pit is constructed in a small area. The microhologram was fabricated in the diarylethene-based sample with two counterpropagating focused beams. Also, surface images and cross-sectional images scanned by a confocal microscope indicated that shift-multiplexed recording was achieved in high contrast.     

The effect of surface modification with carbon nanotubes upon the tensile strength and Weibull modulus of carbon fibers

Carbon fibers are widely used as reinforcements in composite materials because of their high specific strength and modulus. Today, a number of ultrahigh strength polyacrylonitrile (PAN)-based (more than 6?GPa), and ultrahigh modulus pitch-based (more than 900?GPa) carbon fibers have been commercially available. In contrast, carbon nanotube (CNT) with the extremely high tensile strength have attracted attention as reinforcements. An interesting technique to modify the carbon fiber is CNT grafting on the carbon fiber surface. CNT-grafted carbon fibers offer the opportunity to add the potential benefits of nanoscale reinforcement to well-established fibrous composites to create micro-nano multiscale hybrid composites. In the present study, the tensile properties of CNT grown on T1000GB PAN- and K13D pitch-based carbon fibers have been investigated. Single filament tensile test at gauge lengths of 1, 5, and 25?mm were conducted. The effect of gauge length on tensile strength and Weibull modulus of CNT-grafted PAN- and pitch-based carbon fibers were evaluated. It was found that grafting of CNT improves the tensile strength and Weibull modulus of PAN- and pitch-based carbon fibers with longer gauge length (≥5?mm). The results also clearly show that for CNT-grafted and as-received PAN- and pitch-based carbon fibers, there is a linear relation between the Weibull modulus and the average tensile strength on log–log scale.     

Large eddy simulation of methane non-premixed flame using the laminar flamelet model

The large eddy simulation (LES) using the steady laminar flamelet model is applied to a simple turbulent jet flame with 33.2% H2, 22.1% CH4 and 44.7% N2 at the Reynolds number of 15,200 in order to validate the numerical methods and to investigate the flame structure. For the validation, the detailed experimental data of DLR-A flame is used. The numerical results are in reasonable agreement with experimental results except mass fractions of minor species. In the flow field, the break-down of the potential core, the vortex structure and the mixing intensity are well captured. In the combustion field, mass fractions of major species (H2O, CO2, CO) are well predicted quantitatively. Minor species are well predicted qualitatively. In the present study, the simulations conducted on the Cartesian and cylindrical grids with approximately 6.6× 10⁵ nodes are compared.     

A noninvasive method for assessing interior skin damage caused by chronological aging and photoaging based on near-infrared diffuse reflection spectroscopy

This paper reports a noninvasive method for evaluating skin aging based on near-infrared diffuse reflectance (NIR-DR) spectroscopy. Skin aging can be attributed to photoaging and chronological aging. Both types of aging are heavily involved in the skin changes that occur as we get older, for example, wrinkles or sagging skin. Our goal is to develop a noninvasive way to assess changes taking place inside the skin for each type of aging by using NIR-DR spectroscopy. Interior skin damages caused by photoaging and chronological aging were studied for an ultraviolet-B (UVB)-irradiated hairless mouse group (24 mice) and a non-irradiated group (29 mice) by using NIR-DR spectroscopy and principal component analysis (PCA). The results suggested the possibility of monitoring the contribution and the quantitative assessment of both types of aging taking place inside the skin by using the 5990-5490 cm(-1) and 5000-4480 cm(-1) regions of NIR-DR spectra. For the photoaging, structural changes in proteins are most clearly reflected by a shift of the band near 4880 cm(-1) due to a combination of amide A and amide II modes. On the other hand, the chronological aging is associated with a change in collagen quantity as is seen in the intensity changes in NIR bands assigned to collagen. NIR-DR spectroscopy and PCA may allow us to noninvasively assess the degree of photoaging and chronological aging as the degeneration of elasticity in collagen protein and the degradation of protein quantity, respectively.     

Direct evidence for covalent functionalization of carbon nanohorns by high-resolution electron microscopy imaging of C60 conjugated onto their skeleton

Carbon nanohorns (CNHs) functionalized with aryl units, possessing ethylene glycol chains terminated to amine groups, were condensed with modified C₆₀ carrying a free carboxylic acid group. Direct evidence for the covalent functionalization of CNHs was given by high-resolution transmission electron microscopy (HR-TEM) imaging of C₆₀ present in that CNH hybrid material. In addition, it was found that C₆₀ remained unaffected even after prolonged exposure to the electron beam. Finally, monitoring the wave motion of the connecting ethylene glycol chains, through sequential HR-TEM images, further proved the stability of the covalent bond that links the two carbon nanostructures.     

Accumulative gene integration into a pre-determined site using Cre/loxP

Site-specific gene recombination systems, such as Cre/loxP, have been used for genetic modification of cells and organisms in both basic and applied research. We previously developed an accumulative gene integration system (AGIS), in which target gene cassettes could be repeatedly integrated into a pre-determined site on a plasmid or cellular genome by recombinase-mediated cassette exchange (RMCE), using Cre and mutated loxPs. In the present study, we designed a simplified AGIS. For gene integration into a target site, the previous system used two loxP sites in the acceptor DNA, whereas the new system uses a single loxP site. The gene integration reactions were repeated four times in vitro using Cre protein and specific plasmids. The expected integration reactions mediated by Cre occurred at the loxP sites, resulting in integration of four target genes. The system was also used for genomic integration of reporter genes using Chinese hamster ovary (CHO) cells. The reporter genes were efficiently introduced into the CHO genome in a Cre-dependent manner, and transgene expression was detected after the integration reaction. The expression levels of the reporter genes were enhanced, corresponding to the increase of transgene copy number. Recombinase-mediated AGIS provides a useful tool for the modification of cellular genomes.     

Detection of genes involved in fatty acid elongation and desaturation in thraustochytrid marine eukaryotes

Heterotrophic marine protists known as thraustochytrids can synthesize polyunsaturated fatty acids (PUFAs) such as docosahexaenoic acid (DHA). The biosynthetic pathways of PUFAs in thraustochytrids are poorly understood, however. In this study, we attempted to reveal the enzymes involved in DHA synthesis in thraustochytrids. Nine thraustochytrid strains representing 3 genera (Aurantiochytrium, Schizochytrium, and Thraustochytrium) were used for PCR-based detection of the genes encoding Δ5-elongase and Δ4-desaturase and for fatty acid analysis. The degenerate primers were designed to amplify the Δ5-elongase and Δ4-desaturase genes, and the partial sequences of the enzymes were obtained from the genera Thraustochytrium and Schizochytrium. These fragments were identical to those of known Δ5-elongase and Δ4-desaturase. Neither Δ5-elongase nor Δ4-desaturase was detected in the strains belonging to the genus Aurantiochytrium, however, suggesting that this group likely synthesizes DHA not via the elongation/desaturation pathway but via an alternate pathway such as the polyketide synthase pathway. The fatty acid profiles of thraustochytrids were consistent with the presence of genes involved in PUFA biosynthesis in thraustochytrid genera. Thus, our findings suggest that two biosynthetic pathways for PUFAs exist in these organisms.